Our Products
We are leaders in the market for providing best range of ACTIVE SUB ENCLOSURES NBS210A, NAKAMICHI COAXIAL-SPEAKERS NSE1628, UNDERSEAT ACTIVE SUBWOOFERS NBF8.2A, ACTIVE SUB ENCLOSURES NBX30A and ACTIVE SUB ENCLOSURES NBX255A
Please share your contact number. Or you can reach us at:
Email: nakamichicaraudioindia@Phone: +91-11-45699900
| N-Power: | 20W |
| Impedance: | 3Ω |
| Sensitivity (dB/W/m): | 89±3dB |
| Frequency Response: | 270Hz - 20kHz |
| Voice Coil: | Φ25.5 mm KSV |
| Cone Material: | Silk |
| Magnet Type: | Neodymium |
| Dimensions: | 70mm x 70mm x 49mm |
| Net Weight: | Approx. 0.24kg (1 pc) |
| N-Power: | 15W |
| Impedance: | 6Ω |
| Sensitivity (dB/W/m): | 86dB±3dB |
| Frequency Response: | 1.2kHz - 20kHz |
| Voice Coil: | Φ30mm ASV |
| Cone Material: | Silk |
| Magnet Type: | Neodymium |
| Dimensions: | 61.6x71.5x82.1mm |
| Net Weight: | 0.22kg |
TREATED COMPOSITE PAPER CONE Our treated composite paper cone allows for a lightweight design, allowing our speaker to be more responsive, while still maintain its durability. 25MM SILK DOME TWEETER Our silk dome tweeter has been engineered to be lighter, enhancing sound reproduction efficiency while maintaining the same volume level as well as to ensure the smoothest highs. DURABLE RUBBER SURROUND Rubber surround for flexibility and durability in extreme conditions within your vehicle.
| PRODUCT INFORMATION | NSE-CS6957 |
|---|---|
| Speaker type: | 6*9"(16.5*23.5cm)2-way |
| Mounting depth(woofer) | >2.9"(73mm) |
| Mounting depth (tweeter): | 0.7" (17.5mm) |
| N-power: | 40 watts |
| Peak Power: | 400 watts |
| Sensitivity (1W/m): | 90±3dB |
| Frequency response: | 60-20kHz |
| Impedance: | 4 ohms |
| Voice coil: | KSV 25.5mm |
| Voice coil: | KSV 25.5mm |
| Magnet mass: | 12 Oz (340g) |
| Net mass: | Approx. 2.4kg |
| FM Frequency Range | 87.5MHz-108.0MHz |
| AM Frequency Range | 522KHz-1620KHz |
| Preset | 18 FM,12 AM |
USB INDEX
| Usable Audio Formats | MP3/WMA |
| USB Port Type | 2.0 |
| USB Maximum Capacity | 64G |
| USB Charging | 5V/1A |
| Frequency Response | 20Hz-20 KHz |
| S/N Ratio | 60dB |
BLUETOOTH
| Version | Bluetooth 5.1 |
| BT Profile supports | A2DP,AVRCP/HFP |
| Range of frequency | 2.4 GHz spectrum |
| Power supply Requirement | DC12V |
| Maximum power output | 50w x 4CH |
| Speaker impedance | 4-8 Ohm |
| Unit Dimensions(WxHxD) | 178x111x50mm |
| Weight | 0.45kg |
| Fuse | 10A |
RADIO
| FM Frequency Range | 87.5MHz-108.0MHz |
| AM Frequency Range | 522KHz-1620KHz |
| Preset | 18 FM,12 AM |
USB INDEX
| Usable Audio Formats | MP3, WMA, AAC, FLAC |
| USB Port Type | 2.0 |
| USB Maximum Capacity | 64G |
| USB Charging | 5V/1A |
| Frequency Response | 20Hz-20 KHz |
| S/N Ratio | 60dB |
BLUETOOTH
| Version | Bluetooth 5.1 |
| BT Profile supports | A2DP,AVRCP, HFP |
| Range of frequency | 2.4 GHz spectrum |
GENERAL
| Operating Voltage | 14.4V(10.8V allowable) |
| Maximum Current | 10A |
| Installtion Size(W×H×D) | 182mm×53mm×115mm |
| Net Weight | 0.5kg |
| Fuse | Small fuse 10A(Red) |
AUDIO
| Maximum Output Power | 50W×4 |
| Speaker Impedance | 4-8ohm |
| Pre-output Level | 4V |
RADIO
| FM Frequency Range | 87.5MHz-108.0MHz |
| AM Frequency Range | 522KHz-1710KHz |
| Preset | 18 FM,12 AM |
USB
| USB Standard | USB1.1,USB2.0 Full Speed |
| Audio | MP3/WMA/APE/FLAC/AAC/M4A/WAV |
| Front USB | Read/charge DC 5V 2A |
BLUETOOTH
| Version | Bluetooth 5.0 |
| Frequency Range | 2.402GHz - 2.480GHz |
| Communication Range | Line of sight approx.10m |
| Profile | HPF1.6/A2DP/AVR/SPP |
| NCDSC-12 | NCDSC-16 | NCDSC-18 | |
| Product Type | 12GA high Performance Cables | 16GA high Performance Cables | 18GA high Performance Cables |
| Construction | 7×42/0.12mm | 7×16/0.12mm | 66/0.12mm |
| Power supply Requirement | DC12V | Power supply Requirement | DC12V |
| Outer Diameter | 4.5+4.5mm,square/Circular Design | 3.2+3.2mm,square/Circular Design | 2.5+2.5mm,square/Circular Design |
| Composition | OFC | OFC | OFC |
| Accessories | With Protective End Cap | With Protective End Cap | With Protective End Cap |
| Length | 30 Meter | 70 Meter | 100 Meter |
| NCGSC-12 | NCGSC-14 | NCGSC-16 | NCGSC-18 | |
| Product Type | 12GA high Performance Cables | 14GA high Performance Cables | 16GA high Performance Cables | 18GA high Performance Cables |
| Construction | 3.35/0.20mm | 66/0.20mm | 42/0.20mm | 25/0.20mm |
| Outer Diameter | 4.5+4.5mm, | 3.6+3.6mm, | 3.2+3.2mm, | 2.5+2.5mm, |
| square/Circular Design | square/Circular Design | square/Circular Design | square/Circular Design | |
| Composition | OFC | OFC | OFC | OFC |
| Accessories | With Protective End Cap | With Protective End Cap | With Protective End Cap | |
| Length | 30 Meter | 50 Meter | 70 Meter | 100 Meter |
| DESCRIPTION | COLOR | SPECIFICATION | MATERIAL |
| 8GA Power Cable | Solid Red | 7*27*0.2CCA OD:6.5MM | CCA |
| 8GA Ground Cable | Solid Black | 7*27*0.2CCA OD:6.5MM | CCA |
| 15GA speaker cable | Solid Red + Solid Black | 30*0.2CCA*2 OD:4.0*8.0MM | CCA |
| RCA Cable | Solid Red | 15*0.12*CU*2C*2F OD:4.0*8.0MM | CCA |
| Remote Cable | Black | 20*2.0CCA OD:2.0MM | CCA |
| AGU Fuse Holder | Transparent Black | 60A MINI ANL Fuse | CCA |
| 8GA Ring Terminal | 1 Red, 1 Black | 70 Meter | CCA |
| 8GA Spade Terminal | 1 Red, 1 Black | 70 Meter | CCA |
| Cable Ties | 70 Meter | CCA |
| DESCRIPTION | COLOR | SPECIFICATION | MATERIAL |
| 4GA Power Cable | Solid Red | 7*70*0.2CCA OD:10MM | CCA |
| 4GA Ground Cable | Solid Black | 7*70*0.2CCA OD:10MM | CCA |
| 12GA speaker cable | Solid Red + Solid Black | 62*0.2CCA*2 OD:4.0*8.0MM | CCA |
| RCA Cable | Solid Red | 15*0.12*CU*2C*2F OD:4.0*8.0MM | OFC |
| Remote Cable | Black | 20*2.0CCA OD:2.0MM | CCA |
| MINI ANL Fuse Holder | Transparent Black | 80A MINI ANL Fuse | |
| 4GA Ring Terminal | 1 Red, 1 Black | ||
| 4GA Spade Terminal | 1 Red, 1 Black |
SPECIFICATIONS
INSTALLATION
Please read these instructions carefully before installation and use. Installation should be performed by professional staff.
1. Wire Connection
Connect the 12V power to the red jack using the Included Im cable. Use the included 5m cable to connect the yellow RCA to your video monitor.
Attention: The camera switch is controlled by the reverse Gear shift.
2. Installation Method
The camera can be installation the following way:
a. External installation (Fig.1)
b. Bracket-mount: Install in the rear bumper or on the License plate. Fix the camera with screws. car body
Connecting the AC2 Remote to our Nakamichi DSPs allows you to control your DSP by allowing you to choose the presets you've prepared in advance in your DSP and also allows you to control the volume levels for the selected channels.
SPECIFICATIONS
Additional Information:
Packaging Details : WHATS IN THE BOX
AC2 controller x 1pc
User Manual (One In English and Chinese) x 2pcs
Screw x 2pcs
Velcro x 2pcs
Nakamichi India (Nakamichi Car Audio)
Supreme Audiotronics Pvt Ltd A-62, Naraina Industrail Area Phase-1, New Delhi- 110028 India
Share us via
