Air Compressor #7774425

Kulmec Diesel Air Compressor 450 CFM - 650 CFM are advanced, oil injected Diesel Powered Portable screw compressor. Kulmec's portable compressors are specially designed for heavy-duty, harsh environments. They are totally at home in the renovation industry and quarries, are ideal for sandblasting applications, and operate reliably at high altitudes and extremes of temperature. Powered by an ultra-efficient engine, these compressors give you a reliable source of compressed air for your applications, or for combinations of your pneumatic tools such as rock drills and hammers. All models meet the latest exhaust emission and noise directive criteria

FEATURES

• World Class Air End- Low rotor speed, few moving parts & efficient design of compressor minimizes wear & tear, ensuring reliability and long working life
• Clean Intake Air- High performance two-stage air intake filter prevents dust & dirt particles from entering the compressor.
• Ease of Operation- All the controls are grouped on a single panel for easy monitoring, safety and fool-proof operation.
• Regulation- Auto Load/Unload regulation of the compressor can be done between set pressure limits.
• Service Valves- The compressor is provided with adequate service valves.
• Easy Access- The canopy doors open outwards providing easy access to the machine. With doors up and out of the way, routine maintenance can be performed in less time.
• Operating Economy- You can count on economical Electric consumption and continuous airflow at stable pressure as it's fully automated stepless control constantly adapts the compressor output to air demand.
• Environment Friendly- Efficient noise dampening canopy & state-of-the-art Electric Motors that are low on Electric consumption makes our compressors environment friendly.

APPLICATION

• Cable laying
• Construction sites
• Mining
• Sandblasting
• CBM (Coal Bed Methane)/oil & gas exploration

OPTIONS

• Aftercooler
• Rear bumper
• Brakes
• Hose reels, single and dual
• Mechanical parking brakes
• Special paint
• Height adjustable tow bar

KB-10 to KB-50 booster compressors are well suited to applications needing modest air volumes at pressures upto 580 psig. Mounted on heavy-gauge base plates with anti-vibration pads, Kulmec boosters eliminate the need for reinforced foundations and floor fastenings For larger volumes of air, Kulmec Extra Pressure models offer a combination of higher flows and increased discharge pressures to 650 psig.* Mounted on heavy gauge steel bases with vibration isolators, these units offer smooth, quiet operation and eliminate the need for reinforced foundations and floor fastenings.All Kulmec boosters feature precision manufactured pumps with high quality cylinders.

KE 30-50 are innovative, oil injected Electrical Portable screw compressor. This single axle compressor is powered by a three phase TEFC squirrel cage motor with class F insulation and are suitable for varied application in Mining & construction industries. These compressors can be used for operating different tools like Rock Drills, Demolition Tools, Chipping Hammers, Rammpers/Tampers. Impact Wrenches, Grinding Tools & for Sand Blasting too.

FEATURES

• Standard Starter Panel Kulmec offers an enhanced starter control panel to monitor and regulate booster operation. The starter is designed to be wall-mounted in skid mounted and in-built in portable trolley mounted.
• High Quality Components With of experience of years machining quality components, Kulmec designs and builds its high quality pistons, cylinders, valves, and other components to exacting specifications. Completed boosters are factory-tested to our rigorous quality standards.
• Advanced Cylinder Technology Kulmec industrial booster cylinders are bored with super precision and finished by a special process that ensures minimum oil consumption and negligible wear for great durability.
• Effective Cooling The rugged after-cooler in our two cylinder machines is efficient and maintenancefree, achieving low compressed air outlet temperatures.
• Manual Belt Tensioning-A simple slide based v-belt tensioner makes it easy to adjust belt tension and avoid misalignment.
• Electric Motor Our premium, TEFC motors have class F insulation and are EISA compliant, 3-phase.
• Low Vibration Our boosters are built on durable steel base frames with anti-vibration mounts for quiet, smooth operation.
• Durable High Pressure Pumps Our high pressure pumps feature lower rotational speeds to promote extended operational life and consistent efficiency.
• Low Discharge Temperatures-A generously proportioned after- cooler keeps the compressed air outlet temperatures comfortably low on air-cooled models.
• Water-Cooled After-Cooler-A water-cooled after- cooler is offered on the KB-50 to achieve discharge approach temperatures as low as 11F.
• Forced lubrication-A forced lubrication system provides increased reliability and service life of the pump. Full-flow filtration extends the oil change interval.
• Instrument Panel-Our standard instrument panel contains gauges for air temperature, oil pressure, inlet air pressure, and discharge air pressure.

APPLICATION

• Blast hole drilling
• Line drill
• Water well boring
• Crawler drill
• Demolition Tools
• LD4 drilling
• Chipping Hammers
• Jack hammer / Rock drill
• Surface preparation (sand / shot / dry ice blasting)
• Shot creting

The Kulmec Hydraulic Motor powered Screw Air compressor, designed to be used with Hydraulic powered Equipments or vehicles. Kulmec Hydraulic Screw Air Compressor delivers 46cfm (1.3 m3/min) of air at 100 psi (7 bar). Kuimec Hydraulic Screw Air Compressoer are designed and built with robust frames and easily accessible components. This allows for ease of maintenance and reduced downtime.

features

• kulmec tractor mounted models run at low rpm which makes it fuel efficient(approximately 3.5 liter/hr on load*)
• lower load on tractor
• higher life & low maintenance
• air compressor spares are easily available in market.
• easy to move air compressor to other site
• tractor mounted models come in two variant models one which is installed on the tractor and the other mounted on two wheel trolley
• efficient work in hostile conditions

application

• mines and quarries
• pipeline laying
• bore cleaning
• construction sites
• abrasive blasting sites
• cement plants

features

• kulmec tractor mounted models run at low rpm which makes it fuel efficient(approximately 3.5 liter/hr on load*)
• lower load on tractor
• higher life & low maintenance
• air compressor spares are easily available in market.
• easy to move air compressor to other site
• tractor mounted models come in two variant models one which is installed on the tractor and the other mounted on two wheel trolley
• efficient work in hostile conditions

application

• mines and quarries
• pipeline laying
• bore cleaning
• construction sites
• abrasive blasting sites
• cement plants

FEATURES

• Installed on highly efficient electric motor and Starter.
• Higher life & low maintenance
• Kulmec Compressor spares are easily available in market
• Weight of the compressor is much lower than any other compressors, it is easy to move compressor to other site
• Kulmec Compressor is mounted on two wheel trolley with leaf spring, so it can be tow by vehicles like jeep or tractor
• Whole compressor unit is compact. Installed on Silent Canopy
• Air Compressors installed with micro filters to withstand dusty conditions
• Efficient work in hostile conditions

APPLICATION

• Mines and Quarries
• Pipeline Laying
• Bore cleaning
• Construction sites
• Abrasive blasting sites
• Cement Plants

Engine Driven Screw Air Compressor from 120 CFM - 400 CFMKD 120-400 are advanced, oil injected Diesel Powered Portable screw compressor. Kulmec, s portable compressors are specially designed for heavy-duty, harsh environments. They are totally at home in the renovation industry and quarries, are ideal for sandblasting applications, and operate reliably at high altitudes and extremes of temperature. Powered by an ultra-efficient engine, these compressors give you a reliable source of compressed air for your applications, or for combinations of your pneumatic tools such as rock drills and hammers. All models meet the latest exhaust emission and noise directive criteria

FEATURES

• World Class Air End- Low rotor speed, few moving parts & efficient design of compressor minimizes wear & tear, ensuring reliability and long working life
• Clean Intake Air- High performance two-stage air intake filter prevents dust & dirt particles from entering the compressor.
• Ease of Operation- All the controls are grouped on a single panel for easy monitoring, safety and fool-proof operation.
• Regulation- Auto Load/Unload regulation of the compressor can be done between set pressure limits.
• Service Valves- The compressor is provided with adequate service valves.
• Easy Access- The canopy doors open outwards providing easy access to the machine. With doors up and out of the way, routine maintenance can be performed in less time.
• Operating Economy- You can count on economical Electric consumption and continuous airflow at stable pressure as it's fully automated stepless control constantly adapts the compressor output to air demand.
• Environment Friendly- Efficient noise dampening canopy & state-of-the-art Electric Motors that are low on Electric consumption makes our compressors environment friendly.

APPLICATION

• Cable laying
• Construction sites
• Mining
• Sandblasting
• CBM (Coal Bed Methane)/oil & gas exploration

OPTIONS

• After cooler
• Rear bumper
• Brakes
• Hose reels, single and dual
• Mechanical parking brakes
• Special paint
• Height adjustable tow bar