Mumbai, Maharashtra, India
Our Products
Range:15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS.
Form:SEAMLESS / ERW / WELDED IN ROUND & SQUARE .
Stainless Steel :
ASTM / ASME SA 312 GR. TP 304 , 304L , 304H, 309S , 309H , 310S, 310H , 316 , 316TI , 316H , 316 LN , 317 , 317L , 321 , 321H , 347 , 347 H , 904L .
ASTM / ASME SA 358 CL 1 & CL 3 GR . 304 , 304L , 304H, 309S , 309H , 310S, 310H , 316 , 316H , 321 , 321H , 347 .
Duplex Steel :ASTM / ASME SA 790 UNS NO S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Range :15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS
Form :SEAMLESS / ERW / WELDED IN ROUND & SQUARE .
Carbon Steel :ASTM / ASME A 53 GR. A , B
ASTM / ASME 106 GR. A , B , C .
API 5L GR. B , API 5L X 42 , X 46 , X 52 , X 60 , X 70.
ASTM / ASME A 691 GRA , B , C
Alloy Steel:
ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91
ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.
Range :15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS
Form :SEAMLESS / ERW / WELDED IN ROUND & SQUARE .
Nickel Alloy :ASTM / ASME SB 163 UNS 2200 ( NICKEL 200 )
ASTM / ASME SB 163 UNS 2201 (NICKEL 201 )
ASTM / ASME SB 163 / 165 UNS 4400 (MONEL 400 )
ASTM / ASME SB 464 UNS 8020 ( ALLOY 20 / 20 CB 3 )
ASTM / ASME SB 704/705 UNS 8825 INCONEL (825)
ASTM / ASME SB 167 / 517 UNS 6600 (INCONEL 600 )
ASTM / ASME SB 167 UNS 6601 ( INCONEL 601 )
ASTM / ASME SB 704 /705 UNS 6625 (INCONEL 625)
ASTM / ASME SB 619/622/626 UNS 10276 ( HASTELLOY C 276 )
Copper Alloy :ASTM / ASME SB 111 UNS NO. C 10100 , 10200 , 10300 , 10800 , 12000, 12200, 70600 , 71500 . ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30)
Grades :Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23
Type:Seamless / Erw / Welded/ Fabricated
Range :15 NB UP TO 600 NB IN SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 etc.
Form Round, square, rectangular, hydraulic etc.
Length Single Random, Double Ranidom & Cut Length
End Plain End, Bevelled End, Treaded
Range :
0.1 mm to 100 mm thick upto 2500 mm width & upto 8000 mm length available with NACE MR 01-75s.
Stainless Steel :
ASTM / ASME SA 240 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 317L , 321 , 321H , 347 , 347 H , 409 , 410 , 410S , 430
Duplex Steel :
ASTM / ASME SA 240 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Range :
3 mm to 100 mm thick in upto 2500 mm width upto 12500 mm length available with NACE MR 01-75s
Carbon Steel :
ASTM / ASME A 516 / 517 GR. 60 / 70 , IS 2062 , IS 2002
Alloy Steel :
ASTM / ASME A 387 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91.
Sheet and plates Range :
5 mm to 100 mm thick in upto 2500 mm width & upto 6000 length available with NACE MR 01-75s.
Nickel Alloy :
ASTM / ASME SB 162 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 )
ASTM / ASME SB 127UNS 4400 (MONEL 400 )
ASTM / ASME SB 424 UNS 8825 (INCONEL 825)
ASTM / ASME SB 168UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 )
ASTM / ASME SB 443 UNS 6625 (INCONEL 625)
ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 )
ASTM / ASME SB 462 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Sheet and plates Grades :Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DS
Type:Seamless / Erw / Welded/ Fabricated
Standard :ASTM B407, ASTM B829, ASTM B514, ASTM B775, ASTM B515, ASTM B751
This range is used in :
Petrochemicals Plants
Oil Refineries
Fertilizers Plants
Sugar Mills
Chemical Plants
Pharmaceuticals
Textile Machinery
Sheet and plates Specifications
1)hot and coll rolled, Gr1Gr23
2)Thickness:0.3mm - 60mm
3)Length:6000mm
4)ASTM B265, ASTM 4911, F67, F136
Titanium alloy grade:GR5 (6% Al, 4%V)
GR6 (5% AL, 2.5%Sn)
Gr.7 (Titanium + Pd)
Gr.9 (3% Al, 2.5%V)
Gr.10 (11.5%Mo, 6% Zr, 4.5% Sn)
Gr.11 (Titanium + Pd)
Gr.12 (0.3% Mo, 0.8% Ni)
| Common Specification | Specification | Product Form |
| ASTM B265(Gr2 | Sheet,Strip and Plate | |
| ASTM B338 | Tube,Seamless and Welded | |
| ASTM B348(Gr2) | Bars and Billets | |
| ASTM B861 | Seamless Pipe | |
| ASTM B863 | Wire | |
| ASTM F67(Gr2) | Unalloyed Titanium for Surgical Implants |
We are factory specializing in the manufacture and export Tantalum and Niobium prodcut for more than ten years, Including foil tube , rod, wire, sheet, plate, rod, strip, target and so on We can supply the best quallity and low price. Tantalum sheets, Tantalum- tungsten alloy sheets(Ta2.5W, Ta10W)
:
:
| Thickness (mm) | Width (mm) | Length (mm | |
| Foil | 0.03-0.09 | 30-600 | 100 |
| Sheet | 0.1-0.5 | 30- 609.6 | 30-1000 |
| Board | 0.5-10 | 50-1000 | 50-2000 |
Stainless Steel :
ASTM / ASME SA 276 TP 304 , 304L , 309S , 309H, 310S , 316 , 316L , 316 TI , 317 , 321 , 347 , 410 , 420 , 430 , 431 , 440A , B & C. , 446 ASTM / ASME SA 479 TP 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 321 , 321H , 347 , 347 H , 410, 430 , 431 & 444.
Duplex Steel :ASTM / ASME SA 276 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Nickel Alloy
ASTM / ASME SB 160 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 )
ASTM / ASME SB 164 UNS 4400 (MONEL 400 )
ASTM / ASME SB 425 UNS 8825 (INCONEL 825) ASTM / ASME SB 166 UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 )
ASTM / ASME SB 446UNS 6625 (INCONEL 625)
ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 )
ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Featuers
Nitronic 50 Stainless Steel is an austenitic stainless steel with a blend of strength and corrosion resistance that is better than Stainless Steel 316, 316L, 317 and 317L. In fact, Nitronic 50 has about double the yield strength at room temperature compared to Stainless Steel 316/316L and 317/317L. Additionally, Nitronic 50 Stainless Steel has good mechanical properties at elevated and sub-zero. temperatures. Another characteristic of Nitronic 50 is that it does not become magnetic even when severely cold worked - unlike many other austenitic stainless steels. Another advantage of using Nitronic 50 Stainless Steel is its outstanding corrosion resistance in harsh environments, especially in marine application As noted previously, Nitronic 50 is much stronger than Stainless Steel 316/316L and 317/317L; however, the same fabrication equipment and procedures used for the Stainless Steel 300 grades can be utilized for Nitronic 50. In addition, the same cooling techniques used for Stainless Steel 316/316L and 317/317L can be utilized for Nitronic 50.
Grades Available:
XM-19 (UNS S20910)
Nitronic 50 Annealed
XM-19HS
Specification:
1.Grade :Gr1, Gr2, Gr4 , Gr5, Ti-6AL4V ELI, Gr.7, Gr.9, Gr.12
2.Standard :ASTM B348, ASTM F136, ASTM F67, AMS 4928
3.Size:Diameter : 4mm to 350mm, Length: 50mm to 6000mm
4.payment :T/T or L/C at sight
5.MOQ :10 kg
8.applications:industry, glasses so on.
| N | C | H | Fe | O | AI | V | Pa | Mo | Ni | Ti | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Gr 1 | 0.03 | 0.08 | 0.015 | 0.020 | 0.18 | Â | bal | ||||
| Gr 2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | bal | |||||
| Gr 3 | 0.05 | 0.08 | 0.015 | 0.30 | 0.35 | bal | |||||
| Gr 4 | 0.05 | 0.08 | 0.015 | 0.50 | 0.40 | bal | |||||
| Gr 5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.5~6.75 | 3.5~4.5 | bal | |||
| Gr 7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | 0.12~0.25 | bal | ||||
| Gr 9 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 2.5~3.5 | 2.0~3.0 | bal | |||
| Gr 12 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | 0.2~0.4 | 0.6~0.9 | bal |
| grade | Tensil strength(min) |
Yeild strength(min) |
Elongation(%) | ||
|---|---|---|---|---|---|
| ksi | MPa | ksi | MPa | ||
| 1 | 35 | 240 | 20 | 138 | 24 |
| 2 | 50 | 345 | 40 | 275 | 20 |
| 3 | 65 | 450 | 55 | 380 | 18 |
| 4 | 80 | 550 | 70 | 483 | 15 |
| 5 | 130 | 895 | 120 | 828 | 10 |
| 6 | 50 | 345 | 40 | 275 | 20 |
| 7 | 90 | 620 | 70 | 438 | 15 |
| 8 | 70 | 438 | 50 | 345 | 18 |
Purity:
>=99.95% or 99.99% Tantalum rod Tantalum alloy rod
Standard, ASTM B365-98
Dimension, Dia3100mm
Material, RO5200, RO5400, RO5252(Ta-2.5W)
Material:TaGrade:RO5200, RO5400, RO5252(Ta-2.5W), RO5255(Ta-10W)
| Diameter | Diameter Tolerance | Length | Tolerance | |||
|---|---|---|---|---|---|---|
| forging rod | Extruded Rods | rolling rod | ground rod | |||
| 3.0-4.5 | ±0.05 | ±0.05 | 500-1500 | + 5 | ||
| 4.5-6.5 | ±0.10 | ±0.10 | 500-1500 | + 5 | ||
| 6.5-10.0 | ±0.15 | ±0.15 | 400-1500 | + 5 | ||
| 10-16 | ±0.20 | ±0.20 | 300-1200 | + 5 | ||
| 16-18 | ±1.0 | ±0.30 | 200-2000 | + 20 | ||
| 18-25 | ±1.5 | ±1.0 | ±0.40 | 200-2000 | + 20 | |
| 25-40 | ±2.0 | ±1.5 | ±0.50 | 150-4000 | + 20 | |
| 40-50 | ±2.5 | ±2.0 | ±0.60 | 100-3000 | + 20 | |
| 50-65 | ±3.0 | ±2.0 | ±0.80 | 100-1500 | + 20 | |
We supply a wide range of Mild Steel Angles, which are available in various sizes and metal grades. These are manufactured by us using quality steel.
We have been offering a wide range of stainless steel angles in various forms, such as stainless steel flat bar, grade: 200, 300, series, SS hot rolled flat bar and SS cold drawn flat bar to our clients. These find applications in architectural applications, construction industries, multi-storied building, fastening industry, overhead cranes, fabrication and bridges.
20 mm x 20 mm x 3 mm Thk.
25 mm x 25 mm x 3 mm Thk.
25 mm x 25 mm x 5 mm Thk.
30 mm x 30 mm x 3 mm Thk.
100 mm x 100 mm x 12 mm Thk.
Durability
Easy to install
Rust free
Abrasion free
