Other Products / Services #2903142

Sectional Front View Of DC Motor.Sectional Front View Of DC Motor In accordance with the clear cut view of the working of DC motors, we present the Sectional Front View of DC Motors for our valuable clients. These motors are fitted with various types of components which lead to its functioning. Following are the components like carbon bushes, commutators, carbon holder, connection box on the body, rocker arm fitted inside for its functioning. Apart from these, some of the components like Bearings, End shield cover, Shaft, Field coil, Cooling fan, Main poles, Body frame, Armature winding and Rigid channel frame are the main sectional parts of DC motors for reliable performance. Our clients can easily have the sectional front view for the various requirements like in colleges for projects, seminars, customer view and others High quality components Durable Low maintenance

Static Type A.C To D.C Power Supply Panel.Static Type A.C To D.C Power Supply Panel ManufacturerFeatures:
It is designed for 3 ph A.C. input 350v to 460v with output of 220v D.C.Working under manual and auto modesCooper wounded transformer with stamping for the boost, buck and step down.To increase and decrease the output voltage the auto manual switches are fitted on front panelShort circuit and open circuit are protected by fuses and MCBVoltage and ammeter are fitted on front panelprotection from reverse supply due to reverse diode in the circuitTrolley with MS powder coating is in housed.

Inductive Load.Inductive Load ManufacturerFeatures:
It works on variation of air gap principle.Works on principle of air gap variation.High grade silicon used with stampingFitted in trolley with MS box coated with powderVoltage and ammeter are used to find the voltage and current at variable loadsCopper conductor connected with 3PH choke coil star.For the high insulation strength, wound coils are impregnated in vacuum pressure
Available Rating:
5A/10A/15A/20A for 1ph and 3ph types of Inductive load

Resistive Load.
Resistive Load Manufacturer
Under the able guidance of our experts, we manufacture Resistive Load devices using high quality raw materials ensuring the durability and non stop functionings. These devices develop an electrical load, and apply the load to the sources of electricity and converting the ensuing output of the source. The main work of the Resistive Load devices is to follow the operational load handled by the power sources.Features:
Fixed resistors with proper ratings having low temperature co-efficient wound on circular porcelain pipe.Rotary switches with fuses of proper grade used both in three phase and single phase types of load.It is air cooled device, housed in perforated MS Sheet (Trolley Type).Suitable for loading of DC Generators / Transformers/AC Alternators
Rating Available
10KW/7.5KW/3.75KW/5KW/7.5KW/2.5KW both in 3Phase and 1Phase

Capacitive Load.Capacitive Load ManufacturerFeatures:-
1 Phase capacitors load ISI marked of suitable raiting.Connected instar with safe discharging resistors.Variable steps with the help of rotary switches in steps of 1 amp approx.Housed in trolley typed M.S. Box with powder coated.Ammeter and voltmeter are used to study the current and voltage at different loads.
Rating available :
5A/10A/15A both is single and three phase

D.C. Motor.D.C. Motor Manufacturer
With the help of experienced personnel and advanced technology, we manufacture and supply durable and reliable quality D.C. Motors using high quality raw materials. These D.C. Motors are mainly used in various industrial applications as per requirements. Our wide ranges of these motors are appreciated for its unique features like high tensile strength, excellent finish, rust free and durable performance. These motors are available in various sizes, shapes and dimensions as per the requirements of clients.Features:
Permeability steel especially used to make yokeBearings in large size for trouble free and longer life operationsSuperior quality silicon used for armature stampingDurable quality fans are used for coolingFor the nonstop performance, copper conductors are made with high quality insulated materials.Field windings and armatures are impregnated with vacuum pressure for the best insulation strengthTo ensure the low noise, off center rotor construction is in dynamic balance.Uniform/constant pressure brush holdersLoading pulley as well as armature should be dynamically balancedTerminal box fixed with all terminals properlyStrong base frame in C.P. handle, heavy duty bolt and perfect spring of dial type helps in accurate reading of machines.DC motors are ISS 4722 confirmedAvailable ratings: 220V/380V/440V, 0.5H.P TO 10 H.P.Types of windings: Shunt/Series/Compound type.

Panel For Testing Of Buchloz Relay Setup.Panel For Testing Of Buchloz Relay Setup Manufacturer
Panel for Testing of Buchloz Relays are one of the most sold assortments of our electrical lab equipments. These relays are manufactured using high-quality raw materials as per international standards. These panels are used mostly to test the Buchloz Relays for the durable performance without any fault. The main function of these relays is to detect an abnormal condition in the tank itself only and to the alarm trip signal. Our clients can avail these panels in various sizes and grades as per their requirements at reasonable prices.Features:
Digital A.C. Ammeter and Digital A.C. Voltmeter.Relay with gas compressor availableInbuilt indicator of power on and trip indicatorGas Actuated Buchloz relay.Both protection circuit and control circuit are in built and duly wiredTo perform the experiments the necessary patch chords and terminals are required for the relay.

Transformer Oil Set.
Transformer Oil Set ManufacturerThis set up will consists of following facilities:
It can be operated Manual/ Motorized.Input 1 ph 220V and output 0-60KV/100/KV with set brakedown voltag.High voltage transformer manufactured with appoxy casted.Oil cup provided with go and no-go gauses.Built in control circuit and production circuit duly wired.Built in Power on Indicator trip status indicator.

Load Test On DC Shunt Motor Panel.
Load Test On DC Shunt Motor Panel ManufacturerFor D.C. Motors :-
we are making various types of experimental setup viz.
Features:-Load Test On DC Shunt Motor Panel
Speed troque Characteristics of D.C. motor (Shunt/series/Compound Type).Speed control of D.C Motor by Armature/Field Control method.To run a D.C. shunt Clockwise as well as Anticlockwise.Swinburns test D.C. Motor

Power Electronics Training System.Power Electronics Training System ManufacturerFeatured

The is the combination of power, electronics, and control. It has wide the applications of solid-state electronics to the control and conversion of electric power. Popular circuits of power electronics contain rectifiers, choppers and inverters. The experimental for modules includes converter, power supply, load, control and testing modules. These experimental modules and instruments will be introduced and demonstrated in the subsequent experiments.

Electrical Machine System.Electrical Machine System ManufacturerFeatured
Modular design provides flexible experimental requirementEach Module panel height compatible with DIN A4 standard Using 4 mm safety sockets and plugsEach DC/AC power supply equipped with overload protectionRotary machine and brake with overheating protectionAdopting digitized and microprocessor-based measuring instrument to provide high-accuracy measurementBrake with constant speed / constant torque function, easy to operateDrawing complete T/N curveConnecting to PC, measuring and drawing characteristic curve available300W-grade designed equipment suitable for learning the theory and characteristics of electrical machinesStand-alone machine design equipped with two shaft ends and aluminum alloy base for coupling to other machinesTraining panel uses 5 mm isolation bakelite, printed component symbol, value and function, easy to connectFully protected system safe to connect various kind of machinesProviding powerful computer measuring software for saving graphic.
Description
The electrical machines system leads students to distinguish the mechanical similarities and differences among all electrical machinaries. Students study and turn all kind of electrical machinaries into circuit models for the foundation. Moreover, it enhances students ability for furtherm employing and controlling. Besides facilitating teaching, it makes students be familiar with every kind of electrical mechanical test.

SCR Regulated D.C. Power Supply.SCR Regulated D.C. Power Supply

Power Electronic Training Boardhas been designed specifically for the study of continuously variable SCR Regulated Power Supply. The power supply can be manipulated to operate under different circuit conditions in order to provide insight into the important modes of SCR power supply operation. The output voltage can be varied from 10 to 40 Volts continuously. The power supply can also be used as astabilised source to feed external load up to 500mA. Internal loads are provided to test the performance in 16 steps. Practical experience on this board carries great educative value for Science and Engineering Students.

Object:

• Study of output voltage variation, regulation and ripple in open loop (without feed back) by varying the load using inductance input filter
• Same as above experiment by using capacitor input filter
• Study of output voltage variation, regulation and ripple in closed loop feed back by varying the load using inductance input filtershunt transistor pedestal control.
• Same as above experiment by using capacitor input filter-shunt transistor pedestal control
• Study of variation in output voltage for different slopes of linear resistance controlled ramp
• Study of line voltage variation (open loop) compensation
• Study of output voltage variation, regulation and ripple in closed loop feed back by varying load-series transistor controlled ramp in differential amplifier mode

Universal Motor Speed Control.Universal Motor Speed Control To perform the following experiments :

• Half wave controller without feed back
• Half wave controller with feed back
• Half wave controller high torque at low speed version skip cycling operation
• Full wave controller using triac and demonstrating hysteresis effects improved by gate slaving techniques

Study of SCR and A.C. Phase Control.Study of SCR and A.C. Phase Control

The offered range is ideally utilized to study A.C. Phase control circuits by using different triggering schemes. Being an essential component for power control, this range is applicable in different fields of science and engineering.

Features:

• An isolation transformer 230 VA.C. 250 mA. This protects external instruments from damage if they are not isolated
• Bridge rectifier for full-wave phase control with zener regulator
• Two potentiometers for resistance controlled ramps
• Two potentiometers for resistance controlled pedestals
• Uni-junction transistor 2N 2646
• Pulse transformer 1:1:1
• Three SCRs for half-wave and full-wave inverse parallel connections
• Adequate no. of other electronic components
• Mains ON/OFF switch, fuse and jewel light

Specifications:

• The unit is operative on 230V 10% at 50 Hz A.C. mains
• Adequate no. of patch cords stackable 4 mm spring loaded plug length meter
• Good quality, reliable terminal/sockets are provided at appropriate places on panel for connections/observation of waveforms
• Strongly supported by detailed operating instructions, giving details of object, theory, design procedures, report suggestions and book references
• Weight: 7 kg. (approx.)
• Dimension: W 412 x H 150 x D 310

Power Electronics Workshop.Power Electronics Workshop - Power Electronics Training System - The is the combination of power, electronics, and control. It has wide the applications of solid-state electronics to the control and conversion of electric power. Popular circuits of power electronics contain rectifiers, choppers and inverters. The experimental for modules includes converter, power supply, load, control and testing modules. These experimental modules and instruments will be introduced and demonstrated in the subsequent experiments.

The Power Electronics Training System consists of 28 experimental modules, a three-phase squirrel cage motor, load, control and measuring devices. It inculde single-phase rectifiers, three-phase rectifiers, DC choppers, inverters and application experiments.

Logic Trainer.Logic TrainerDescription
The logic trainer is designed for the logic beginners to enhance the comprehension of basic logical theory. The design is easy to operate and easy to understand. It is equipped with various kinds of basic logic gates, debounced logical switches, LED indicators, DC power supply with short circuit protection, pulse generator and solderless breadboard.

IC Tool.IC ToolDescription
IC PULLERIdeal for hobbyistAnti-staticSuitable for IC from 8-20 pinWeight: 25 g
STRAIGHTENERIdeal for breadboardAnti-staticSuitable for IC from 8 pin 20 pin and 24 48pinWeight: 25 gDIP IC EXTRACTORIt is special used for solderless breadboardWeight: 10g
PLCC EXTRACTORSuitable for 18pin 124pin PLCC usedWeight: 22 g

Advanced Digital Training System.

Opto Electronic Devices Characteristics.Opto Electronic Devices Characteristics Experimental Training Board has been designed specifically to study the characteristics of Opto Electronic Devices. Different experiments have been included in this Opto Electronic Devices characteristics board in order that a wide range of topics on Opto Electronics Devices Characteristics be covered in a short span of time. All the circuits for obtaining the characteristics of various devices can be easily assembled on this versatile training board itself. Practical experience on this board carries great educative value for Science and Engineering Students.Object:To study the characteristics of the following opto electronic devices :1. Light Emitting Diode (LED).2. Photo Diode.3. Photo Transistor.4. Light Dependent Resistor (L.D.R.).5. Photo Voltaic Cell.6. Optocoupler.Features:The board consists of the following built-in parts:1. Two 0-10V D.C. at 100mA, continuously variable regulated Power Supplies.2. D.C. Milli-ammeter, 65mm rectangular dial to read 0-10mA.3. . D.C Micro-ammeter, 65mm rectangular dial, with switch selectable ranges of 50mA, 500mA, 5mA and 50mA.4. D.C. Voltmeter, 65mm rectangular dial, with switch selectable ranges of 1V and 10V.5. Opto Electronic Devices:1 Light Emitting Diode (LED)2 Photo Diode3 Photo Transistor4 Light Dependent Resistance (LDR)5 Photo Voltaic Cell6 Opto Coupler

Wien Bridge.Wien Bridge

Measurement of Capacitance byWien Bridge

Semiconductor Diode Characteristics.Semiconductor Diode Characteristics

Experimental training boardhas been designed specifically for plotting Characteristics of Ge & Si Semiconductor Diodes. The board is absolutely self contained and requires no other apparatus. Practical experience on this board carries great educative value for Science and Engineering Students.

Object:

• To Study and Plot the Forward and Reverse Bias characteristics of (Ge & Si) Semiconductor Diodes.
• To Determine the Static and Dynamic resistances of Forward Biased p-n junction of the given Diodes.

Features:The board consists of following built-in parts:

1. 0-10V D.C. at 50mA, continuously variable with Coarse & Fine Pots, regulated Power Supply.
2. D.C. Voltmeter, 65mm rectangular dial, with switch selectable ranges of 1V and 10V.
3. D.C. Microammeter, 65mm rectangular dial, with switch selectable ranges of 50 mA and 10mA.
4. Ge and Si Semiconductor Diodes.
5. Adequate no. Of other electronic components.
6. Mains ON/OFF switch and Fuse

Anderson Bridge.Anderson Bridge

Experimental training boardhas been designed specifically for the measurement of inductance of acoil by Anderson Bridge. It includes audio amplifier with speaker for null detection (Instead of head phone) and one KHz sine wave oscillator instead of externally used decade audio frequency generator The board is absolutely self contained and requires no other apparatus.

Practical experience on these boards carries great educative value for Science and Engineering Students.

Object:

To measure the inductance of agiven Coil by Anderson Bridge method.

Features:

The board consists of the following built-in parts :

01. Anderson Bridge circuit with arms values

02. Potentiometer for varying one arm

03. Three different value inductances

04. Potentiometer with calibrated dial

05. Five capacitors selected by aband switch

06. Auio Amplifier with its IC regulated Power Supply

07. One KHz Sine Wave Oscillator with its IC regulated Power Supply

08. Speaker.

09. Mains ON/OFF switch, Fuse and Jewel light.

• The unit is operative on 230V 10% at 50Hz A.C. Mains
• Adequate no. of patch cords stackable from rear both ends 4/ 2mm spring loaded plug length metre.
• Good Quality, reliable terminal/sockets are provided at appropriate places on panel for connections/ observation of waveforms
• Strongly supported by detailed Operating Instructions, giving details of Object,
• Theory, Design procedures, Report Suggestions and Book References
• Weight :3Kg. (Approx.)
• Dimension :W340 xH110 xD210

System Of Horizontal Travel Lifting.

Coming from applications of lifting industry, this system associates the horizontal travel and lifting functions in order to transfer of a modular load, whose values are understood between 50 to 125 daN.Intended to be a part of the systems used in electrotechnics lab, this system has been designed to make wire by students different types of asynchronous motor starting as well as a logic control.It is built around an electrical hoist with a capacity of 125 kg associated with an electrical cabinet integrated to the whole. It answers the securities norms in force.

• Mono speed asynchronous motor starting.
• Bi-speed asynchronous motor starting.
• Variation of frequency of the asynchronous motor.
• Logic control of the brake in lifting mode, safety management.
• Control of measurable sizes of the installation: absence or presence of voltage (system able to be used for the electric security clearance).
• Commissioning and inspection of the good running after wiring realization.
• Maintenance and control of the system (thermal relay, control of the travels ends).

Structure:

• Mechanically welded Frame.
• Working area protected by a wire fencing.
• Access to the load by a door (with closing electric contact and key locking) located on the frame.

Lifting mechanism:

Bi-speed electric hoist with chain with nominal capacity of 125 kg, mounted with electromagnetic brake for lack of energy.

• Lifting motor: 850W, 400V three-phase, bi-speed.
• Horizontal travel motor: 400V three-phase, bi-speed.
• Lifting linear speed : 2 and 8 m/mn.
• Horizontal linear speed : 5 and 20 m/mn.
• 4 travel ends mechanics.

Horizontal axis: left and right

• Vertical axis: high and low.
• Load: 8 kg modular metallic masses with 11 additional elements of 10 kg, easily removable.

Control part:

• The electrical cabinet is full part of the system. It receives the bearing plate wired by the student.
• It consists of two distinct zones:

Cableman Area:

• Area receiving receives the bearing plate wired by the student.
• A fastener device and connectors allows a quick assembly of the bearing plate wired by the student.
• The buttons and indicators are fixed on the door and are connected to the bearing plate by a fast connector.

Power supply Area:

This second area concerns the power supply of the electrical cabinet. It is already wired and the student doesnt have an access to it.It includes:

• An alternative 24V power supply.
• A 3*400V+N+T power supply protected by a 30 mA differential circuit-breaker.
• One security logical building block.
• One security limit switch on the door that conditions the power sequencing of the bearing plate. This security can be inhibited permitting to make measurement exercises or electric authorization.
• The power sequencing buttons and lights.
• A main switch.
• An electric power supply by three phased normalized connector 3*400V+N+T 16A.

We propose, in option, several kits of components allowing the student to realize the wiring of this bearing plate , :

• Lot of material to wire version direct starting on the 2 axes.
• Lot of material to wire version speed driver.

All these components are available in cabled version on removable bearing plate

• Measurements: length: 2440 mm, width of the basis: 620 mm, height 1630 mm.
• Weight: 300 Kg.
• Electric power supplied : 3 x 400 V+T+N 16 A.

• Dimensions (L x w x h) out all: 320 x 650 x 1000 mm.
• Dimensions of the wiring zone: width: 600 mm, height: 800 mm

Industrial Heavy Door Portal.Industrial Heavy Door Portal ManufacturerOperating field
A heavy door is used in the steel industry, nuclear industry, aeronautics, offshore, banks, industrial hangars, tests laboratories, hydroelectric dams valves and military industry.Function
The heavy doors have safety environmental functions, for example:
Steel industries and foundries: thermal Protections.Hydroelectric dams: pondage and flow control.Nuclear industry: Protection against radioactivity.Industrial hangars: Protection against vandalism.Banks: Protection against hold up.
Main characteristics
Power And Industrial Mechanical Components.
Modular And Upgradeable Product.Change of motorization.Modification of the kinematic linkage.Change of the components. (couplings, bearings, gearwheels, guides and rails, etc.)
Different Safety Devices Technologies
Different Energies ; Electric, Hydraulics, pneumatic.Important Incremented Variation Of The Load.The mass of the door, or load, varying from 150 to 630 Kg, by increments of 20 Kg.
Teaching objectives
According to the chosen options, the PORTEL allows to develop the following objectives :Change of the coupling by a torque limiter.Change of the guide system (friction ; sliding).Change of the bearing.Change of the gearwheel.Change of the rack.Lubrication.Draining and filling of the reduction gear with oil.Showing the disturbances resulting from a bad mechanical adjusting .Butting.Stick-slip motion.Vibration.Temperature increase.Friction, sliding.Technological improvements.Comparison using Electric and Hydraulic energies.Change of the gear motor and the guide rail.Improvement of the electrical cabinet.Adjusting of the torque limiter.ON/OFF hydraulic technology.Proportional hydraulic technology
Features :
The sources of energy generally used to open and close these kind of doors are :
The Electric energy.The Hydraulic energy.
These kind of equipment are generally composed of :
A motorization.A transmission kinematic linkage.Safety devices.The training equipment PORTEL has been designed for teachers in maintenance, electrotechnology and safety fields and has the following characteristics.Robustness and industrial power.Modularity of the system.Flexibility for an efficient adaptation to the needs of training.Competitive price.
Technical specifications
Weight of the door (when empty) : 70 daN.Weight of the removable masses : 24 masses of 20 daN.Mini weight in movement: 70 daN, Maxi weight in movement: 550 daN.Power of the gear motor: 2, 2Kw.Opening speed of door.Max : 24m / min.Middle : 12m / min.Mini : 6m / min.1/ Main Module.The PORTEL has been designed in order to allow several upgradeable configurations from the main unit PORTEL.The main module PORTEL unit is made of two main dissociable units:
The power sub system
A control cabinet.A gear motor.A frame supporting the gear motor.
The operative part
A support frame, door post.A kinematic linkage.The heavy door.A protective enclosure equipped with two protective doors.A set of safety devices.
Control cabinet
It is an electric cabinet which allow to control the opening and the closing of the door in semi-automatic and automatic working; at variable speed; and to manage all the safety devices.It is equipped with an electric cabinet made of painted steel including :An PLC 12 input / 8 outputs ON/OFF power supply 230 V AC.A speed driver with integrated braking resistance.A disconnecting switch 4 poles 20A lockable mounted on the lateral face of the cabinet.A transformer 230 V / 24V AC 50 VA for the supply of the auxiliary circuits.A set of lights and safety devices with an emergency stop button.The connection terminals of the sensors and actuators.A potentiometer for the motor control.Two switches with 2 positions for the semi auto / auto modes and the up /down modes.
Motorisation :
Gear motor LEROY SOMER, equipped with a brake. Weight : 50 Kg.Power 2, 2 KW , 400V 3 phases + neutral .
A support frame :
Support frame, mechanically welded, squared section tube of 100 mm. It receives the heavy door, the two protective doors, the different linking plates. It is mounted on wheels and three support feet with adjustable screws.Kinematic linkage.Gear motor LEROY SOMER.
Coupling
Drive shaft, adjusted diameter 35 h7.2 squared flange bearing, with greasers.2 cylindrical pinions 18 teeth module 5.2 square racks in steel.Heavy door 650 x mm 1500 mm.Friction guide with band width 40 mm.4 masses of 20 daN each.
Heavy door :
The heavy door is a vertical sliding door. It is made of an aluminium plate of 25 mm thickness, 650 mm width, 1500 mm height, equipped with 12 pairs of axes to place the masses. Its empty weight is of about 70 daN. Its stroke is of 1000 mm.It is limited in the two way by 2 x 2 limit switches. The first switch allows to switch in reduced speed, the second switch allows the stop the movement of the door.It is equipped in basic version with 4 removable masses of 20 daN allowing to make vary the load. It is designed to receive a total of 24 masses, that allow to make vary the load from 70 daN to about 550 daN.It is equipped with the different machinings that allow it to receive the ball guides available in option.
Safety devices :
On the electrical cabinet : a set of fuses and safety relays.On the kinematic linkage : an electric brake on the motor, a torque limiter (in option) as well as a disk brake (in option).On the door : Safety by obstacle, inviolable door opening. Protective carter with sensor and fall-prevention device (in option).
2 Additional Modules To The Main Module Portel
The main module PORTEL has been designed to receive later on and without any modification the following additional modules.Balls guides module Ref MEA 110.Balls guides made of 4 skates and 2 rails.This module is provided with all the necessary accessories for its installation.
Torque limiter coupling
Torque limiter coupling module with a maximum torque of 500 Nm. It allows :
To limit and to adjust the torque to transmit.To absorb the jolts , the vibrations, the irregularities.To correct the vertical misalignments.The setting of the torque is possible from 10% to 100% of the nominal torque.Set of 4additional masses module Ref MEAS 130.Set of 4 steel masses equipped with fixing devices. Their weight is of 20 daN.The PORTEL can receive until 24 masses of which 4 are provided with the main module.
Extension of the transmission chain
This extension module allow to modify fully the power subsystem. In this configuration, the T-square supporting the gear motor is replaced by a mobile frame. It is assembled on the operative part subsystem, for and on behalf of the motorization frame of the main module PORTEL.
It is composed of :
A mechanically welded frame mounted on 4 wheels.A set of 2 double pinions with removable chain and hub.Chain with fast attachment.The gear motor (supplied with the main module PORTEL).A set of carters allowing to protect the student from the dangerous parts of the kinematic linkage.An angle transmission box with disengaging mechanism. This box allows to isolate the gear motor from the kinematic linkage.Two couplings allowing the links between.The angle transmission and the manual operation reduction gear.The angle transmission and the power gear motor.
Pneumatic disk brake module:
A disk brake with pneumatic control, with three types of brake pads allowing different tests.Manual control module:A reduction gear equipped with a hand wheel allowing to control the door manually. This removable system is made of conical pinions, roller bearings and a system of jaw clutching.
Hydraulic module:
A jack fixed at the centre of the frame crossbar of PORTEL thanks to journals allows through the help of a yoke fixed at the bottom of the door, the vertical displacement of this one.
The features of the hydraulic components are the followings :
Hydraulic jack: bore diameter : 40 mm, rode diameter :18 mm, stroke : 1000 mm.Hydraulic power station : Pressure: 70 bars, Flow: 3l/mn
This equipment allows a displacement of the door at a speed of 300 cm / min on a stroke of 1m.
Dimensions and weight
Door : 1500 X 650 X 25 mm.Main module PORTEL (overall dimensions) : L x W : 1260 X 1830 mm.High : Door opened : 3010 mm Door closed : 2200 mm.Weight of the main module without the removable masses : about 350 Kg.Weight of the main module with the removable masses : about 830 Kg.

Lifting System.Lifting System ManufacturerGeneral introduction:
This system permit to wire by the students different types of asynchronous motor starting.It must be manufactured around an electric hoist of 125 kg capacity with a containment cabinet integrated to the whole.
Frame :
Welded stainless steel.Protection of the working area by a safety grid.Access door to the load equipped with a security end stroke sensor and a lock key.
Teaching objectives
Mono speed asynchronous motor starting, Bi speed asynchronous motor starting, Frequency variation of the asynchronous motor, Logic control of the brake in lifting mode, Safety devices management, Installation sizes control, Presence or not of voltage (system capable to be used for the electric authorization), Installation and verification of the good working after wiring, Maintenance and setting of the system (thermal relay, adjustment of the end stroke sensors).
Technical specifications
Lifting Mechanism:
Electrical bi-speed hoist with chain, 125 kg capacity with brake.Bi-speed lifting Motor 200 W 400 V 3 phase.Linear speeds: 2 m/mn and 8 m/mn.Working end stroke: high and low.Out stroke: high and low (forcing by key button).Load constituted of a metallic mass of 15 kg and 11 modular elements of 10 kg.
Control part:
The containment cabinet is an integral part of the system and is able to receive the platen wired by the student . We propose in option different set of equipments:
1 wired platen including all the components for a direct starting1 wired platen including all the components with speed driver.The containment cabinet also include a differential circuit breaker, a end stroke security sensor on the door of the cabinet and one logic block security device that allows the electricity supply of the platen.A fast fixing device and connectors permit a fast installation of the platens wired by the students
General features:
Dimensions (L x w x h) (basis) : 1000 x 1000 x 2300 mm.Power supply 3 x 400 V+T+N. 16A.

Pallet Storage System.

The industrial PLC wich manages the process must take in account different informations relative to physical states as:

• The presence of a bag to the input of the system.
• The switch position.
• The presence of bags at the exit.
• The rank of the bag during the palleting process.

The system includes a switching functional chain of the bags a configuration and orientation functional subset of the bags ref and a module.

These three elements permit a progressive approach of the palleting process technology, and practical works oriented toward the knowledge of the sensors, pre actuators, actuators, effectors, the mechanical links and the initiation to automatics.

• A technical file including: The documentation of the components, the electric and pneumatics diagrams, the PLC program.
• A student file including the practical works.

Operative part

• Transfer by non end conveyor belt.
• Switching of bags by gearwheel-rack.
• Orientation of bags by air jacks.
• Configuration of the pallets by air jacks.
• Evacuation of the layer constituted by air jacks.

Pre actuators

• Contactors.
• Bistable distributors 5/2.
• Monostable distributors 5/2.
• Electro pneumatic Interfaces 3/2.

Actuators

• 2 reduction gears.
• 5 air jacks, double effect.

Sensors

• Photoelectric detectors.
• Inductive detectors.
• ILS detectors on jacks.

Control part

• PLC ScCHNEIDER
• Control desk.

• L x w x h = 1000 x 600 x 510mm,
• Mass: 68 kg.

Necessary energy

• Electricity: 220 V AC mono phase.
• Air compressed 6 bar.

Training features

• The system permits to visualize 5 operative tasks analyzed under a S.A.D.T form.
• The cycle is described by GRAFCET and GEMMA.
• The practical works permit to understand the various sequences of the program.

Teaching objectives

Mechanical engineering

• Transformation of the circular movement in rectilinear motion (motor-reduction gear-pulleys and belts). Automatics.
• The system permits the simulation of the GRAFCET and the exploitation of the GEMMA for the complete system.
• Switching Functional Chain Of The Bag (Functions with the module)

Teaching objectives

• Transformation of the circular movement inrectilinear motion (motor-reduction gear- gearwheel-rack).
• Measure of force, distance, time, displacement, electrical tension and current.
• Energy balance, notion of efficiency.

Automatics

• Connection of the pre actuator to the motor.
• Connection of the pre actuator to the PO.
• Simulation of the GRAFCET cycle.
• Dimensions: L x w x h = 500 x 360 x 230mm.
• Mass: 8 kg.

Teaching objectives

• Study of links: pivot, ball an socket joint, linear straight.
• Transformation of the straight linear movement in circular movement.

Automatics

• Connection of the air actuator.
• Connection of the pneumatic pre actuator to its

Control devise (switch button)

• Connection of the pneumatic pre actuator to the electro pneumatic interfaces.
• Connection of the electro pneumatic interfaces to the PLC.
• Simulation of the cycle relative to the studied module.
• Dimensions: L x w x h = 500 x 360 x 230mm

Surface Treatment Plant.Surface Treatment Plant Manufacturer
Teaching objectives
This system covers a wide range of themes which can be developed.
Management of the intense currents.Temperature control.Electrchemistry.Handling of pieces.Automatic.Study of a system with different technologies.Goods and people security.Maintenance of an automated system.
Technical specifications
A) Operative part:
It is composed of a mobile frame, including:
Chemical oil cleaning station.Rinsing station.Acid dipping station.Acid zinc plating station.Horizontal translation motor.Vertical translation motor.Jib crane.Retention tank.Filtering block.Electrical cabinet.Transparent safety guard of the working area.Ventilation hoodThe handling of the jib cranes in the 2 axes Y and Z (horizontal and vertical) is made with a speed of displacement of about 0, 2 m/s.Temperature control of the chemical oil cleaning bath by waves-train and static relays.The feeding of the electrolytic zinc plating bath is made by a current generator of 0-10 A with controlled direct current.Supply of the current generator from the single phase network.Display of tension and current.
B) Operative part:
An electrical cabinet integrating:
A compact PLC with analogical inputs/outputs and TOR, PID regulation, 2 interfaces of communication.A interactive exploitation dialog terminal with 2 display lines. 20 characters. communication with the PLC on the serial line, UNI-TELWAY protocol, 12 keys function keyboard.
10 service keys and 12 numerical keys.Programming made on several application pages and alarms pages.The power supply and people protection devices : differential circuit-breaker, contactors. fuses, transformer.Current generator for the electrolytic zinc plating bath.Technical Functions :
The PLC assures the following functions:
Management of 5 positions on the Y axis in order to ensure the operations of chemical oil cleaning, rinsing, acid dipping, rinsing and zinc coating.Management of 2 positions on axis (high and low).Temperature control of the chemical oil cleaning bath.Manual run.
Protection Of People And Environment :
Aspiration of steams above all the tanks.No waste to the sewage, the wasted baths will be reconditioned in delivery cans of and sent to approved centres for the treatment.The sounding environment is distinctly lower to 70db.People security by the transparent surrounding wall locked wit a key.Auto-control of the door sensor by a security box.
Essential requirements
Electric power supply : 3 x 380V + N + E. 16A.Sanitary water supply.Outside joining for draining of the noxiousness steams by 3m flexible hose.Inside Diameter 150 mm.
Dimensions and weight
Length 2, 4m width 0, 69 m.Height without the hood 1, 7 m.Height with the hood 2, 25 m.Weight 326 kg.Resonant level < 70 dB(A).

Load Test On 1 PH Transformer Panel.Load Test On 1 PH Transformer Panel Manufacturer
Features:
For Transformers, we are Making Various Types of Experimental Setup Viz.To study the polarity ratio test on transformer.To study various connection on 3ph transformer.To Study Open circuit and Short circuit test.To perform Scott connection on transformer.To perform load test on 1Phase / 3Phase Transformer.To perform parallel operation test on 1Phase / 3Phase Transformer TTo perform sumpner back to back test on 1ph transformer.

Industrial Refrigeration Unit.Industrial Refrigeration Unit ManufacturerIndustrial Refrigeration Unit
This bench is mounted on a steel frame with aluminum nuts, with 4 castors, 2 locking
The components are industrial and the bench is instrumented to monitor all parameters following the action of a technical component.Technical specifications
Hermetic compressor, 400 WForced air condenser with variable rate of flow2 refrigeration chambers with independent evaporatorsThermostatic regulation valves and pressure regulatorTemperature regulation with adjustable differentialExchanger for under-cooling of liquidData acquisition system for operational parameters consisting of: 1 floating flowmeter, 2 pressure gauges 0-15 and 0-35 barsTemperature sensors throughout the circuitWattmeter voltmeter ammeterCoolant recovery and refilling system consisting of: needle, liquid and moisture passage indicator, filter dehydrators.
Required services
230 V 50 Hz single phase
Dimensions and weight
180 x 80 x 180 cm 157 kg

Industrial Refrigeration Trainer.

Industrial Refrigeration Trainer consists ofthe following:

3 HP semi-hermetic compressorRefrigerant R-134A (other refrigerants available)Crankcase heater with automatic control systemOil circulating pumpTwo evaporators (forced-air type) with solenoids, timers, etc.Two water-cooled condensers (tube-in-tube and shell-in-tube)Gas bypass systemsCrankcase pressure regulator with gaugesOperating instructions, student experiment manual and teacher manualText: Modern Refrigeration and Air Conditioning with study guide and lab manual

Commercial Refrigeration Trainer.Commercial Refrigeration Trainer Manufacturer
Overall size: 100W x 27D x 74HElectrical requirements: Single phase, 220V AC, 60 Hz, 40A (115 VAC, 60 Hz for water tower)Utilities required are city water, drain to water, and means of venting water towerPlumbing to city water and water tower not includedWeight: 1300 lbs

Distillation Column Simulator.

Digital Automotive Air Conditioning Simulator.

Air Conditioning Unit.Air Conditioning Unit ManufacturerAir Conditioning UnitSpecification:
Air Conditioning teaching system, complete with initial heating stage, humidifier, chiller/dehumidifier and final heating stageTransparent duct (200mm x 200 mm) for complete visibility of the processComputer controlled via USB interface, with complete educational software including data logging, graph plotting with real time updates, mimic diagrams, data exportEducational software, replicating the psychrometric chart calculations4 sets of Temperature and Relative Humidity measurements at the various stages of the processRH sensors come with calibration values which can be entered into the software for best accuracyElectronic Flowmeter to measure the air flow in the ductDual control of boiler setting with a fast heat up setting and a gentle setting for control.
Description:
Air is drawn into the duct by a variable speed fan, and is passed through a flow straightener to the preheat heating elements. The air is then passed over a nozzle from a steam boiler, which allows the air to be humidified. The next component in the duct is the evaporator of the integral refrigeration unit. As the air passes through the evaporator it is cooled down. The evaporator housing also allows any water which condenses from the air to be collected in an external vessel. After the evaporator the air passes over the reheat elements and out through a louvered exit. Temperature and RH sensors are provided at the air inlet, after the preheat and humidifier, after the evaporator and after the reheat. The air flow is measured by an electronic sensor. The mains supply voltage is monitored in the equipment to allow calculation of effective heater powers. Underneath the duct are mounted the steam boiler for the humidifier, the compressor and condenser for the refrigeration system and the electronic control box

Chilled Water Refrigerating System Control Trainer.Chilled Water Refrigerating System Control Trainer ManufacturerChilled Water Refrigerating System Control TrainerFeatured
It is convenient for learning since the commonly-used control components of chilled water unit were placed on the panel layout.Three-phase motor is used in place of compressor. The learner can go forward their hands-on practicing step by step from basics like interlocking circuit, motor start-up and control circuit of forward / reverse rotation, to the advanced one such as the complete control circuit of reciprocating / screw type chilled water unit, etc.The used pressure component is triggered by direct vapor-pressurizing so the system can close to the real one. On the contrary, the traditional components used for teaching of the past that have to be actuated by bolt or screwdriver can be discarded.The input vapor-pressure, which is divided into 3 mimic pressures like low- pressure, high-pressure and oil pressure, can be used and adjusted separately so the learner would have clearer understanding of functionality of each component accordingly.The E.O.C.R is equipped

Ice Plant Trainer.Ice Plant Trainer Manufacturer
Coach is designed with easy and practical ideas to visualise the principle components of ICE PLANT. The overall set-up is housed in smartly-designed inflexible construction.Experiments:
To calculate ICE PLANT capabilityTo calculate COP
Utilities Required
Stabilized energy provide 15 Amp 220 V AC Water Provide & Drain

Buoyancy Balance.Buoyancy Balance Buoyancy Balance from Civil Mechanical Laboratory India Buoyancy Balance The unit is attached with a 15 kg capacity x 0.5 gm electronic balance. The frame is available with a suspension hook, Buoyancy Balance for Civil Engineering from Laboratory Equipment Manufacturers India - water tank, and lever for manually lifting the water tank

Los Angles Abrasion Testing Machine.
Los Angles Abrasion Testing Machine

Los Angles Abrasion Testing Machine from Civil Mechanical Laboratory India

Los Angles Abrasion Testing Machine Los Angeles Abrasion Testing Machine is used for determining the resistance of small size coarse aggregates and crushed rock. It consists of a hollow cylinder, mounted on a sturdy frame on ball bearings and with a detachable shelf which extends Los Angles Abrasion Testing Machine for Civil Engineering from Laboratory Equipment Manufacturers India - throughout the inside length of the drum catches the abrasive charge and does not allow it to fall on the cover. The drum of this machine is rotated at a sped of 30-33 rpm by an electric motor through a heavy-duty reduction gear. It is supplied completely with a tray for collection of the materials with revolution counter and abrasive charge

Sieve Shaker.
Sieve ShakerSieve Shaker from Civil Mechanical Laboratory India

• Shaking Frequency : 2500/Min, 42 Hz
• Shaking Method : Up And Down

Sieve Shaker for Civil Engineering from Laboratory Equipment Manufacturers India -

• Shaking Amplitude : 1.5 Mm
• Time Setting : 0 60 Min, Selectable
• Motor Power : 25 W
• Sieve Size : 200 X 50 Mm ( 9 Pieces )
• Frame Thickness : 0.5 Mm ( Double Layer )
• Power Supply : 220V AC, 50/60Hz, Single Phase

Los Angeles Abrasion Test Machine.
Los Angeles Abrasion Test MachineLos Angeles Abrasion Test Machine from Civil Mechanical Laboratory India

• The Los Angeles Abrasion Test Machine Is Used As Quality Control Tool For Aggregates, Including Crushed Rock, Gravel And Slag
• The Testing Method Determines The Degradation When Subjected To Abrasion, Attrition, Impact And Grinding
• Heavy Steel Cylinder And Base Frame
• Dust Proof Cover Plate

Los Angeles Abrasion Test Machine for Civil Engineering from Laboratory Equipment Manufacturers India -

• The Machine Comply With ASTM C131, EN1097-2, AASHTO T-96 International Standard

• Diameter Length : 710 X 510 Mm
• Drum Rotation Speed : 30 33 Rpm
• Counter : 5 Digits, Adjustable, Automatic Shut Off, Push Button Reset & Adjustment
• Steel Balls : 48 Mm
• Qty. Of Steel Balls : 12
• Steel Tray For Specimen Unloading
• Power Supply : 220V AC, 50/60Hz, Single Phase

Brick Cutter.
Brick CutterBrick Cutter from Civil Mechanical Laboratory India

• Rotation : 2500 3000 rpm
• Diamond blade : Diameter 300 400 mm, Thickness 2.5 3.5 mm
• Installment hole : Diameter 24 27 mm
• Cutting length : 550 650 mm
• Cutting depth : 75 85 mm

Brick Cutter for Civil Engineering from Laboratory Equipment Manufacturers India -

• Cutting width : 3 5 mm
• Power : 2 3 KW

Concrete Test Hammer.
Concrete Test Hammer

Concrete Test Hammer from Civil Mechanical Laboratory India

Concrete Test Hammer It consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar.

A plunger is attached to the guide bar which is pressed against the surface to be tested.

Concrete Test Hammer for Civil Engineering from Laboratory Equipment Manufacturers India - As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale.

A lock button fixed on the body of the hammer locks the rider in place and the rider can be recurred to zero position by using the same button.

The equivalent compressive strength can be computed from the chart supplied.

Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100 700 kg/cm.

Density Basket.
Density Basket

Density Basket from Civil Mechanical Laboratory India

Density Basket The Density basket is of 20cm dia x 20cm high fitted with galvanized wire mesh of 6.3mm with Density Basket for Civil Engineering from Laboratory Equipment Manufacturers India - handle for suspending it from the balance

Deval Abrasion Testing Machine.

Deval Abrasion Testing Machine from Civil Mechanical Laboratory India

Deval Abrasion Testing Machine For the determination of resistance of aggregate to wear by abrasion. Two hollow cylinders, closed at one end and provided with tightly fitting covers at the other end.Deval Abrasion Testing Machine for Civil Engineering from Laboratory Equipment Manufacturers India - The inside diameter of the cylinder 20 cms and 34 cms depth. The cylinders are mounted on a shaft at an angle of 30 with the axis of rotation. The shaft rotates at 30-33 rpm through a reduction gear, coupled to a motor. Suitable for operation on 440 volts, three phase, 50 cycles, AC supply. Supplied complete with a counter and push button starter. With 12 nos cast iron spheres or steel spheres (steel balls) hardened, approx. 48 mm in diameter, each weighing 380-445 gm

Sieve Shaker (Rotap).
Sieve Shaker (Rotap)Sieve Shaker (Rotap) from Civil Mechanical Laboratory India

This Shaker reproduces both circular and tapping motion, Produces Circular (280-320 RPM approx) and tapping (140-160 RPM approx) motion with Sieve Shaker (Rotap) for Civil Engineering from Laboratory Equipment Manufacturers India - a uniform mechanical action which ensures accurate and dependable test results. This shaker is heavy in construction and no special foundation is required. The running parts operate in oil. A 1/4 H.P. electric motor runs the machine, the machine can accommodate six test sieves + set of Lid-pan but is supplied without sieves.