Write a Review
Our Product / Services
We are leaders in the market for providing best range of Optical Splice Closure and Optical Joints Closure
Our company is one of the leading Optical Splice Closure Manufacturers, Exporters and Suppliers in the country. Designed and fabricated to meet stringent industrial requirements, our entire range of Optical Splice Closure is manufactured using the latest technologies and minds. Our Optical Splice Closure is of the best quality and available with us in different specifications.
Features:
Optical Splice Closure: NFP/OJC/001
|
Item |
NFP/OJC/001 |
|---|---|
|
Dimensions |
Length: 500mm |
|
- |
Inner Diameter: 200mm |
|
Weight |
2.70 kgs |
|
Inlet Port (Max.) |
4 Cable entry port |
|
Cable diameter (Max) |
18 mm |
|
Number of splice tray (Max.) |
4 |
|
Splice capacity per tray |
12 |
|
Splice Capacity |
48 |
|
Splicing Methos |
Fusion |
|
Splice Protector |
Splice Protection Sleeve |
Download
Optical Splice Closure: NFP/OJC/001
|
Test Description |
Test Condition |
|
|---|---|---|
|
Drop |
Condition : Height 2m into a 12 mm thick steel plate bolted on the concrete floor for 10 times |
No mechanical damages |
|
Gas Tightness |
Pressure : 1.5kg/sq. Cm for 24 hours |
No leak |
|
Water Ingress |
Immersion in water to a depth of 6.10 m for 7 days |
No water instrusion |
|
Residual Loss |
Insersion loss before and after looping of optical fibers is measured. Wavelength : 1310nm and 1550nm |
No greater than 0.05 dB |
|
Cable Clamping |
Insertion loss before and after clamping of the cable is measured. Wavelength : 1310nm and 1550nm |
No greater than 0.05 dB |
|
Torsion |
Pressure : 0.5 kg/sq cm, Twist inlet cable 90° turn to clockwise for 5 minutes, then repeated in opposite direction. |
No leak No mechanical damage |
|
Flexure |
Pressure : 0.5 kg/sq cm, Condition: Max 500N Ddflect cables: 30° hold for 5 minutes and the other direction |
No leak No mechanical damages |
|
Axial Tension |
Pressure : 1.5 kg/sq.cm Condtion : 50kg longitudinally for 30 minutes |
No leak No machanical damage |
|
Impact |
Pressure : 0.5 kg/sqcom Impact : Drop into the closure from 500mm, Impact level : 5kg , O 50 mm |
No leak No mechanical damages |
|
Static Load |
Pressure : 0.5 kg/sq.cm Load : 250 kg on the upper plate for 24 hour |
No leak No machanical damages |
|
Termal Aging |
Condition : In air oven perpendicular to air flow to 90° C for 720 hours. |
No mechanical damges |
|
Environmental cycle |
Pressure : 0.5kg/sq.cm, Temp:-20~60°C Humidity : 95% @ 60°C, 20 Cycles (1cycles is 10 and ½ hours) |
No leak |
|
Salt Spray |
Condition : Salt mist test as per QM-333 |
No corrosion No mechanical damages |
|
Vibration |
Measurement : assembled with fiber splicing Vibrate : 2 hrs in x-y-z axis each with Frequency |
No greater than 0.1dB |
|
Aggressive media |
Pressure : 0.5 kg/sq.cm Condition : Solution pH2, Kerosene, Petroleum Jelly and Fuel oil for 5 days each |
No leak No mechanical damages |
|
UV |
Condition : In the UV rays for 2000 hours |
No mechanical damage |
|
Current Surge |
Condition : Current surge of 1000 Amps for 5 seconds |
No mechanical damages |
optical cable joint closure's shell is employed high-intensity engineering plastic and added aging agent resist to inject moulding. Inner metalworks are made of high grade steel material forming by punched and oxidizing treatment. Outside metalworks are made of stainless steel material witch with corrosion resistant. It is suitable for pipeline and overhead and vertical installation etc
Dilip Navalakha Preeti (Navalakha Group)
619, Sadashiv Peth, Sadashivpeth, Pune, Maharashtra - 411030, India
Share us via
