Our Products
We offer a complete product range of Biochemistry Analyser
Technical Specifications
| General Specification | |
| Linear Measurement Rnage | 0.000 to 3.000 Absorbance Units (A |
| photometric Accuracy | 2% or 0.007 Whichever is higher, From 0 to 1.5 A 3% From 1.5 to 3.0A |
| Drift | <0.007A/hr |
| photometric Linearity | 2.2A |
| Optical Measurement | Photodiode |
| Filters | |
| Type of filter | Interference |
| Wave Length | 340, 405, 510, 546, 578, and 630 nm & Two optimal |
| Half bandwidth | 10 nm 2 nm |
| Filter selection | Automatic by stepper Motor |
| Flow cell | |
| sipping volume | 1000/500/250 l |
| Flow Cell Volume | 18 l |
| Sipping Mode | Automatic by specially Designed Peristaltic pump |
| Cuvette Volume | 500l |
| Temperature of Cuvette/ Flow Cell Block | |
| Meathod | By Peltier Effect |
| Temperature | 25, 30, 37oC |
| Dry Block Incubator | |
| Number of Cuvettes | 12 Cuvettes |
| Temperature | 37oC |
| Light Source | Xenon Glass Filled / Tungsten Halogen |
| Warm Up Time | 90 sec |
| Display | Four line LCD, Back Lit, 4 x 20 Characters |
| Printer | built in thermal printer |
| Memory | 32kb Non Volatile RAM With Battery Back Up For 100 Open Tests, With 10QC Results / Test |
| Analysis Mode | Aborbance, Kinetic, End point, Differential, Multi- Standard, Ratio, Fixed Time, PTT. |
| Concentration Calculation | By Factor Or By Standard |
| RS232 Serial Port | 2400 Baud, 1 Start, 8 Data, 1 stop, No parity Bits |
| Power | |
| Wattage | 50 Watts |
| Voltage | 115- 230 Volts10%, 60-50 Hz |
| Operating position | On Horizontal, Flat, Rigid and Vibration Free Surface |
| Operating Conditions | |
| Temperature | From 18 to 35oC |
| Relative Humidity | Upto 85% |
| Storage Condition | |
| Temperature | From -10oC To 60oC |
| Relative Humidity | Upto 85% |
| Enclosure | ABS Fire Retardent |
| Size | 30 x 38 x 13.5 (LXBXH) |
| Weight | 5 kg |