Navyug Udyog

Ambala Cantt, Ambala, Haryana

Casted stainless Steel vessel is electrically operated for getting pyrogen-free distilled water automatically. Wall hanging space saving arrangement is provided. The condenser is seamless. Fitted with automatically ejection device which operates automatically when water vessel gets dried. The baffle cup and condenser are made of stainless steel sheet.

We are offering hot plate, nu-131 hot plates laboratory hot plates are available in round and rectangular shapes. Body is fabricated out of thick mild steel sheet duly finished in stoving enamel paint. The hot plate made of cast iron, nicely & precisely machined & smoothed duly finished in heat resistant black paint is firmly mounted on the body. Heavy duty heating elements are securely layed under the plate to operate on 220 v ac 50 hz single phase. temp. Is controlled by a three-heat rotary switch along with an indicator lamp for the mains and cord & plug. a) hot plate : (round) single specifications as above with 20 cm.(8”) dia. Moulded top. b) hot plate (round) double as above but with two plates of 20 cm (8”) dia. Having independent pilot lamps & switches

We are offering mortuary chamberl nu-152 mortuary chamber designed to store cadaverous under cool conditions to prevent decomposition. Double walled construction, outer made out of thick mild steelsheet duly finished in stoving enamel paint and inner made out of stainless steel sheet. The gap between the two is filled with glass wool for temperature insulation. front opening covered with double walled door with magnetic gasket, lock & key and handle. Individual chambers are provided with independent locks with duplicate keys. Trays to carry dead bodies are provided with handles on both ends travel on rollers fitted on ball bearings for smooth movements. The refrigeration unit is fitted on the rear top. Temperature of +2^oc to 4^oc is maintained by hermetically sealed compressor unit and is controlled by an automatic electronic digital temp. Controller-cum-indicator. Panel is provided with indicators & controllers etc. Completed with cord & plug. the unit is to work on 220v ac 50 hz single phase.

Capacity Temp. Voltage Stabilizer

• Single body 2^o to 5^oc. 3kva
• Two bodies 2^o to 5^oc 4kva
• Three bodies 2^o to 5^oc 5kva
• Four bodies 2^o to 5^oc 8kva
• Six bodies 2^o to 5^oc 8kva

Outer shell made out of thick mild steel duly finished in attractive stoving enamel paint. Fitted with grooved refractory for supporting the heating elements made out of kanthal wire and are easily replaceable. Maximum temp. 1000^oC with working temp. 940^oC controlled by Subsonic energy regulator.

Body made out of thick mild steel sheet finished in stoving enamel paint heavy-duty motors of suitable capacities are provided for long time, continuous operation. Fixed speed and variable speed models are offered. Platform provided with rubber discs or wire partitions to hold flasks. To work on 220V AC to 50Hz single phase.

Body in made of one-piece aluminium and is logged with special mineral wool. The panel is provided with on-off switch, energy control knob, pilot lamp etc. Provided with jointless hand knitted heating nets of glass yarn capable of withstanding high temperature upto 400^oC. Single supplied complete with cord & plug to work on 220 V AC 50 Hz single phase. Single circuit system has been adopted.

Developed as per standard guidelines provided by Central Pollution Control Board. Complete with basic equipment and standard chimney.

Models Electrical

• Cap. 3-5 kg.
• Cap. 8-10 kg.
• Cap. 12-15 kg.
• Cap. 18-20 kg.

Motor driven, oil sealed pump mounted on heavy base. It is driven by V belt at speed upto 400 RPM. Choice of single and double stage available creating Ultimate vacuum of 0.01 mm of Hg column and .0 mm of Hg column respectively. The pump is to work on 220V AC 50 Hz single phase.

Compact stirring device utilizing a rotating magnetic field applied from below the container. The stirring is accomplished by a teflon rotor placed in the liquid to be stirred. Complete with pilot lamp, plug cord, continuously variable speed regulator The body is made of mild steel duly finished in stoving enamel and mounted with a stainless steel top which serves as a hot plate. Stirring and heating units are properly insulated. In model with heating system temp. is controlled by an energy regulator. An electronic speed controller is also provided. The equipment works on 220V AC 50 HZ single phase.

Designed for shaking khan racks, bottles, and flasks of different sizes by adjusting compartments. Fitted with heavy duty motor to work on 220 V AC 50 Hz V A single phase. The rate of motion is Adjustable mechanically by belt tension. Speed is fixed in same models to approximately 275 or variable as detailed below.

Double walled construction. Inner round chamber made out of stain- less steel sheet. Exterior made out of mild steel duly finished in stoving enamel white paint. Gap between the two filled with glass wool for temp. Insulation. Temp. range 50^oC to 150^oC + 3^oC. The body capable of withstanding vacuum of 760mm hg. Complete with temp. regulator, indicator lamp, on-off switch, cord plug etc. Workable on 220 V AC 50 Hz single phase. Supplied without vacuum pump.

Suitable for VDRL and other agglutination tests, blood grouping tests and for mixing of solutions in small flasks, beakers or bottles. Body made of sturdy mild steel sheet duly finished in stoving enamel paint. Tray type platform size 300x300 mm can take cavity slides, bottles, flasks etc.for shaking at a fixed speed, by the help of spring wires. Standard fixed speed 180 RPM An automatic 60 minutes timer can be provided against extra cost as optional by which shaking duration can be set. To work on 220V AC 50 Hz single phase.