There are four types of kjeldhal1. Kjeldhal units (without glass part)i)Kjeldhal Digestion unit unit of 3 test Heater type 4600.00unit of 6 test Heater type 5700.00unit of 3 test mantel type 4600.00unit of 6 test mantle type 5800.00 II) Kjeldhal Distillation UnitsIII) Kjeldhal Digestion & Distillation Unit (Combined)IV) COD Digestion with Digital Temp. Controller + Digital Timer OPTIONAL:1. Fume duct made of PVC.3 unit 800.00 2. Fume duct made of PVC.6 unit 1500.003. Sunvic Energy regulator 400.004.Glass part for 3 test 1200.005.Glass part for 6 test 2400.00

Range : 340 to 960Resolution: 0.1%T, Abs .0001, Conc.1Output : %T:0to 100% Abs: 0to1.99, Conc: 0to 1999Detecor: Sillicon PhotodiodeLight Source: Tungsten halogen lampGratings : High Performance holographic grating systemSample holder: 10 mm path length, 10&50mm path lengthSpecial brand width: 5nmWavelength Resolution: 1nmWavelength Accuracy : +_2.5 nmRepeatability : +_2 nmDisplay :3 1/2 digit , 3 digit (Wavelength) LED displayPower supply : 230V , 10%AC , 50 HZ Glass part is available & Charges are extra.

We have the speciality in the manufacturing of high vacuum pumps, The material and technology used in such pumps is latest and gives high performance in all types of laboratory use with special high quality motor for hours of service, properly coupled withand on base, Capacity Single stage , Double stage 32 lt/mm. 15000.00 21600.0050 lt/mm 18000.00 26400.00There are many capacitiesOPTIONAL:-1.Vacuum Gauge with regulator 2000.002. Moisture Trap. 2500.003.Non return value 1/2" 1300.004.Non return value 1" 1700.005. Air blast. 1000.00 There are many vacuum pump is OIL FREE.15 liter 9000.0025 liter 12000.0045 liter 17000.0075 liter 20000.00

WATER BATH INCUBATOR SHAKER (Metabolic Shaking Incubator) Useful for studies on tissue metabolism, enzymes and protein coagulation and other experiments demanding shaking at constant speed under controlled temperature conditions. Double walled construction, inner chamber made out of thick highly polished stainless steel sheet and outer made out of thick mild steelduly finished in stoving enamel paint. The lid is made of stainless steel. The gap between the two chambers filled with glass wool to prevent loss of heat. The temperature is achieved by superior immersion heater and is controlled by capillary type thermostat from ambient to 90oC+ 0.5oC.The shaking mechanism is fitted with variable speed motor couple to shaking tray working on rollers.

PH/MV METER DIGITAL MICROPROCESSOR BASED (SOFT TOUCH KEYS)With 4 digit LED display , MTC (Manual Temp.Comp.), 3 points (4.00, 7.00 & 9.20) Auto Buffer recognition, 3points (4.00, 7.00 & 9.20) ph calibration (Auto & Manual). Along with complete accessories (i.e. ph electrode combined , temp.probe, electrode stand, buffer sol, Dust cover & Manual). THERE ARE MANY TYPES OF PH METERS.

Body made out of thick mild steel sheet finished in stoving enamel paint heavy-duty motors of suitable capacities are provided for long time, continuous operation. Fixed speed and variable speed models are offered. Platform provided with rubber discs or wire partitions to hold flasks. To work on 220V AC to 50 Hz single phase.

We are offering hot plate, nu-131 hot plates laboratory hot plates are available in round and rectangular shapes. Body is fabricated out of thick mild steel sheet duly finished in stoving enamel paint. The hot plate made of cast iron, nicely & precisely machined & smoothed duly finished in heat resistant black paint is firmly mounted on the body. Heavy duty heating elements are securely layed under the plate to operate on 220 v ac 50 hz single phase. temp. Is controlled by a three-heat rotary switch along with an indicator lamp for the mains and cord & plug. a) hot plate : (round) single specifications as above with 20 cm.(8”) dia. Moulded top. b) hot plate (round) double as above but with two plates of 20 cm (8”) dia. Having independent pilot lamps & switches

Designed to store cadaverous under cool conditions to prevent decomposition. Double walled construction, outer made out of thick mild steelsheet duly finished in stoving enamel paint and inner made out of stainless steel sheet. The gap between the two is filled with glass wool for temperature insulation. Front opening covered with double walled door with magnetic gasket, lock & key and handle. Individual chambers are provided with independent locks with duplicate keys. Trays to carry dead bodies are provided with handles on both ends travel on rollers fitted on ball bearings for smooth movements. The refrigeration unit is fitted on the rear top. Temperature of +2oC to 4oC is maintained by hermatically sealed compressor unit and is controlled by an automatic electronic digital temp. controller-cum-indicator. Panel is provided with indicators & controllers etc. Completed with cord & plug. The unit is to work on 220V AC 50 Hz single phase.

We are offering mortuary chamberl nu-152 mortuary chamber designed to store cadaverous under cool conditions to prevent decomposition. Double walled construction, outer made out of thick mild steelsheet duly finished in stoving enamel paint and inner made out of stainless steel sheet. The gap between the two is filled with glass wool for temperature insulation. front opening covered with double walled door with magnetic gasket, lock & key and handle. Individual chambers are provided with independent locks with duplicate keys. Trays to carry dead bodies are provided with handles on both ends travel on rollers fitted on ball bearings for smooth movements. The refrigeration unit is fitted on the rear top. Temperature of +2^oc to 4^oc is maintained by hermetically sealed compressor unit and is controlled by an automatic electronic digital temp. Controller-cum-indicator. Panel is provided with indicators & controllers etc. Completed with cord & plug. the unit is to work on 220v ac 50 hz single phase.

 

Capacity Temp. Voltage Stabilizer

• Single body 2^o to 5^oc. 3kva
• Two bodies 2^o to 5^oc 4kva
• Three bodies 2^o to 5^oc 5kva
• Four bodies 2^o to 5^oc 8kva
• Six bodies 2^o to 5^oc 8kva

Double walled and double door. Temperature controlled by thermostat with dial type thermometer , Forced air blower.Chamber Size Tray Inner S.S. Inner M.S430x840x650 8 Tray 46200.00 42000.00430x840x910 12 Tray 56600.00 50400.00910"x840x910 24 Tray 81800.00 68000.00 There are Many Sizes OPTIONAL:1. TImer0-24 hours. 2800.002. Digital Temp. Indicator cum controller 6600.003. Tray 16"x32"x1/4" Size AL 800.004. Tray 16"x32"x1/4" Size SS 1500.00

Conductivity meter digital :dual display LCD & LED microprocessor based (soft touch keys) 4 digit LED & 16x12 line alphanumeric LCD display. THERE ARE MANY TYPES OF CONDUCTIVITY.

Body in made of one-piece aluminium and is logged with special mineral wool. The panel is provided with on-off switch, energy control knob, pilot lamp etc. Provided with jointless hand knitted heating nets of glass yarn capable of withstanding high temperature upto 400^oC. Single supplied complete with cord & plug to work on 220 V AC 50 Hz single phase. Single circuit system has been adopted.

Laminar flow principle involves double filteration of air through coarse pre- filters (upto 5 microns) and Hepa filter (down to 0.3 microns) for filteration of biological and particulate contaminants. A constant uni-directional air flow is drawn from atmosphere and passed through pre and hepa filters on the work surface. Fabricated out of reinforced ply board which is clad in from out side laminated sheet and inner exposed areas are finished in epoxy paint. Table top covered with non-glaring laminated sheet or stainless steel sheet (optional). Side panels are fixed and are made out transparent acrylic sheet. The front door is folding type and made of thick acrylic sheet. (optional) Stand is built in type or detachable. Blower unit has AU or equilavent motor and is dynamically balanced with minimal sound & vibration level. Fluorescent lighting is also provided. A suitable UV tube is provided for sterilization. An acrylic block type manometer to measure static pressure in the chamber has been inustalled.Two way gas tap for gas line has also been provided

Motor driven, oil sealed pump mounted on heavy base. It is driven by V belt at speed upto 400 RPM. Choice of single and double stage available creating Ultimate vacuum of 0.01 mm of Hg column and .0 mm of Hg column respectively. The pump is to work on 220V AC 50 Hz single phase.

Developed as per standard guidelines provided by Central Pollution Control Board. Complete with basic equipment and standard chimney.

 

Models Electrical

• Cap. 3-5 kg.
• Cap. 8-10 kg.
• Cap. 12-15 kg.
• Cap. 18-20 kg.

Suitable for VDRL and other agglutination tests, blood grouping tests and for mixing of solutions in small flasks, beakers or bottles. Body made of sturdy mild steel sheet duly finished in stoving enamel paint. Tray type platform size 300x300 mm can take cavity slides, bottles, flasks etc.for shaking at a fixed speed, by the help of spring wires. Standard fixed speed 180 RPM An automatic 60 minutes timer can be provided against extra cost as optional by which shaking duration can be set. To work on 220V AC 50 Hz single phase.

It constitutes of a washing cylinder made of stainless steel sheet highly polished measuring 63 cm. In height and 15 cm. In diameter and is mounted on a base of 26 cm. diameter. it is provided with a removable pipette holder. It can accommodate pipette of 37.5cm length. It works on the siphoning principle.

Vacuum Pump Oil Free, Vacuum Pump (Oil Free) Capacity Motor 15 Liter 116 hp 25 Liter 18 hp 45 Liter 14 hp.

A versatile equipment to heat slides with just microtomed sections to attain maximum flatness before Staining. Temperature range ambient temperature is thermostatically controlled. The body is made out of thick mild steel duly finished in stoving enamel and top is made of highly polished copper or stainless steel sheet. Complete with thermostatic control knob, indicator lamp, plug & cord etc. to work on 220 V AC 50 Hz single phase.

Casted stainless Steel vessel is electrically operated for getting pyrogen-free distilled water automatically. Wall hanging space saving arrangement is provided. The condenser is seamless. Fitted with automatically ejection device which operates automatically when water vessel gets dried. The baffle cup and condenser are made of stainless steel sheet.

Pipette Washer Automatic It constitutes of a washing cylinder made of stainless steel sheet highly polished measuring 63 cm. In height and 15 cm. In diameter and is mounted on a base of 26 cm. diameter. it is provided with a removable pipette holder. It can accommodate pipette of 37.5cm length. It works on the siphoning principle.

Kjeldhal Digestion & Distillation Units Combined one above the other. A fume duct holder and a heating box are supplied for digestion unit. The heating units have individual on-off switches. In upper portion another heating unit with a condenser rack is provided. The unit is workable on 220 V AC 50 Hz. Single phase. Complete with cord & plug etc.

INCUBATOR BACTERIOLOGICAL Memmert type Inner chamber made out of richly anodized aluminium or highly polished stainless steel sheet and outer made out of thick mild steel sheet finished in white stoving enamel paint or mat finished pastle colour combinations. The gap is filled with special glass wool for temp. insulation. Double wall door with double window for observation in the chamber. Temperature range 5oC above ambient to 80oC + 2oC controlled by a thermostat. L- shaped thermometer is provided for taking temp. readings.

Melting Point App.Microprocessor Controlled The unit consists of a built in magnetic stirrer, glare free background illuminator and cylindrical silicon oil bath. The silicon oil bath consists of a plain cylindrical container of corning glass having capacity of about 200 ml. It is furnished with a Ptfe cover fitted with special type of oil immersion heater, having three small holes for holding the capillaries, one big hole for thermometer and another big hole for boiling point tube Temp. Sensors for calibration purposes. A variable speed stirrer is fitted in it. The apparatus can be used for determination of boiling points, Temp. effect on viscosity flow points and molecular weights by Rasts method with suitable accessories.

Refrigeration Liquid Bath-Cooling Bath Standard double walled construction. Inner chamber made out of 5oCto 90oC and controlled by a sensitive Mercury contact thermometer with an accuracy of + 2oC. Fitted with a stirrer and speed regulator.

Rectangular Muffle Furnace Laboratory Model Outer shell made out of thick mild steel duly finished in attractive stoving enamel paint. Fitted with grooved refractory for supporting the heating elements made out of kanthal wire and are easily replaceable. Maximum temp. 1000oC with working temp. 940oC controlled by SUNVIC energy regulator.

Incubators Bacteriological Inner chamber made out of richly anodized aluminium or highly polished stainless steel sheet and outer made out of thick mild steel sheet finished in white stoving enamel paint or mat finished pastle colour combinations.The gap is filled with special glass wool for temp. insulation. Double wall door with double window for observation in the chamber. Temperature range 5oC above ambient to 80oC + 2oC controlled by a thermostat. L- shaped thermometer is provided for taking temp. readings. Panel is provided with pilot lamps for mains & heaters, On-off switch, temp. Control knob etc. The equipment is workable on 220 V AC 50 Hz single pahse. Heating is achieved from 3 sides. Perforated removable shelves also provided

Melting Point Apparatus Automatic Microprocessor of a miniature furnace with Auto controlled heating rate arrangement, an air circulating arrangement and a digital temp. Indicating circuitry with necessary controls, Temperature at the melting point is latched on the digital display and the furnace is automatically cut-off. The instrument gives audio & visual indications, on reaching the temperature at which the sample melts. The temperature indicating point of the sample remains displayed on the panel till the switch is RESET is operated. Not Suitable for Dark Colored Samples. Opto-coupled light transmission based, Sample required to be transparent at the time of melting. Suitable for Melting Point, Recommended for Melting Range 350C, Readability C, Resolution 1C, Programmable, Automatic ramp Rate Proceeding, Auto Gradient Rate of Heating Control, Sample Capacity 1 Sample, With Cooling arrangement of Furnace,

Dispensing Sampling Booth Our vast industrial experience has enabled us to manufacture and supply a quality range of Dispensing Sampling Booth. These booths are used in medical and forensic laboratories for providing a protecting environment for the workers. To manufacture these booths we use optimum quality materials, sourced from the most reliable and trusted vendors of the market. We can make the Dispensing Sampling Booth available for the clients in different customized specifications as per requirements.

Deep Freezer vertical Upright a quality grade Deep Freezer Vertical Upright. These equipments are used for quick freezing and storing of vaccines, biological & medical specimens & blood samples. To manufacture the equipments, we use finest quality materials sourced from the most reliable vendors. The clients can avail our Deep Freezer Vertical Upright in different customized models and specifications as per requirements.

Rotary Shaker VDRL Rotator Carrier size 13"x13" fitted with geared motor with concentric motion along with time switch range 0 to 15 minutes. Operated on 220230 Volts.

Water Bath Paraffin WATER BATH PARAFFIN Thermostatically controlled. Double walled with cups and shelves for glass tubes. Temp. upto 95C with an accuracy of + 0.5oC to + 1oC. Stainless Steel. A. 4 Cups & 6 Sleeves . B. 6 Cups & 8 Sleeves. C 12 Cups & 14 Sleeves

Oil Bath (High Temp.) with Stirrer Inner chamber made of highly polished stainless steel or copper sheet and outer made of mild steel duly finished in stoving enamel. Temperature range 50oC to 250oC + 2oC is controlled by a thermostat. Supplied complete with stirrer, diffuser shelves, cover etc. panel provided with on-off switch, pilot lamps thermostatic control knob etc.

Laminar Air Flow Horizontal of air through coarse pre- filters (upto 5 microns) and Hepa filter (down to 0.3 microns) for filteration of biological and particulate contaminants. A constant uni-directional air flow is drawn from atmosphere and passed through pre and hepa filters on the work surface. Fabricated out of reinforced ply board which is clad in from out side laminated sheet and inner exposed areas are finished in epoxy paint. Table top covered with non-glaring laminated sheet or stainless steel sheet (optional). Side panels are fixed and are made out transparent acrylic sheet. The front door is folding type and made of thick acrylic sheet. (optional) Stand is built in type or detachable. Blower unit has AU or equilavent motor and is dynamically balanced with minimal sound & vibration level. Fluorescent lighting is also provided. A suitable UV tube is provided for sterilization. An acrylic block type manometer to measure static pressure in the chamber has been inustalled.Two way gas tap for gas line has also been provided

Drying Oven Industrial Double walled and double door. Temperature con trolled by thermostat with dial type thermometer. Forced air blower.

Kjeldhal Distillation Units Asbestos tops mounted on mild steel tubular stand. Provided with condenser clamps and water manifold. Unit of 3 tests (Heater type).

Water Still Table Model Double wall construction having both made out of highly polished stainless steel sheet. The gap between the two is filled with glass wool for heat insulation. It is easy to handle table model working on 220 V AC 50 Hz single phase.

Hot Plate Rectangular are available in round and rectangular shapes. Body is fabricated out of thick mild steel sheet duly finished in stoving enamel paint. The hot plate made of cast iron, nicely & Precisely machined & smoothed duly finished in heat resistant black paint is firmly mounted on the body. Heavy duty heating elements are securely layed under the plate to operate on 220 V AC 50 Hz single phase. Temp. is controlled by a three-heat rotary switch along with an indicator lamp for the mains and cord & plug.

Reciprocating Shaking Machine Khan Rack Type for shaking khan racks, bottles, and flasks of different sizes by adjusting compartments. Fitted with heavy duty motor to work on 220 V AC 50 Hz V A single phase. The rate of motion is Adjustable mechanically by belt tension. Speed is fixed in same models to approximately 275 or variable as detailed below.

Vortex Shaker - Cyclo Mixer - Test Tube Shaker Useful for accelerated mixing of solutions in test tubes, small flasks or centrifugal tubes etc. The housing is 150x150 mm. The speed is regulated by a speed control device. Short eccentric stroke motor imparts vigorous agitation to the tubes or flasks. Body is strong and finished in stoving enamel paint. The equipment is workable on 220V AC 50Hz single phase.

Standard double wall fabrication. Inner chamber made of richly anodized aluminum or highly polished stainless steel sheet. Exterior fabricated out of thick mild steel sheet duly finished in stove enamel off-white paint or paste mat finish colour combinations. The gap between the walls is filled with-special grade glass-wool for heat insulation. Inner chamber is ribbed for placing shelves at convenient levels. Provided with two or three removable shelves. Special elegant door closing device has been provided. Nichrome wire heating elements -provided on three sides attain quick and uniform heating in range of 50oC to 250oC + 1oC controlled by capillary type thermostat. L-shaped thermometer is built-in type. Control panel is provided with selector switch of high or low rates of power, thermostate control knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 V AC 50 Hz single phase.

There are four types of kjeldhal1. Kjeldhal units (without glass part)i)Kjeldhal Digestion unit unit of 3 test Heater type 4600.00unit of 6 test Heater type 5700.00unit of 3 test mantel type 4600.00unit of 6 test mantle type 5800.00 II) Kjeldhal Distillation UnitsIII) Kjeldhal Digestion & Distillation Unit (Combined)IV) COD Digestion with Digital Temp. Controller + Digital Timer OPTIONAL:1. Fume duct made of PVC.3 unit 800.00 2. Fume duct made of PVC.6 unit 1500.003. Sunvic Energy regulator 400.004.Glass part for 3 test 1200.005.Glass part for 6 test 2400.00

Range : 340 to 960Resolution: 0.1%T, Abs .0001, Conc.1Output : %T:0to 100% Abs: 0to1.99, Conc: 0to 1999Detecor: Sillicon PhotodiodeLight Source: Tungsten halogen lampGratings : High Performance holographic grating systemSample holder: 10 mm path length, 10&50mm path lengthSpecial brand width: 5nmWavelength Resolution: 1nmWavelength Accuracy : +_2.5 nmRepeatability : +_2 nmDisplay :3 1/2 digit , 3 digit (Wavelength) LED displayPower supply : 230V , 10%AC , 50 HZ Glass part is available & Charges are extra.

We have the speciality in the manufacturing of high vacuum pumps, The material and technology used in such pumps is latest and gives high performance in all types of laboratory use with special high quality motor for hours of service, properly coupled withand on base, Capacity Single stage , Double stage 32 lt/mm. 15000.00 21600.0050 lt/mm 18000.00 26400.00There are many capacitiesOPTIONAL:-1.Vacuum Gauge with regulator 2000.002. Moisture Trap. 2500.003.Non return value 1/2" 1300.004.Non return value 1" 1700.005. Air blast. 1000.00 There are many vacuum pump is OIL FREE.15 liter 9000.0025 liter 12000.0045 liter 17000.0075 liter 20000.00

WATER BATH INCUBATOR SHAKER (Metabolic Shaking Incubator) Useful for studies on tissue metabolism, enzymes and protein coagulation and other experiments demanding shaking at constant speed under controlled temperature conditions. Double walled construction, inner chamber made out of thick highly polished stainless steel sheet and outer made out of thick mild steelduly finished in stoving enamel paint. The lid is made of stainless steel. The gap between the two chambers filled with glass wool to prevent loss of heat. The temperature is achieved by superior immersion heater and is controlled by capillary type thermostat from ambient to 90oC+ 0.5oC.The shaking mechanism is fitted with variable speed motor couple to shaking tray working on rollers.

PH/MV METER DIGITAL MICROPROCESSOR BASED (SOFT TOUCH KEYS)With 4 digit LED display , MTC (Manual Temp.Comp.), 3 points (4.00, 7.00 & 9.20) Auto Buffer recognition, 3points (4.00, 7.00 & 9.20) ph calibration (Auto & Manual). Along with complete accessories (i.e. ph electrode combined , temp.probe, electrode stand, buffer sol, Dust cover & Manual). THERE ARE MANY TYPES OF PH METERS.

Body made out of thick mild steel sheet finished in stoving enamel paint heavy-duty motors of suitable capacities are provided for long time, continuous operation. Fixed speed and variable speed models are offered. Platform provided with rubber discs or wire partitions to hold flasks. To work on 220V AC to 50 Hz single phase.

We are offering hot plate, nu-131 hot plates laboratory hot plates are available in round and rectangular shapes. Body is fabricated out of thick mild steel sheet duly finished in stoving enamel paint. The hot plate made of cast iron, nicely & precisely machined & smoothed duly finished in heat resistant black paint is firmly mounted on the body. Heavy duty heating elements are securely layed under the plate to operate on 220 v ac 50 hz single phase. temp. Is controlled by a three-heat rotary switch along with an indicator lamp for the mains and cord & plug. a) hot plate : (round) single specifications as above with 20 cm.(8”) dia. Moulded top. b) hot plate (round) double as above but with two plates of 20 cm (8”) dia. Having independent pilot lamps & switches

Designed to store cadaverous under cool conditions to prevent decomposition. Double walled construction, outer made out of thick mild steelsheet duly finished in stoving enamel paint and inner made out of stainless steel sheet. The gap between the two is filled with glass wool for temperature insulation. Front opening covered with double walled door with magnetic gasket, lock & key and handle. Individual chambers are provided with independent locks with duplicate keys. Trays to carry dead bodies are provided with handles on both ends travel on rollers fitted on ball bearings for smooth movements. The refrigeration unit is fitted on the rear top. Temperature of +2oC to 4oC is maintained by hermatically sealed compressor unit and is controlled by an automatic electronic digital temp. controller-cum-indicator. Panel is provided with indicators & controllers etc. Completed with cord & plug. The unit is to work on 220V AC 50 Hz single phase.

We are offering mortuary chamberl nu-152 mortuary chamber designed to store cadaverous under cool conditions to prevent decomposition. Double walled construction, outer made out of thick mild steelsheet duly finished in stoving enamel paint and inner made out of stainless steel sheet. The gap between the two is filled with glass wool for temperature insulation. front opening covered with double walled door with magnetic gasket, lock & key and handle. Individual chambers are provided with independent locks with duplicate keys. Trays to carry dead bodies are provided with handles on both ends travel on rollers fitted on ball bearings for smooth movements. The refrigeration unit is fitted on the rear top. Temperature of +2^oc to 4^oc is maintained by hermetically sealed compressor unit and is controlled by an automatic electronic digital temp. Controller-cum-indicator. Panel is provided with indicators & controllers etc. Completed with cord & plug. the unit is to work on 220v ac 50 hz single phase.

 

Capacity Temp. Voltage Stabilizer

• Single body 2^o to 5^oc. 3kva
• Two bodies 2^o to 5^oc 4kva
• Three bodies 2^o to 5^oc 5kva
• Four bodies 2^o to 5^oc 8kva
• Six bodies 2^o to 5^oc 8kva

Double walled and double door. Temperature controlled by thermostat with dial type thermometer , Forced air blower.Chamber Size Tray Inner S.S. Inner M.S430x840x650 8 Tray 46200.00 42000.00430x840x910 12 Tray 56600.00 50400.00910"x840x910 24 Tray 81800.00 68000.00 There are Many Sizes OPTIONAL:1. TImer0-24 hours. 2800.002. Digital Temp. Indicator cum controller 6600.003. Tray 16"x32"x1/4" Size AL 800.004. Tray 16"x32"x1/4" Size SS 1500.00

Conductivity meter digital :dual display LCD & LED microprocessor based (soft touch keys) 4 digit LED & 16x12 line alphanumeric LCD display. THERE ARE MANY TYPES OF CONDUCTIVITY.

Body in made of one-piece aluminium and is logged with special mineral wool. The panel is provided with on-off switch, energy control knob, pilot lamp etc. Provided with jointless hand knitted heating nets of glass yarn capable of withstanding high temperature upto 400^oC. Single supplied complete with cord & plug to work on 220 V AC 50 Hz single phase. Single circuit system has been adopted.

Laminar flow principle involves double filteration of air through coarse pre- filters (upto 5 microns) and Hepa filter (down to 0.3 microns) for filteration of biological and particulate contaminants. A constant uni-directional air flow is drawn from atmosphere and passed through pre and hepa filters on the work surface. Fabricated out of reinforced ply board which is clad in from out side laminated sheet and inner exposed areas are finished in epoxy paint. Table top covered with non-glaring laminated sheet or stainless steel sheet (optional). Side panels are fixed and are made out transparent acrylic sheet. The front door is folding type and made of thick acrylic sheet. (optional) Stand is built in type or detachable. Blower unit has AU or equilavent motor and is dynamically balanced with minimal sound & vibration level. Fluorescent lighting is also provided. A suitable UV tube is provided for sterilization. An acrylic block type manometer to measure static pressure in the chamber has been inustalled.Two way gas tap for gas line has also been provided

Motor driven, oil sealed pump mounted on heavy base. It is driven by V belt at speed upto 400 RPM. Choice of single and double stage available creating Ultimate vacuum of 0.01 mm of Hg column and .0 mm of Hg column respectively. The pump is to work on 220V AC 50 Hz single phase.

Developed as per standard guidelines provided by Central Pollution Control Board. Complete with basic equipment and standard chimney.

 

Models Electrical

• Cap. 3-5 kg.
• Cap. 8-10 kg.
• Cap. 12-15 kg.
• Cap. 18-20 kg.

Suitable for VDRL and other agglutination tests, blood grouping tests and for mixing of solutions in small flasks, beakers or bottles. Body made of sturdy mild steel sheet duly finished in stoving enamel paint. Tray type platform size 300x300 mm can take cavity slides, bottles, flasks etc.for shaking at a fixed speed, by the help of spring wires. Standard fixed speed 180 RPM An automatic 60 minutes timer can be provided against extra cost as optional by which shaking duration can be set. To work on 220V AC 50 Hz single phase.

It constitutes of a washing cylinder made of stainless steel sheet highly polished measuring 63 cm. In height and 15 cm. In diameter and is mounted on a base of 26 cm. diameter. it is provided with a removable pipette holder. It can accommodate pipette of 37.5cm length. It works on the siphoning principle.

Vacuum Pump Oil Free, Vacuum Pump (Oil Free) Capacity Motor 15 Liter 116 hp 25 Liter 18 hp 45 Liter 14 hp.

A versatile equipment to heat slides with just microtomed sections to attain maximum flatness before Staining. Temperature range ambient temperature is thermostatically controlled. The body is made out of thick mild steel duly finished in stoving enamel and top is made of highly polished copper or stainless steel sheet. Complete with thermostatic control knob, indicator lamp, plug & cord etc. to work on 220 V AC 50 Hz single phase.

Casted stainless Steel vessel is electrically operated for getting pyrogen-free distilled water automatically. Wall hanging space saving arrangement is provided. The condenser is seamless. Fitted with automatically ejection device which operates automatically when water vessel gets dried. The baffle cup and condenser are made of stainless steel sheet.

Pipette Washer Automatic It constitutes of a washing cylinder made of stainless steel sheet highly polished measuring 63 cm. In height and 15 cm. In diameter and is mounted on a base of 26 cm. diameter. it is provided with a removable pipette holder. It can accommodate pipette of 37.5cm length. It works on the siphoning principle.

Kjeldhal Digestion & Distillation Units Combined one above the other. A fume duct holder and a heating box are supplied for digestion unit. The heating units have individual on-off switches. In upper portion another heating unit with a condenser rack is provided. The unit is workable on 220 V AC 50 Hz. Single phase. Complete with cord & plug etc.

INCUBATOR BACTERIOLOGICAL Memmert type Inner chamber made out of richly anodized aluminium or highly polished stainless steel sheet and outer made out of thick mild steel sheet finished in white stoving enamel paint or mat finished pastle colour combinations. The gap is filled with special glass wool for temp. insulation. Double wall door with double window for observation in the chamber. Temperature range 5oC above ambient to 80oC + 2oC controlled by a thermostat. L- shaped thermometer is provided for taking temp. readings.

Melting Point App.Microprocessor Controlled The unit consists of a built in magnetic stirrer, glare free background illuminator and cylindrical silicon oil bath. The silicon oil bath consists of a plain cylindrical container of corning glass having capacity of about 200 ml. It is furnished with a Ptfe cover fitted with special type of oil immersion heater, having three small holes for holding the capillaries, one big hole for thermometer and another big hole for boiling point tube Temp. Sensors for calibration purposes. A variable speed stirrer is fitted in it. The apparatus can be used for determination of boiling points, Temp. effect on viscosity flow points and molecular weights by Rasts method with suitable accessories.

Refrigeration Liquid Bath-Cooling Bath Standard double walled construction. Inner chamber made out of 5oCto 90oC and controlled by a sensitive Mercury contact thermometer with an accuracy of + 2oC. Fitted with a stirrer and speed regulator.

Rectangular Muffle Furnace Laboratory Model Outer shell made out of thick mild steel duly finished in attractive stoving enamel paint. Fitted with grooved refractory for supporting the heating elements made out of kanthal wire and are easily replaceable. Maximum temp. 1000oC with working temp. 940oC controlled by SUNVIC energy regulator.

Incubators Bacteriological Inner chamber made out of richly anodized aluminium or highly polished stainless steel sheet and outer made out of thick mild steel sheet finished in white stoving enamel paint or mat finished pastle colour combinations.The gap is filled with special glass wool for temp. insulation. Double wall door with double window for observation in the chamber. Temperature range 5oC above ambient to 80oC + 2oC controlled by a thermostat. L- shaped thermometer is provided for taking temp. readings. Panel is provided with pilot lamps for mains & heaters, On-off switch, temp. Control knob etc. The equipment is workable on 220 V AC 50 Hz single pahse. Heating is achieved from 3 sides. Perforated removable shelves also provided

Melting Point Apparatus Automatic Microprocessor of a miniature furnace with Auto controlled heating rate arrangement, an air circulating arrangement and a digital temp. Indicating circuitry with necessary controls, Temperature at the melting point is latched on the digital display and the furnace is automatically cut-off. The instrument gives audio & visual indications, on reaching the temperature at which the sample melts. The temperature indicating point of the sample remains displayed on the panel till the switch is RESET is operated. Not Suitable for Dark Colored Samples. Opto-coupled light transmission based, Sample required to be transparent at the time of melting. Suitable for Melting Point, Recommended for Melting Range 350C, Readability C, Resolution 1C, Programmable, Automatic ramp Rate Proceeding, Auto Gradient Rate of Heating Control, Sample Capacity 1 Sample, With Cooling arrangement of Furnace,

Dispensing Sampling Booth Our vast industrial experience has enabled us to manufacture and supply a quality range of Dispensing Sampling Booth. These booths are used in medical and forensic laboratories for providing a protecting environment for the workers. To manufacture these booths we use optimum quality materials, sourced from the most reliable and trusted vendors of the market. We can make the Dispensing Sampling Booth available for the clients in different customized specifications as per requirements.

Deep Freezer vertical Upright a quality grade Deep Freezer Vertical Upright. These equipments are used for quick freezing and storing of vaccines, biological & medical specimens & blood samples. To manufacture the equipments, we use finest quality materials sourced from the most reliable vendors. The clients can avail our Deep Freezer Vertical Upright in different customized models and specifications as per requirements.

Rotary Shaker VDRL Rotator Carrier size 13"x13" fitted with geared motor with concentric motion along with time switch range 0 to 15 minutes. Operated on 220230 Volts.

Water Bath Paraffin WATER BATH PARAFFIN Thermostatically controlled. Double walled with cups and shelves for glass tubes. Temp. upto 95C with an accuracy of + 0.5oC to + 1oC. Stainless Steel. A. 4 Cups & 6 Sleeves . B. 6 Cups & 8 Sleeves. C 12 Cups & 14 Sleeves

Oil Bath (High Temp.) with Stirrer Inner chamber made of highly polished stainless steel or copper sheet and outer made of mild steel duly finished in stoving enamel. Temperature range 50oC to 250oC + 2oC is controlled by a thermostat. Supplied complete with stirrer, diffuser shelves, cover etc. panel provided with on-off switch, pilot lamps thermostatic control knob etc.

Laminar Air Flow Horizontal of air through coarse pre- filters (upto 5 microns) and Hepa filter (down to 0.3 microns) for filteration of biological and particulate contaminants. A constant uni-directional air flow is drawn from atmosphere and passed through pre and hepa filters on the work surface. Fabricated out of reinforced ply board which is clad in from out side laminated sheet and inner exposed areas are finished in epoxy paint. Table top covered with non-glaring laminated sheet or stainless steel sheet (optional). Side panels are fixed and are made out transparent acrylic sheet. The front door is folding type and made of thick acrylic sheet. (optional) Stand is built in type or detachable. Blower unit has AU or equilavent motor and is dynamically balanced with minimal sound & vibration level. Fluorescent lighting is also provided. A suitable UV tube is provided for sterilization. An acrylic block type manometer to measure static pressure in the chamber has been inustalled.Two way gas tap for gas line has also been provided

Drying Oven Industrial Double walled and double door. Temperature con trolled by thermostat with dial type thermometer. Forced air blower.

Kjeldhal Distillation Units Asbestos tops mounted on mild steel tubular stand. Provided with condenser clamps and water manifold. Unit of 3 tests (Heater type).

Water Still Table Model Double wall construction having both made out of highly polished stainless steel sheet. The gap between the two is filled with glass wool for heat insulation. It is easy to handle table model working on 220 V AC 50 Hz single phase.

Hot Plate Rectangular are available in round and rectangular shapes. Body is fabricated out of thick mild steel sheet duly finished in stoving enamel paint. The hot plate made of cast iron, nicely & Precisely machined & smoothed duly finished in heat resistant black paint is firmly mounted on the body. Heavy duty heating elements are securely layed under the plate to operate on 220 V AC 50 Hz single phase. Temp. is controlled by a three-heat rotary switch along with an indicator lamp for the mains and cord & plug.

Reciprocating Shaking Machine Khan Rack Type for shaking khan racks, bottles, and flasks of different sizes by adjusting compartments. Fitted with heavy duty motor to work on 220 V AC 50 Hz V A single phase. The rate of motion is Adjustable mechanically by belt tension. Speed is fixed in same models to approximately 275 or variable as detailed below.

Vortex Shaker - Cyclo Mixer - Test Tube Shaker Useful for accelerated mixing of solutions in test tubes, small flasks or centrifugal tubes etc. The housing is 150x150 mm. The speed is regulated by a speed control device. Short eccentric stroke motor imparts vigorous agitation to the tubes or flasks. Body is strong and finished in stoving enamel paint. The equipment is workable on 220V AC 50Hz single phase.

Standard double wall fabrication. Inner chamber made of richly anodized aluminum or highly polished stainless steel sheet. Exterior fabricated out of thick mild steel sheet duly finished in stove enamel off-white paint or paste mat finish colour combinations. The gap between the walls is filled with-special grade glass-wool for heat insulation. Inner chamber is ribbed for placing shelves at convenient levels. Provided with two or three removable shelves. Special elegant door closing device has been provided. Nichrome wire heating elements -provided on three sides attain quick and uniform heating in range of 50oC to 250oC + 1oC controlled by capillary type thermostat. L-shaped thermometer is built-in type. Control panel is provided with selector switch of high or low rates of power, thermostate control knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 V AC 50 Hz single phase.