Post Buy Requirement
NP
Jaipur, Rajasthan, India
Add Review

Industrial Pump

Shallow Well Pumps

  • Power Range 0.5, 1.0 & 1.1 HP
  • Version 220-240V, 50 Hz, A.C.-1 Phase, . Permanent Split capacitor (PSC) Incorporated with Thermal Overload Protector.
  • Speed 2880 rpm.
  • Duty S1 (Continuous)
  • Degree of Protection IP 54
  • Insulation Class B
  • Discharge range 960 - 3080 Iph
  • Head range 12 - 28 mtr.
  • Suction lift up to 8 mtr.
  • Suction x Delivery size 25 x 25 mm
  • Material of Construction Pump Casing
  • Cast Iron / MS Motor Body
  • Aluminum / Cast Iron Impeller
  • Cast Iron / Noryl Diffuser
  • Cast Iron / Noryl Shaft
  • EN-8 Sealing

NeerShallow well Pumps are powered by a totally enclosed fan cooled, AC induction motor, complete absence of suction trouble, suitable for long hours duty. Motor stator is made of low watt loss steel laminations assembled under pressure with rigidly in the frame. Well-balanced rotor ensures vibration and noise free operations. The varnish impregnated windings made of enameled copper wire offer excellent resistance power. Shaft made out of best quality steel, precision ground of ample size, which helps to transmitting the rated Horsepower. All single-phase versions up to 1.0 HP are incorporated with Thermal Over load protector. Application of Regenerative self priming monoblock pumpset is in Hospitals, Water circulation systems, Water supply systems of Gardening, Nurseries, Domestic water supply, Multi-storey Building & Industries.

NeerRegenerative self priming monoblock pumpset are of good self priming capacity, dynamically balanced rotating parts, optimal design, High operating efficiency, high working pressure & designed for wide voltage fluctuations.


Application in :
Supply systems of small gardens.
domestic pressure boosting
Drinking water supply in Small industries
Water Supply in small farms
Watar supply in Nurseries

View Complete Details

Horizontal Multistage Centrifugal Pump

  • Power Range 0.5 HP — 2 HP in 1 & 3 Phase
  • Dimensions 96 X 115 mm Suitable for 8 mm/10 mm Bolt
Horizontal Multistage Booster Pumps are the products of the expertise gained from over four decades of experience, endurance and workmanship. Neer products are engineered to perfection with utmost care and stringent quality control at all stages to ensure a trouble free service. Neer horizontal multistage centrifugal pumps are axial suction and vertical radial delivery with threaded ports. The impellers, diffusers and shaft of these pumps are made of stainless steel and designed to deliver the best possible hydraulic efficiency . This pump is a non-self priming horizontal centrifugal pump with mechanical shaft seal and sealing is by means of a bellows mechanical seal. These pumps are powered by at any enclosed fan cooled A.C. induction motor , suitable for continuous duty . Motor stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensures vibration free and noise free operations. Shaft is made of quality stainless steel. All single-phase pumps are incorporated with thermal over load protector. These pumps require an adequate startermotor protector control panel.
View Complete Details

Multistage Centrifugal Pumps

  • Power Range   0.5 HP — 2 HP in 1 & 3 Phase
  • Version 200 - 240 V In 1 Phase & 380-415 V in 3 Phase, A.C, 50 Hz
  • Discharge Range 13 — 117 lpm
  • Head Range 20 - 41 mtr
  • Outlet size 25x25 mm
  • Water temperature 90° C
  • Speed 2680 rpm.
  • Ambient temperature 55°C
  • Insulation Class B
  • Degree of Protection IP 54
  • Main Dimensions (mounting) Foot Mount - 96 X 115 mm Suitable for 8 mm/10 mm Bolt
  • Material of Construction – Pump Pump Casing
  • Cast Iron Pump Bracket
  • Cast lron Impeller
  • Stainless Steel Diffuser
  • Stainless Steel Motor Body
  • Aluminum Shaft
  • SS - 410 Mechanical Seal
  • Carbon V/S Ceramic Base Plate

Horizontal Multistage Booster Pumps are the products of the expertise gained from over four decades of experience, endurance and workmanship. Neer products are engineered to perfection with utmost care and stringent quality control at all stages to ensure a trouble free service.
Neerhorizontal multistage centrifugal pumps are axial suction and vertical radial delivery with threaded ports. The impellers, diffusers and shaft of these pumps are made of stainless steel and designed to deliver the best possible hydraulic efficiency . This pump is a non-self priming horizontal centrifugal pump with mechanical shaft seal and sealing is by means of a bellows mechanical seal.
These pumps are powered by at any enclosed fan cooled A.C. induction motor , suitable for continuous duty . Motor stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensures vibration free and noise free operations. Shaft is made of quality stainless steel. All single-phase pumps are incorporated with thermal over load protector. These pumps require an adequate starter/motor protector control panel.

Salient Features
Fitted with motor protector
SS304 Impellers and stage casings
Designed for wide voltage fluctuations
Aluminum body for better the heat dissipation
Higher working pressure
Sturdy and compact


Application in:
Pressure Boosting in commercial R.O & others
Water circulation In DM Plant.
Pumping of clean liquids in industry
Water boosting in commercial establishments
Car washing, small farms & multistory buildings

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Neer Pumps Industries (Neer Pumps Industries)
  • C-45,22 Godown Industial Area , Gali No.3,Opp Bank off Baroda RIICO Industrial, RIICO Industrial Area, Jaipur, Rajasthan - 302006
  • Share us via
Retailer of Industrial Pump from Jaipur, Rajasthan by Neer Pumps Industries
Post Buy Requirement
NP
Jaipur, Rajasthan, India
Add Review

Industrial Pump

Shallow Well Pumps

  • Power Range 0.5, 1.0 & 1.1 HP
  • Version 220-240V, 50 Hz, A.C.-1 Phase, . Permanent Split capacitor (PSC) Incorporated with Thermal Overload Protector.
  • Speed 2880 rpm.
  • Duty S1 (Continuous)
  • Degree of Protection IP 54
  • Insulation Class B
  • Discharge range 960 - 3080 Iph
  • Head range 12 - 28 mtr.
  • Suction lift up to 8 mtr.
  • Suction x Delivery size 25 x 25 mm
  • Material of Construction Pump Casing
  • Cast Iron / MS Motor Body
  • Aluminum / Cast Iron Impeller
  • Cast Iron / Noryl Diffuser
  • Cast Iron / Noryl Shaft
  • EN-8 Sealing

NeerShallow well Pumps are powered by a totally enclosed fan cooled, AC induction motor, complete absence of suction trouble, suitable for long hours duty. Motor stator is made of low watt loss steel laminations assembled under pressure with rigidly in the frame. Well-balanced rotor ensures vibration and noise free operations. The varnish impregnated windings made of enameled copper wire offer excellent resistance power. Shaft made out of best quality steel, precision ground of ample size, which helps to transmitting the rated Horsepower. All single-phase versions up to 1.0 HP are incorporated with Thermal Over load protector. Application of Regenerative self priming monoblock pumpset is in Hospitals, Water circulation systems, Water supply systems of Gardening, Nurseries, Domestic water supply, Multi-storey Building & Industries.

NeerRegenerative self priming monoblock pumpset are of good self priming capacity, dynamically balanced rotating parts, optimal design, High operating efficiency, high working pressure & designed for wide voltage fluctuations.


Application in :
Supply systems of small gardens.
domestic pressure boosting
Drinking water supply in Small industries
Water Supply in small farms
Watar supply in Nurseries

View Complete Details

Horizontal Multistage Centrifugal Pump

  • Power Range 0.5 HP — 2 HP in 1 & 3 Phase
  • Dimensions 96 X 115 mm Suitable for 8 mm/10 mm Bolt
Horizontal Multistage Booster Pumps are the products of the expertise gained from over four decades of experience, endurance and workmanship. Neer products are engineered to perfection with utmost care and stringent quality control at all stages to ensure a trouble free service. Neer horizontal multistage centrifugal pumps are axial suction and vertical radial delivery with threaded ports. The impellers, diffusers and shaft of these pumps are made of stainless steel and designed to deliver the best possible hydraulic efficiency . This pump is a non-self priming horizontal centrifugal pump with mechanical shaft seal and sealing is by means of a bellows mechanical seal. These pumps are powered by at any enclosed fan cooled A.C. induction motor , suitable for continuous duty . Motor stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensures vibration free and noise free operations. Shaft is made of quality stainless steel. All single-phase pumps are incorporated with thermal over load protector. These pumps require an adequate startermotor protector control panel.
View Complete Details

Multistage Centrifugal Pumps

  • Power Range   0.5 HP — 2 HP in 1 & 3 Phase
  • Version 200 - 240 V In 1 Phase & 380-415 V in 3 Phase, A.C, 50 Hz
  • Discharge Range 13 — 117 lpm
  • Head Range 20 - 41 mtr
  • Outlet size 25x25 mm
  • Water temperature 90° C
  • Speed 2680 rpm.
  • Ambient temperature 55°C
  • Insulation Class B
  • Degree of Protection IP 54
  • Main Dimensions (mounting) Foot Mount - 96 X 115 mm Suitable for 8 mm/10 mm Bolt
  • Material of Construction – Pump Pump Casing
  • Cast Iron Pump Bracket
  • Cast lron Impeller
  • Stainless Steel Diffuser
  • Stainless Steel Motor Body
  • Aluminum Shaft
  • SS - 410 Mechanical Seal
  • Carbon V/S Ceramic Base Plate

Horizontal Multistage Booster Pumps are the products of the expertise gained from over four decades of experience, endurance and workmanship. Neer products are engineered to perfection with utmost care and stringent quality control at all stages to ensure a trouble free service.
Neerhorizontal multistage centrifugal pumps are axial suction and vertical radial delivery with threaded ports. The impellers, diffusers and shaft of these pumps are made of stainless steel and designed to deliver the best possible hydraulic efficiency . This pump is a non-self priming horizontal centrifugal pump with mechanical shaft seal and sealing is by means of a bellows mechanical seal.
These pumps are powered by at any enclosed fan cooled A.C. induction motor , suitable for continuous duty . Motor stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensures vibration free and noise free operations. Shaft is made of quality stainless steel. All single-phase pumps are incorporated with thermal over load protector. These pumps require an adequate starter/motor protector control panel.

Salient Features
Fitted with motor protector
SS304 Impellers and stage casings
Designed for wide voltage fluctuations
Aluminum body for better the heat dissipation
Higher working pressure
Sturdy and compact


Application in:
Pressure Boosting in commercial R.O & others
Water circulation In DM Plant.
Pumping of clean liquids in industry
Water boosting in commercial establishments
Car washing, small farms & multistory buildings

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Neer Pumps Industries (Neer Pumps Industries)
  • C-45,22 Godown Industial Area , Gali No.3,Opp Bank off Baroda RIICO Industrial, RIICO Industrial Area, Jaipur, Rajasthan - 302006
  • Share us via