Our Products
Any low voltage cable or busbar design is a candidate for ERIFLEX FLEXIBAR, including:
ERICO offers a wide range of Single Pole, Double Pole & Four Pole Distribution blocks, from 80 A to 500 A.
PVC Insulated & Sheathed Multi Core Flexible Round Wire, Volt 660-1100V with IS 694(90)
Disclaimer: This information is to the best of our knowledge & accurate but all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control. The typical values given do not constitute specification for the product but represent typical analytical values.
Nominal Area of conductor mm | No. & Dia of wire mm | Nominal Thickness of insulation mm | Nominal Thickness of Sheathed | Overall Diameter | ||||
---|---|---|---|---|---|---|---|---|
2 core | 3 core | 4 core | 2 core | 3 core | 4 core | |||
0.50 | 16/0.20 | 0.60 | 0.90 | 0.90 | 0.90 | 6.25 | 6.60 | 6.85 |
0.75 | 24/0.20 | 0.60 | 0.90 | 0.90 | 0.90 | 6.70 | 7.10 | 7.40 |
1.00 | 32/0.20 | 0.60 | 0.90 | 0.90 | 0.90 | 7.00 | 7.40 | 7.70 |
1.50 | 30/0.25 or 48/0.20 | 0.60 | 0.90 | 0.90 | 1.00 | 7.70 | 8.15 | 8.45 |
2.50 | 50/0.25 or 80/0.20 | 0.70 | 1.00 | 1.00 | 1.00 | 9.20 | 9.75 | 10.10 |
4.00 | 56/0.30 | 0.80 | 1.00 | 1.00 | 1.00 | 10.65 | 11.30 | 11.75 |
6.00 | 84/0.30 | 0.80 | 1.10 | 1.10 | 1.20 | 12.20 | 13.00 | 13.75 |
10.00 | 80/0.40 or 140/0.30 | 1.00 | 1.20 | 1.20 | 1.30 | 15.60 | 16.40 | 17.30 |
16.00 | 128/0.40 or 226/0.30 | 1.00 | 1.30 | 1.30 | 1.40 | 17.85 | 19.00 | 19.85 |
25.00 | 200/0.40 or 353/0.30 | 1.20 | 1.40 | 1.50 | 1.60 | 21.80 | 23.35 | 25.50 |
Polyvinyl Chloride Insulated Polyvinyl Chloride Sheathed Overall Screened Instrument Cable
Single pair and multi-pair cables with copper conductor, PVC insulated, overall screened and PVC sheathed. Voltage rated at 300/500V.
Polyvinyl Chloride Insulated Polyvinyl Chloride Sheathed Individual & Overall Screened Instrument Cable
Multi-pair cables with copper conductor, PVC insulated, individual & overall screened and PVC sheathed. Voltage rated at 300/500V.
Polyvinyl Chloride Insulated Polyvinyl Chloride Bedding Steel Wire Armoured Polyvinyl Chloride Sheathed Overall Screened Instrument Cable
Single pair and multi-pair cables with copper conductor, PVC insulated, overall screened, PVC bedding, Steel wire armoured and PVC sheathed. Voltage rated at 300/500V
Polyvinyl Chloride Insulated Polyvinyl Chloride Bedding Steel Wire Armoured Polyvinyl Chloride Sheathed Individual & Overall Screened Instrument Cable
Multi-pair cables with copper conductor, PVC insulated, individual & overall screened, PVC bedding, Steel wire armoured and PVC sheathed. Voltage rated at 300/500V
Conductor (Copper) As per IS 8130 / IEC 60228 |
Stranded Conductor (ABC/ATC) (Class-II) |
0.50sqmm (7/0.30mm) |
0.75sqmm (7/0.37mm) | ||
1.00sqmm (7/0.43mm) | ||
1.50sqmm (7/0.53mm) | ||
2.50sqmm (7/0.67mm) | ||
Flexible Conductor (ABC/ATC) (Class V) |
0.50sqmm (16/0 .20mm) | |
0.75sqmm (24/0.20mm) | ||
1.00sqmm (32/0.20mm) | ||
1.50sqmm (48/0.20mm) | ||
2.50sqmm (80/0.20mm) | ||
Core Insulation | PVC Type A- 70°C | Standard Insulation Thickness: 0.60mm |
PVC Type C-85°C | Colour code as per BS 5308/1S-15541 or as per customer requirements. |
|
PVC Type C-1 05°C | ||
LOPE Insulation | ||
Any other grade as per customer requirement. | ||
Units | Core | Colour code as per BS 5308/IS-1 554-I |
Pair | or as per customer requirements. | |
Triad | Twisting: Minimum 12 crossover Twists/meter |
|
Quad | ||
Unit Screen | 1 layer of polyster tape | Polyster tape 25 micron thick |
1 tinned copper drain wire | 0.50sqmm ATC | |
1 Layer of Aluminium backed myler tape with 25% overlap for 100% coverage. |
Al. Myler tape 25micron thick | |
1 Layer of Polyster Tape. | Polyster tape 25 micron thick | |
Number of Units | Single Unit | |
Multi Unit | ||
Communication Pair | 0.50sqmm ABC insulated, Twisted Iiiir | Provided for cables with 6 Pairs/6Triads/6Quads and above. |
Overall Screen | Same as for Unit screen (Cl. 4) | |
Inner sheath | PVC Type ST-1 70°C | Standard Thickness: 0.80mm |
PVC Type ST2 -85°C FR | Colour code: Black. | |
PVC Type FRLS | ||
Armour | Galvanised round GI wire | Standard size: 0.90 mm ,1.40 mm |
(as per customer requirement ) | ||
Galvanised Flat GI Strips | 4 x 0.80 mm | |
Outer Sheath | PVC Type ST-1 70°C | Thickness as per BS- 5308, |
PVC Type 8T2 -85°C FR | IS-1554 P(i) | |
PVC Type FRLS | As per customer requirement |
Our Superior Quality Cable Ties are manufactured with Nylon 6.6 and are vey economically priced.
Manufactured & Tested as per international standard "IEC62275" for Cable Management System.
Self Adhesive Tie Mountsoffered compromise simple to apply and peel off backing support that can be applied to the surface mount of the cables.
Sr No. | Particulars |
---|---|
1. | 65 mm x 2.0 mm |
2. | 80 mm x 2.0 mm |
3. | 100 mm x 2.0 mm |
4. | 100 mm x 2.5 mm |
5. | 150 mm x 2.5 mm |
6. | 150 mm x 3.6 mm |
7. | 200 mm x 3.6 mm |
8. | 250 mm x 3.6 mm |
9. | 250 mm x 4.8 mm |
10. | 300 mm x 4.8 mm |
Sr No. | Particulars |
---|---|
11. | 300 mm x 7.4 mm |
12. | 368 mm x 4.8 mm |
13. | 450 mm x 4.8 mm |
14. | 450 mm x 7.4 mm |
15. | 500 mm x 7.9 mm |
16. | 550 mm x 7.9 mm |
17. | 650 mm x 9.0 mm |
18. | 750 mm x 9.0 mm |
19. | 920 mm x 9.0 mm |
20. | 1220 mm x 9.0 mm |
Sr No. | Size (mm) | No. Of Louvers | Fan Compatibility |
---|---|---|---|
1. | 90 x 90 | 9 | 3 Inch |
2. | 130 x 130 | 14 | 4 Inch |
3. | 184 x 184 | 15 | 6 Inch |
4. | 238 x 238 | 19 | 8 Inch |
Snap Latch are Used in Panel Doors.
Control Panel Door Knobs with Metal Lever are used in Panel Doors
Metal Checknut Door Knobs also Avialable
MIL-1-23053/5 Class 2 & 3, Ul224 (File no. E328538) 1250C VW1, CSA C22.2
Out Heat Shrinkable Tubes are designed to insulate busbar systems up to 36KV & to protect against accidental flashover. The tubes are manufactured from high quality non tracking crosslinked polyolefin material. Meets ANSI C37.20.2 standards for MV switchgear application up to 36 KV.
Test Description | Recorded Vaue | Test Method |
---|---|---|
Physical | ||
Tensile Strength | 12 N/mm2 (MPA) (min.) | ASTM D638 |
Ultimate Elongation | 300% (min.) | ASTM D638 |
WaterAbsorption | 0.5% (max.) | ASTM D570 |
Density | 1.20 ± 0.2 gm/cm3 | ASTM D792 |
Hardness | 45 ± 10 shore D | ASTM D2240 |
Thermal | ||
Accelerated ageing | (120oC for 500 Hrs) | ASTM D2671 |
Tensile Strength | 10 N/mm2 (Mpa) (min.) | ASTM D 638 |
Ultimate Elongation | 250% (Min.) | ASTM D 638 |
Low temperature Flexibility (-40ºC for 4 Hrs.) | No Cracking | ASTM D2671 |
Heat Shock (250oC for 30 Min.) | No Cracking or flowing | ESI 09-11 |
Shrink Temperature | 125oC | IEC 216 |
Continuous Temp. Limit | -40oC to + 105oC | IEC 216 |
We are pleased to introduce our Ribbon / Cartridge Suitable for Printing in Max Letatwin Ferrule Printing Machine Model LM 380 / LM 390 / LM 390 A. Our cartridges are 100% manufactured in India.
Size |
Length |
Packing Per Packet |
Min. Packing |
|
IN |
MM |
100 Nos. |
Per Carton Pkt |
|
65x2.0 |
2.5 |
65 |
100 |
1000 |
100x2.5 |
4 |
100 |
100 |
600 |
150x3.6 |
6 |
150 |
100 |
250 |
200x3.6 |
8 |
200 |
100 |
200 |
250x3.6 |
10 |
250 |
100 |
170 |
300x3.6 |
12 |
300 |
100 |
140 |
200x4.8 |
8 |
200 |
100 |
150 |
250x4.8 |
10 |
250 |
100 |
150 |
300x4.8 |
12 |
300 |
100 |
120 |
368x4.8 |
15 |
368 |
100 |
100 |
400x4.8 |
16 |
400 |
100 |
100 |
450x4.8 |
18 |
450 |
100 |
90 |
550x4.8 |
22 |
550 |
100 |
70 |
450x7.6 |
18 |
450 |
100 |
60 |
500x7.9 |
20 |
500 |
100 |
35 |
550x7.9 |
22 |
550 |
100 |
35 |
650x9.0 |
26 |
650 |
100 |
30 |
750x9.0 |
30 |
750 |
100 |
10 |
920x9.0 |
36 |
920 |
100 |
10 |
1220x9.0 |
48 |
1220 |
100 |
10 |
High Tensile PVC covered steel wire hose are thin walled and light in weight and are very flexible for industrial purposes. Sizes produced are10 mm ID to 200 mm ID.
Our hoses have a reinforcement of PVC insulated high carbon grade II spring steel wires from 200 Uts Kg/mm2to 220 Uts Kg/mm2 (United Tensile Strength). Also available in high grade III for heavy duty pipes.
Super Flexibility
Our Hoses are highly flexible and will flex on it own diameter without deformation or any reduction in its cross section. This special feature reduces installation time in the most unapproachable area of application.
Temperature Resistance
Our Hoses can withstand a temperature from 150C to 600C and are inherently flame retardant. However hoses can be supplied on special request with heat resistant PVC which can withstand temperatures from -300C to 1050C.
Electrical Resistance
Our Hoses have excellent dielectric properties. There is no danger of short circuit taking place due to steel wire, as it is fully insulated with pvc. There are no other harmful effects due to spring steel wire, when used near panels. Infact, it is a kind of an armoring and protects the cable inside.
Self Extinguishing
Our Hoses do not propagate fire. It is self-extinguishing. The hose will cease to burn as soon as direct source of flame is removed.
Chemical Resistance
Our Hoses resist most chemicals, acids, alkalis, greases, petrol, etc. They are waterproof and suitable for application in damp environments.
Mechanical Resistance
Our Hoses are have very high crush resistance for development of "kinks" and excellent shockproof properties due to the spring steel wire reinforcement.
Code No. | Inner Dia of Hose (mm) | Standard Pkgs. (No's) |
---|---|---|
RPG 9.00 | 10 | 100 |
RPG 13.50 | 15 | 100 |
RPG 16.00 | 20 | 100 |
RPG 21.00 | 25 | 100 |
RPG 29.00 | 30 | 50 |
RPG 40.00 | 40 | 50 |
RPG 48.00 | 50 | 50 |
We are prominent supplier of PG Threaded Nylon Flexible Cable Glands.
Sr. No. | Cable Range (in mm) |
Part No. | List Price | SW | A | B |
C Max. Min. |
D | E | |
---|---|---|---|---|---|---|---|---|---|---|
1. | 2.5-6.5 | PG-7 | 6.6 | 15 | 16.75 | 7.25 | 32 28 | 7.5 | 12 | |
2. | 03/05/08 | PG-9 | 7.6 | 18.75 | 21 | 9 | 35.75 30.5 | 8.25 | 16.25 | |
3. | 04/10/13 | PG-11 | 9.1 | 21.5 | 24 | 11 | 38.5 32.25 | 8.25 | 17 | |
4. | 05/12/13 | PG-13.5 | 9.9 | 23.75 | 26.5 | 12.75 | 37.75 32.25 | 9 | 17.5 | |
5. | 09/14/13 | PG-16 | 13.4 | 26.75 | 29.5 | 14.5 | 42.5 37 | 10 | 18.75 | |
6. | 13-18 | PG-21 | 18.8 | 32.5 | 35.5 | 18.5 | 49.5 42 | 11 | 22 | |
7. | 14-25 | PG-29 | 33 | 43 | 47 | 27 | 54.5 43 | 11 | 27.5 | |
We are pleased to introduce our special Duct Cutter for PVC Channel, which is 100% manufactured in India. These Duct Cutter are highly economical and time saving. We also supply loose extra blades and nylon supports on request.
Magnetic Reed Switches are a substitute for Mechanical Limit Switches.
They are used in extreme conditions such as high or low startup speeds in elevators, high switching frequencies, strong dust or dirt influence, high humidity, chemical atmosphere or large fluctuations in operating intervals.
Please drop a mail to get more details / suggestions on Magnetic Reed Switches as per your applications.