Our Products
We offer high quality Planner Machines, which are used in rolling mills, cement plants, paper mills, sugar mills etc. Our Heavy Duty Planner Machines are designed keeping user friendliness as top priority.
Design: It is a very double rigid column and body bore system planner fitted with ball bearings.
The Bed: The bed is of deep box section type and is tied together at frequent intervals by double walled bridge pieces extending to the bottom of the bed.
The Table: It is of box section type and is streamlined with hand scraped 'V' way to bear heavy load. It is heavily ribbed and the Rack provided in it is accurately machines and milling cut.
The Bearings: The main bearings for the Gearings are cast solid with the Bed. Thea Gears Teeth are hobbing machine cut except two gears are helical. Gun metal bearings have been provided for all the shaft and loose pulleys. Taper roller bearings can also be provided instead of Gun metal bushes.
The Cross Rail: This is of Box section type with large surface. It is suitable for both hand and mechanical drive.
Tool Posts: These are manufactured out of close grain alloy castings and steel to stand heavy cut. These can be driven both manually and mechanically.
The Uprights: The uprights are of rigid box section type. keysed firmly, bolted on to bed and are capable of absorbing the heaviest shocks without vibration, Extra pins are provided to re-fit the machine accurately after once it is dismantled.
The Drive: The machine is arranged for direct individual as well as two belt drive.
Accessories: Automatic lifting arrangements of cross rail.
Technical Specification
Size | ft. mm |
8" 2438 |
10" 3048 |
12" 3657 |
14" 4267 |
16" 4876 |
18" 5486 |
20" 6096 |
22" 6705 |
24" 7315 |
" 7925 |
28" 8535 |
30" 9144 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Length of Bed V'S | ft. mm |
12" 3657 |
15" 4572 |
18" 5486 |
21" 6400 |
24" 7315 |
27" 8229 |
30" 9144 |
33" 10059 |
36" 10973 |
39" 11887 |
42" 12802 |
45" 13716 |
Length of bed all over | ft. mm |
13" 3962 |
16" 4877 |
19" 5791 |
22" 6705 |
25" 7620 |
28" 8534 |
31" 9449 |
34" 10364 |
37" 11278 |
40" 12192 |
43" 13107 |
46" 14021 |
Stroke of table | ft. mm |
8" 2438 |
10" 3048 |
12" 3657 |
14" 4267 |
16" 4876 |
18" 5486 |
20" 6096 |
22" 6705 |
24" 7315 |
26" 7925 |
28" 8535 |
30" 9144 |
Length of table all over | ft. mm |
9" 2743 |
11" 3553 |
13" 3962 |
15" 4572 |
17" 5181 |
19" 5791 |
21" 6401 |
23" 7010 |
25" 7620 |
27" 8230 |
29" 8840 |
31" 9449 |
Thickness of Table | ft. mm |
7-½" 190 |
7-½" 190 |
7-½" 190 |
9" 225 |
9" 225 |
9" 225 |
9" 225 |
9" 225 |
9" 225 |
9" 225 |
9" 225 |
9" 225 |
Planing Width | ft. mm |
4" 1219 |
4- ½" 1371 |
5" 1524 |
5-½" 1676 |
6-¼" 1905 |
6-½" 1981 |
6-½" 1981 |
6-½" 1981 |
6-½" 1981 |
6-½" 1981 |
6-½" 1981 |
6-½" 1981 |
Height under cross rail | ft. mm |
40" 1219 |
4-½" 1371 |
4-½" 1371 |
5" 1524 |
5" 1524 |
5" 1524 |
5" 1524 |
5" 1524 |
5" 1524 |
5" 1524 |
5" 1524 |
5" 1524 |
Cutting Speed P.M | ft. mm |
40" 12000 |
40" 12000 |
40" 12000 |
40" 12000 |
40" 12000 |
30" 9000 |
30" 9000 |
30" 9000 |
30" 9000 |
30" 9000 |
30" 9000 |
30" 9000 |
Return Speed P.M | ft. mm |
55" 16500 |
55" 16500 |
55" 16500 |
55" 16500 |
55" 16500 |
45" 13500 |
45" 13500 |
45" 13500 |
45" 13500 |
45" 13500 |
45" 13500 |
45" 13500 |
Method of driving planer | |||||||||||||
H.P. Reco- | 5 | 7-½ | 10 | 10 | 10 | 15 | 15 | 15 | 20 | 20 | 25 | 25 | |
Weight in M. Tons (Appox) | 8 | 10 | 11 | 16 | 18 | 20 | 22 | 25 | 28 | 30 | 32 | 35 |
We present a wide range of inexplicable quality Plano Miller Machines that is available in various specifications. Our Double Column Plano Miller Machine is extensively used in heavy industries for various purposes. Fabricated with premium quality raw materials, our Double Column Plano Miller Machine is rugged. Our Plano Miller Machine is technically advanced machine that has high machining capacity. Being a heavy duty and high speed machine, it provides excellent performance even in extreme conditions. Our plano milling machine is a user friendly machine that needs low maintenance and helps us to be leaders among Lathe Plano Miller Machine Suppliers in Punjab, India.
Features:
Technical Specification
Model | Units | SPM3 | SPM4 | SPM5 | SPM6 | SPM15 | SPM10 | SPM15 |
---|---|---|---|---|---|---|---|---|
Max. Job Length | mm | 3000 | 4000 | 5000 | 6000 | 8000 | 10000 | 15000 |
Max. Job Width | mm | - | - | - | 1000-5000 | - | - | - |
Max. Job Height | mm | - | - | - | 1000-5000 | - | - | - |
Table | ||||||||
Length | mm | 3000 | 4000 | 5000 | 6000 | 8000 | 10000 | 15000 |
Width | mm | - | - | - | 800-3000 | - | - | - |
Height | mm | - | - | - | 800-3000 | - | - | - |
BED LENGTH | mm | 6000 | 8000 | 10000 | 12000 | 16000 | 20000 | 30000 |
MILLING HEAD | ||||||||
No. of Speeds | - | - | - | - | 44359 | - | - | - |
Range of Speeds | - | - | - | - | 50 -500 | - | - | - |
Motor Power | H.P. | - | - | - | 5-7.5-10-15-20 | - | - | - |
No. of Cross Feeds | - | - | - | - | 44261 | - | - | - |
Table Feed Motor | - | - | - | - | 18384 | - | - | - |
Cross Slide Lift Motor | - | - | - | - | 38390 | - | - | - |
Features:
We manufacture high quality Shaper Machines, which are in high demand in global market because of their excellent performance. The Gear Shaper Machines, provided by us, have a well ribbed based, which provides stability and can be fitted on foundation bolts. Moreover, our Hydraulic Shaper Machine is available with a column that is a heavy box section and has substantial internal webs. Wide front and ram slides accurately scrapped, ensure rigidity and alignment when the full power of machine is utilized.
The ram is of heavy cross section to resist cutting stresses. Alignment is preserved by well proportion VEE type bearings adequate means of lubrication are provided and flet wipers are fitted to protect the slides. The tool head is graduated and may be swiveled to any angle upto 90 degree. The Cross slide has long guides, with a deep frontal bearing ensuring adequate support for the table. The verticals screw is fitted with a ball thrusts bearing to obtain a light and easy movement. The table universal or Fix, is provided with the slots on the top as well as on one side and has bolts on the other side.
The Bull wheel is cut with helical teeth to prevent chattte and ensure a smooth even drive to the ram. A reliable stroke adjusting mechanism is provided in it. The drive from the motor is by multiple vee belts through a claw clutch for three different speeds. Machines can be supplied when required with a pulley drive incorporating the clutch. The Automatic self acting horizontal feed motion is arranged to give 3 optional feeds per stroke of the ram. The vice is of the single screw type and has deep and wide inter changeable jaws. The swiveling base is accurately graduated.
Such unbeatable features of our products make us the best Industrial Shaper Machine Manufacturer in Batala from Punjab.
Technical Specification
Inches | mm | Inches | mm | Inches | mm | |
---|---|---|---|---|---|---|
Adjustability of Stroke | 18 | 459 | 26 | 663 | 30 | 765 |
Length | 39 | 995 | 52 | 1326 | 55 | 1402 |
Tool Head | 7-¼ | 184 | 8. ½ | 210 | 8. ½ | 217 |
Tool Head Feed | 6 | 153 | 7 | 178 | 7 | 178 |
Tools holds in Tool holder | ¾ | 19 | 7/8 x13/4 | 22 x 43 | 7/8 x 43 | 22 x 3 |
Nos. of speed | 3 | 3 | 3 | 3 | 3 | 3 |
Types of belts | VeeS | Vee | Vee | Vee | Vee | Vee |
Size of table | 11 x 15 x 12 | 280 x 382 x 306 | 14 x20.½ x 14 | 357 x 52 x 357 | 15 x 16 x 24.½ | 388 x 408 x 624 |
T-slots | ½ | 12 | 44324 | 32-½ | 44324 | 15 |
Vertical & Horizantal Traverse | 14 x 48 | 357 x 452 | 14.½ x 32 | 368 x 816 | 15 x 32 | 382 x 796 |
Overall dimension | 52 x 42 x 60 | 1326 x 1061 x 1530 | 78 X 48 X 55 | 1989 X 1224 X 561 | 86 X 60 X 55 | 2193 X 1530 X 1402 |
Specification of Vice | 8.1/2x21/4x16.1/2 | 215x58x420 | 9.1/2x2.1/2x22 | 242x64x561 | 9.1/2x2.1/2x22 | 242x64x561 |
Weight approximate | 1010 Kgs. | 1650 Kgs. | - | 2250 Kgs. | - | |
H.P. Require | 2 H.P. | 3 H.P. | - | 5 H.P | - |
We specialize in production of Milling Head, which is used for the shaping of metal and other solid materials. Our Mini Mill Head is a huge hit among our clients because of its unique design and small size. The Milling Cylinder Heads, manufactured by us, are made from high quality raw materials, which ensure strength and supreme performance of the machine. We are reckoned as one of the topnotch Cylinder Head Milling Machine Manufacturers in Batal, India.
Features:
Technical Specification
Model | 3 kw | 5 kw | 7.5 kw | 10 kw | 15 kw |
---|---|---|---|---|---|
Spindle Taper | ISO-40 | ISO-40 | ISO-50 | ISO-50 | ISO-50 |
Taper Speeds | 6 No. | 9 No. | 9 No. | 9 No. | 12 No. |
Speeds Range | 70 to 400 rpm | 57 to 365 rpm | 45 to 300 rpm | 45 to 340 | 45 to 370 |
Quil Travel | 100 mm | 100 mm | 130 mm | 130 mm | 150 mm |
Spindle Dia. | 80 mm | 85 mm | 100 mm | 120 mm | 150 mm |
Head Swivel | ±45º | ±45º | ±45º | ±45º | ±45º |
We are specialized in offering international quality Geared Lathe Machines, which are widely demanded. The Geared Center Lathe Machines, are available with a rigid and box section type extra double walled configuration. Our Geared Head Lathe Machines are provided with hardened & ground steel gears, which are mounted on precision spline shafts and offer smooth and excellent performance. They are further equipped with wide bed to provide maximum torsional stiffness. We offer these machines in different models to meet the requirements of different Such unbeatable features coupled with unmatched quality make us the best Geared Head Lathe Machine Exporter from India.
Features:
Technical Specification
Specifications | KRS-25C/100td> | KRS-25C/150 | KRS-25C/200 |
---|---|---|---|
Center Height | 250 mm | 250 mm | 250 mm |
Width of Bed | 325 mm | 325 mm | 325 mm |
Admit between Centers | 1000 mm | 1500 mm | 2000 mm |
Spindle Bore | 53 mm | 53 mm | 53 mm |
No. of Spindle Speeds | 8 | 8 | 8 |
Range of Spindle | 42 - 1000 | 45 - 1000 | 45 - 1000 |
Range of Threads | 2-56 TPI 0.5-14 mm 0.125-3.5 Module | 2-56 TPI 0.5-14 mm 0.125-3.5 Module | 2-56 TPI 0.5-14 mm 0.125-3.5 Module |
Main Drive Motor | 3 H.P. | 5 H.P | 5 H.P |
Technical Specification
Width of Bed | 44" | 36" | 50" |
---|---|---|---|
Height of Center | 40" | 32" | 46" |
Spindle Hollow | 4-1/8" | 4-1/8" | 4-1/8" |
Total Width of Gap | 24" | 24" | 24" |
Swing in Gap Dia | 100" | 82" | 112" |
Admit Between Center | 186" | 144" | 258" |
Maximum Swing Outer Carriage | 64" | 50" | 76" |