Write a Review
Our Products
We offer a complete product range of Pressed Sweivel Coupler, Forged Put Log Coupler, Forged Grave Lock Coupler (beam Coupler) Swivel, Joint Pin Coupler and Forged Half Coupler
Suitable to fit tube of 48.3 mm Weight : 1.080 kg Bolts : EN-8Boron Steel As BS-1139 Section 2.2 Qualified Test of Distortion : 14.8 KN Qualified Test of Slip : 12.4 KN
| Weight | 1.080 kg |
|---|---|
| Bolts | EN-8/Boron Steel As BS-1139 Section 2.2 |
| Qualified Test of Distortion | 14.8 KN |
| Qualified Test of Slip | 12.4 KN |
Drop Forged with Boron Steel Bolts. Used for connection of Putlogs and transoms to ledgers. Zinc Plated. Suitable to fit tube of 48.3 mm Weight : 0.800 kg Bolts : EN-8Boron Steel As BS-1139 Section 2.2 Qualified Test of Slip : 12.4 KN
Drop Forged with Boron Steel Eye Bolt, Zinc Plated. There are often requirements to fasten scaffolding tubes to girder and other steel sections and it demands a specialized fitting with a high degree of versatility. The Gravlock Coupler has been specifically designed for attachment to either horizontal or vertical Flanges. In erection the Gravlock Coupler is highly effective as it enables the fitting to be bolted to the girder first. This leaves both hands free to present and secure the tube. As the tube is not compressed against the girder it is not distorted by the fastening process. Gravlock Coupler must be used in pair.
Made of Sheet Metal With Boron Steel Bolt, Zinc Plated. Used for internal connection of two stubs end to end. Suitable to fit tube of 48.3 mm Weight : 0.750 kg Bolts : EN-8Boron Steel As BS-1139 Section 2.2
| Weight | 0.750 kg |
|---|---|
| Bolts | EN-8/Boron Steel As BS-1139 Section 2.2 |
Forged Half Coupler Drop Forged with Boron Steel Bolts. A versatile range of Half Couplers for a wide variety of applications requiring the clamping of Single Tube.
Pressed Half Coupler Made of sheet metal with Boron Steel Bolt, Zinc Plated. A versatile range of half couplers for a wide variety of applications requiring the clamping of single tubes.
Fencing Coupler Suitable to fit tube of 48.3 mm Bolts : EN-8Boron Steel As BS-1139 Section 2.2 Made of Sheet Metal With Boron Steel Bolt, Zinc Plated. Used for clamping of two standard S-Fold tubes in parallel.
Used for connection of Putlogs and transoms to ledgers. Zinc Plated. Suitable to fit tube of 48.3 mm Weight : 0.800 kg Bolts : EN-8Boron Steel As BS-1139 Section 2.2 Qualified Test of Slip : 12.4 KN
Karan Gupta (New Pensla Industries)
Preet Nagar, Sodal Road, Industrial Area, Jalandhar, Punjab - 144004
Share us via
