gauge classification : standard chamber, large chamber or weld pad gauge glass : tempered borosilicate (local klinger / maxos) in 30mm width as standard. cushion : caf gasket : caf, ptfe , grofoil body (liquid chamber) : ms, cs (en-8), astm a-105, ss304, ss316 or pp cover plate : ms, cs (en-8), astm a-105, ss304, ss316 or pp bolts / nuts : ms or graded alloy steel for high temperature service. cc distance : 1915mm for straight through / 1875mm for hook up in single length. Extended ranges through a coupler. gauge connection : straight through / hook - up. process connection (pc) : flanged to bs, asa, ansi or din / screwed to bsp or npt. orientation (pc) : top / bottom : left, right, rear, vertical isolating valves : integral offset needle valves / inline ball / globe valve. vent : plug drain : plug / needle / ball / globe valve calibrated scale : al/ ss linearly calibrated for level values in mm (lc=10mm) special features : autoball check, frost free, internal heating / cooling

specifications : gauge : heavy walled borosilicate glass tube with 16mm od for regular liquids and 25mm od for viscous liquids. packing : ptfe glands : ci or ss316 end blocks : ms, ss304, ss316 or pp with or without isolating offset needle valves. guards : ms c-channels or tie-rods. process conn . : " or 1" flanged or screwed to various standards. vent / drain : " threaded plugs or " plug x needle valve (metallic) or " plug x ball valve (pp) calibrated scale : anodized al.(lc=10mm) cc dist. (r) : 3000mm. (max.) in single length. Extended range through couplers. visibility : r-150mm. maximum temp . : 200c (pp blocks : 90c). test pressure : 10kg/cm at amb.temp. (pp blocks : 2 kg/cm2)

specifications : gauge classification : standard chamber, large chamber or weld pad gauge glass : tempered borosilicate (local, klinger / maxos) in 30mm width as standard. cushion : caf gasket : caf, ptfe body (liquid chamber) : ms, cs (en-8), astm a-105, ss304, ss316 or pp cover plate : ms, cs (en-8), astm a-105, ss304, ss316 or pp bolts / nuts : ms or grated alloy steel for high temperature service. cc distance : 1915mm for straight through / 1875mm for hook up in single length. Extended ranges through a coupler. gauge connection : straight through / hook - up. process connection (pc) : flanged to bs, asa, ansi or din / screwed to bsp or npt. orientation (pc) : top / bottom : left, right, rear, vertical isolating valves : integral offset needle valve / inline ball / globe valve. vent : plug drain : plug / needle / ball / globe valve calibrated scale : al/ ss linearly calibrated for level values in mm (lc=10mm)

SPECIFICATIONS : Installation : Normally side / top for special applications Switching enclosure : Cast aluminium, weatherproof to IP 56 / IP 65 Conduit connection : Brass, " ET / " NPT Float : SS304 / SS316 / PP / PTFE Coated Min. Sp. gravity : 0.6 depending upon float material and dimensions. Process Connection : Flanged Switch Element : Micro Switch (max-temp - 150C and 250C) Switching Capacity : 5 Amp. 230V AC. Switching differential : Fixed or adjustable in steps from 10 to 300mm depending upon float, trim length, cam positioning. Repeatability : 1 mm Load / Insulation : Resistive / 150 mega ohms at 500 V DC Max temp : Upto 250C and high temp. model upto 350C Max Pressure : Upto 20kg/cm2 at ambient temperature Finish : Regular / Sanitary

SPECIFICATIONS : Installation : Side / Top Range (CC Dist) : Max. 5000mm (Bi-colour rotating flappers) Level Indication : a) Bi-coloured Rotating Flappers - 250C (White & Red) c) Bi-coloured Rotating Flappers - 400C (Silver & Golden) Fitted externally to the float chamber Float Chamber : 60 mm in SS304 / SS316 / PP Float : 50mm in SS316 Titanium/ PP (for side mtd) & 100mm is SS316 / PP (for top Mtd) Calibrated Scale : Black Anodized Aluminum / SS ( LC=10mm) Isolation Valves : 20 NB Ball / Globe Valves Vent x Drain : Threaded Plugs / Valves Process Conn . : 15NB / 50 NB (Side mtd) & 100 NB (top mtd) flanges to ASA (BS / DIN std/ ANSI ) Max. Temp . : 80C (PP) / 400C (Metallic) Max. Test Pressure (at amb. temp.) : 5 kg/cm2 (PP) /50 kg/cm2 (Metallic) Min. Liquid Sp.Gr . : 0.6 (Lower Sp. Gravity on demand)