Our Product / Services
It is a LiFePO4 battery (lithium iron phosphate), so its internal technology has all the advantages inherent in the latest generation lithium batteries. The Nexus 4.8kWh lithium battery is of high energy density and light weight compared to other batteries in the market with similar technical characteristics. Its internal technology enjoys a long service life even when its usual use of deep cycles. It is a battery with a fast charge capacity compared to other batteries of a similar range, so waiting times are minimized. The Nexus 4.8kWh lithium battery has an integrated battery management system (BMS) that by controlling the temperature, voltage, etc. guarantees both the safety of the accumulator and the integrity of the other connected elements, optimizing Battery operation at all times. The battery has RS485 ports to make connections in parallel and thus increase the capacity of the system, in particular up to 8 batteries can be connected in parallel, one of them being the master and the other 7 slaves. The front of the battery incorporates an LED light that indicates the percentage of remaining energy autonomy. The Nexus 4.8kWh battery has a low self-discharge rate and no memory effect. This battery does not emit gases during operation or at rest, which allows you to install the battery inside the home if you wish. Since it is a lithium battery, it does not require maintenance or periodic control of its internal levels.
Solar Air Conditioners are the new solar cooling technology which is not only energy efficient but also cost effective particularly in homes, it is the only way to keep your electricity costs down without sacrificing your comfort. Solar AC is a system that uses the power of Sun to assist a high efficiency compressor to reduce energy use. As we know the now a days AC is the only main appliance that consumes high power thus the Solar PV needs a special attention
Solar technology is transforming the way we use energy across industries as well as at homes. However, new users may find it challenging to understand the nitty-gritty of solar technology-based devices, and a solar inverter is no exception. While there is a wide range of solar power-based inverters available in the market. As the name suggests, a hybrid solar inverter combines two or more systems. It combines a solar power system with abattery-based inverterto form a single setup.
Confused? Dont be. In simple words, an inverter is one of the key components of a solar power system that converts direct current (DC) produced by the solar panels into alternating current (AC) for home-based appliances. Asolar panel setupwith a conventional inverter requires a separate inverter to transform AC to DC, back and forth. . Some people give hybrid inverter a shot to understand their battery requirements for the future.
Rating :3KVA/48V
Battery Capacity :48v- DC LI-ION
Output :230v ac
PV :80V -230V DC
Mains :170 V- 270V AC, 1PH, 50HZ
Max Panel Support : 3000watt
Max Power :2.4KW
Nexus manufacturers, distributes & retails the most efficient, robust & durable range of Solar Panels starting from 3W and upto 410W. we offer the best in class efficiency high efficiency polycrystalline & monocrystalline solar panels. Our Solar Modules comply with all MNRE, IEC & guidelines and can be used for government projects as well. Made with ultra-light weight & robust aluminum frame and toughened glass. Its built can withstand extreme weather conditions. The Wattage & Voltage of the solar panel decides its use and deployment which may be for OFF Grid or ON Grid usage. This particular model is a set of single unit of 48V, 410Wp Monocrystalline Solar Panel which is the largest solar module currently available commercially that is popularly used for recharging 48V batteries used in inverters, for running 48V battery chargers etc and for ON Grid & Off Grid Solar Plant Installations of medium to large size.
This is a multi-function inverter, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in a single package. The comprehensive LCD display offers user-configurable and easy-accessible button operations such as battery charging current, AC or solar charging priority, and acceptable input voltage based on different applications.
Features
Basic System Architecture
The following illustration shows basic application for this unit. It also required the following devices to have a complete running system:
Consult with your system integrator for other possible system architectures depending on your requirements.
This inverter can power various appliances in home or office environment, including motor-type appliances such as tube light, fan, refrigerator and air conditioners.
Additional Information:
Delivery Time : 5-6
interest in renewable energy has increased over the past few years due to solar power becoming more cost effective and eco-friendly. this is a solar inverter which allows power to be switched from the dc power.
obtained from solar panels to the ac power needed to control the pump. with the renewable solar inverter, pumps can adapt to solar power sources rather than traditional electrical supplies or generators.
this solar inverter is built-in with mppt solar charger to maximize solar power. besides, it is easy to install with low maintenance cost. it is easy to install with low maintenance cost. it became an eco-friendly solution for the rural areas where grid power is expensive and unreliable.
besides, this inverter also accepts single-phase ac input. it allows the inverter to automatically switch between pv power and ac utility to guarantee water pump operation during night time.
features
basic system architecture
this solar inverter is specially designed to power water pump. the following illustration show basic application for this inverter. it also includes pv modules and remote float switches to have a complete running system.
product overview
This Hybrid PV Inverter can provide power to connected loads by utilizing PV Power, Utility power and batterypower. Dependingon different power situations, this hybrid inverter is designed to generate continuous power from PV solar modules (solar panels), battery, and the utility. When MPP input voltage of PV modules is within acceptable range (see specification for the details), this inverter is able to generate power to feed the grid (utility) and charge battery. This inverter is only compatible with PV module types of single crystalline and poly crystalline. Do not connect any PV array types other than these two types of PV modules to the inverter. Do not connect the positive or negative terminal of the solar panel to the ground. See Figure 1 for a simple diagram of a typical solar system with this hybrid inverter.
Note: By following the EEG standard, every inverter sold to German area is not allowed to charge battery from Utility. The relevant function is automatically disabled by the software.
Packing List
Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. You should have received the following items inside of package:
This is a multi-function inverter, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in a single package. The comprehensive LCD display offers user-configurable and easy-accessible button operations such as battery charging current, AC or solar charging priority, and acceptable input voltage based on different applications.
Features
Basic System Architecture
The following illustration shows basic application for this unit. It also required the following devices to have a complete running system:
Consult with your system integrator for other possible system architectures depending on your requirements.
This inverter can power various appliances in home or office environment, including motor-type appliances such as tube light, fan, refrigerator and air conditioners.
Product Overview