NICE NEOTECH MEDICAL SYST...

The nice 3010 H Infant incubator is built to Embody precision, reliability and convenienceMicro-processor controlled with simultaneous display of Skin, Air and Set TemperaturesThermistor based Temperature Sensor for accurate temperature measurementMemory Backup restores set temperature and control mode automatically, in the event of power failure. It helps to reduce the attention failure of usersThe centrifugal blower operation ensures intake of fresh air for the infant, and minimizes the CO2 level inside the hood, alwaysThe withdrawable Mattress tray gives unimpeded access to the new bornThe Electrical Adjustment of working height ensures convenient care of the new bornThe unit has a servo controlled Humidity feature and integrated O2 Flow MeterThe baby bed is tiltable at both sides, Head up and down, with externally operated Trendelenburg and Fowlers positionThe elbow operated ports allows easy access and eliminates cross infectionsInclude Built-in Observation Light, IV Stand and Monitor ShelfOptional Features: Servo Control Oxygen and Built-in Weighing Scale

The nice 3010 Infant incubator is built to Embody precision, reliability and convenienceMicro-processor controlled with simultaneous display of Skin, Air and Set TemperaturesThermistor based Temperature Sensor for accurate temperature measurementMemory Backup restores set temperature and control mode automatically, in the event of power failure. It helps to reduce the attention failure of usersThe centrifugal blower operation ensures intake of fresh air for the infant, and minimizes the CO2 level inside the hood, alwaysThe withdrawable Mattress tray gives unimpeded access to the new bornThe unit has a servo controlled Humidity feature and integrated O2 Flow MeterThe baby bed is tiltable at both sides, Head up and down, with externally operated Trendelenburg and Fowlers positionThe elbow operated ports allows easy access and eliminates cross infectionsInclude Built-in Observation Light, IV Stand and Monitor ShelfOptional Features: Servo Control Oxygen and Built-in Weighing Scale

The nice 3030 Infant incubator is built to Embody precision, reliability and convenienceMicro-processor controlled with simultaneous display of Skin, Air and Set TemperaturesThermistor based Temperature Sensor for accurate temperature measurementMemory Backup restores set temperature and control mode automatically, in the event of power failure. It helps to reduce the attention failure of usersThe centrifugal blower operation ensures intake fresh air for the infant, and minimizes the CO2 level inside the hood, alwaysThe unit has a built-in Humidity Chamber (Conventional)The baby bed is tiltable at both sides for Trendelenburg and Fowlers positionThe elbow operated ports allows easy access and eliminates cross infectionsInclude Built-in IV Stand

Microprocessor Controlled System with Servo Air and Servo Skin Modes of operation.Displays Air / Skin Temperature simultaneously with Set temperatureFeather Touch operation with large digital display and comprehensive alarmsMemory backup to restore set temperature and control mode automatically in the event of power failureAn integral and withdrawable Mattress tray to aid resuscitation during transport Internal battery Backup for 4 hours minimum. Operates both on AC and DC currents, with visual indication for battery power status and power sourcesCollapsible stainless steel trolley with shock absorbersDual Thermistor Temperature Probes, with accuracy of +0.2C, to minimize down time and ensure accuracy. Probe interchangeable without calibrationA, 2D (or) 2E tank mounting facility to mount gas cylindersUnimpeded access to the patient with frontal access and a minimum of 2 access ports and three elbow operated portsEasy to clean and disinfectHigh Intensity LED light for observationComprehensive alarms: Air Temp. Low / High, Skin Temp. Low / High, Sensor Failure, Low Battery, Heater Failure, Power Failure, Air Flow Failure, Temperature > 39 CAutomatic Heater cut off if air / skin temperature inside the incubator exceeds 39 CAccessories: Auxiliary Tray for placing additional equipmentOptional Accessories: Pressure Regulator, Flow meter, O2 Cylinder, O2 Driven Venturi Slow suction.

A Micro-processor controlled Infant Radiant Warmer with Resuscitator unit.Five Mode of Operation Servo Skin, Servo Air, Safe, Pre-warm and Manual.Feather Touch operation with large digital display and comprehensive alarmsThermistor based Temperature Sensor for accurate temperature measurementInfant Radiant Warmer uses i-sense technology that detects the detachment of skin probe and decreases the temperature gradually to protect the baby from HyperthermiaMemory Backup restores set temperature and control mode automatically, in the event of power failure. It helps to reduce the attention failure of usersThe baby bed is tiltable at both sides for Trendelenburg and Fowlers position.Easily removable and Unbreakable Aluminium hinge with acrylic side panels to clean for subsequent usages.The Heater Module easily pivots 90 degrees in either direction to facilitate other procedures such as X-rays without disturbing the babyProvides optimal resuscitation with safe and controlled Peak inspiratory pressure (PIP) and a consistent and precise PEEPOptional Features: Built-in Weighing Scale, Electrical Height Adjustment

A Micro-processor controlled Infant radiant warmer with Phototherapy. Five Mode of Operation Servo Skin, Servo Air, Safe, Pre-warm and Manual. Built-in High power blue LED Phototherapy for the treatment of Hyperbilirubinemia Feather Touch operation with large digital display and comprehensive alarms Thermistor based Temperature Sensor for accurate temperature measurement Infant Radiant Warmer uses i-sense technology that detects the detachment of skin probe and decreases the temperature gradually to protect the baby from Hyperthermia Memory Backup restores set temperature and control mode automatically, in the event of power failure. It helps to reduce the attention failure of users The baby bed is tiltable at both sides for Trendelenburg and Fowler’s position. Easily removable and Unbreakable Aluminium hinge with acrylic side panels to clean for subsequent usages. The Heater Module easily pivots 90 degrees in either direction to facilitate other procedures such as X-rays without disturbing the baby Optional Features: Built-in Weighing Scale, Electrical Height Adjust.

A Micro-processor controlled Infant warming system with Resuscitation & Phototherapy.Five Mode of Operation Servo Skin, Servo Air, Safe, Pre-warm and Manual.Feather Touch operation with large digital display and comprehensive alarmsBuilt-in High power blue LED Phototherapy for the treatment of HyperbilirubinemiaThermistor based Temperature Sensor for accurate temperature measurementi-sense technology detects the detachment of skin probe and decreases the temperature gradually to protect the baby from HyperthermiaMemory Backup restores set temperature and control mode automatically, in the event of power failure. It helps to reduce the attention failure of usersThe baby bed is tiltable at both sides for Trendelenburg and Fowlers position.Easily removable and Unbreakable Aluminium hinge with acrylic side panels to clean for subsequent usages.The Heater Module easily pivots 90 degrees in either direction to facilitate other procedures such as X-rays without disturbing the babyProvides optimal resuscitation with safe and controlled Peak inspiratory pressure (PIP) and a consistent and precise PEEPOptional Features: Built-in Weighing Scale, Electrical Height Adjustment

A Micro-processor controlled Infant warming system Four Mode of Operation Servo Skin, Safe, Pre-warm and Manual Feather Touch operation with large digital display and comprehensive alarms Thermistor based Temperature Sensor for accurate temperature measurement i-sense technology detects the detachment of skin probe and decreases the temperature gradually to protect the baby from Hyperthermia Quartz/Ceramic/Calrod (tubular) heater with parabolic reflector to provide heat uniformly in the entire bed Memory Backup restores set temperature and control mode automatically, in the event of power failure. It helps to reduce the attention failure of users APGAR Timer available up to 1-59 minutes LED/Halogen observation lamp to facilitate the Doctor/Physician to observe the baby during treatment The baby bed is jerk free and tiltable at both sides for Trendelenburg and Fowler’s position Easily removable and Unbreakable hinge with acrylic/polycarbonate (PC) side panels to clean for subsequent usages The Heater Module easily pivots 90 degrees in either direction to facilitate other procedures such as X-rays without disturbing the baby – Heater can be cutoff during pivoting (optional feature) Integral spike protector (MOV) with step-down transformer and linear voltage regulator for voltage stabilization Inbuilt Cabinet facility to store the records Thermally sealed mattress to prevent flow of liquids inside the mattress Optional Features – Electrical Height Adjustment, In-Built Weighing Scale, Oxygen cylinder mounting provision, Flow meter, X-ray cassette tray, Manual angular adjustment of observation lamp, Rechargeable battery backup

A Micro-processor controlled Infant warming system Four Mode of Operation Servo Skin, Safe, Pre-warm and Manual Feather Touch operation with large digital display and comprehensive alarms Thermistor based Temperature Sensor for accurate temperature measurement i-sense technology detects the detachment of skin probe and decreases the temperature gradually to protect the baby from Hyperthermia Quartz/Ceramic/Calrod (tubular) heater with parabolic reflector to provide heat uniformly in the entire bed Memory Backup restores set temperature and control mode automatically, in the event of power failure. It helps to reduce the attention failure of users APGAR Timer available up to 1-59 minutes LED/Halogen observation lamp to facilitate the Doctor/Physician to observe the baby during treatment The baby bed is tiltable at both sides for Trendelenburg and Fowler’s position Easily removable and Unbreakable hinge with acrylic/polycarbonate (PC) side panels to clean for subsequent usages The Heater Module easily pivots 90 degrees in either direction to facilitate other procedures such as X-rays without disturbing the baby – Heater can be cutoff during pivoting (optional feature) In-built storage tray facility to store the records Optional Features – Electrical Height Adjustment, In-Built Weighing Scale, Oxygen cylinder mounting provision, Flow meter, X-ray cassette tray, Manual angular adjustment of observation lamp

A Micro-processor controlled Infant warming systemFour Mode of Operation Servo Skin, Safe, Pre-warm and ManualFeather Touch operation with large digital display and comprehensive alarmsThermistor based Temperature Sensor for accurate temperature measurementi-sense technology detects the detachment of skin probe and decreases the temperature gradually to protect the baby from HyperthermiaQuartz/Ceramic/Calrod (tubular) heater with parabolic reflector to provide heat uniformly in the entire bedMemory Backup restores set temperature and control mode automatically, in the event of power failure. It helps to reduce the attention failure of usersAPGAR Timer available up to 1-59 minutesLED/Halogen observation lamp to facilitate the Doctor/Physician to observe the baby during treatmentHeight adjustment option for different heights of baby cradles / trolleys / bassinetThe Heater Module easily pivots 90 degrees in either direction to facilitate other procedures such as X-rays without disturbing the baby Heater can be cutoff during pivoting (optional feature)

A Micro-processor controlled Infant warming systemThree Mode of Operation Servo Skin, Pre-warm and ManualFeather Touch operation with large digital display and comprehensive alarmsQuartz/Ceramic/Calrod (tubular) heater with parabolic reflector to provide heat uniformly in the entire bedThermistor based Temperature Sensor for accurate temperature measurementi-sense technology detects the detachment of skin probe and decreases the temperature gradually to protect the baby from HyperthermiaMemory Backup restores set temperature and control mode automatically, in the event of power failure. It helps to reduce the attention failure of usersAPGAR Timer available up to 1-59 minutesLED/Halogen observation lamp to facilitate the Doctor/Physician to observe the baby during treatment.The baby bed is tiltable at both sides for Trendelenburg and Fowlers positionEasily removable and Unbreakable hinge with acrylic/polycarbonate (PC) side panels to clean for subsequent usagesThe Heater Module easily pivots 90 degrees in either direction to facilitate other procedures such as X-rays without disturbing the baby Heater can be cutoff during pivoting (optional feature)In-built storage tray facility to store the recordsOptional Features Electrical Height Adjustment, In-Built Weighing Scale, Oxygen cylinder mounting provision, Flow meter, X-ray cassette tray, Manual angular adjustment of observation lamp, Thermally sealed baby mattress

A Micro-processor controlled Infant warming system Three Mode of Operation Servo Skin, Pre-warm and Manual Feather Touch operation with large digital display and comprehensive alarms Thermistor based Temperature Sensor for accurate temperature measurement i-sense technology detects the detachment of skin probe and decreases the temperature gradually to protect the baby from Hyperthermia Memory Backup restores set temperature and control mode automatically, in the event of power failure. It helps to reduce the attention failure of users APGAR Timer available up to 1-59 minutes The baby bed is tiltable at both sides for Trendelenburg and Fowler’s position Easily removable and Unbreakable hinge with acrylic side panels to clean for subsequent usages The Heater Module easily pivots 90 degrees in either direction to facilitate other procedures such as X-rays without disturbing the baby Under surface Phototherapy for treatment of Hyperbilirubinemia In-built storage tray facility to store the records Optional Features – Electrical Height Adjustment, In-Built Weighing Scale, Oxygen cylinder mounting provision, Flow meter, X-ray cassette tray

A Micro-processor controlled Infant warming system.Three Mode of Operation Servo Skin, pre-warm and Manual.Feather Touch operation with large digital display and comprehensive alarmsThermistor based Temperature Sensor for accurate temperature measurementi-sense technology detects the detachment of skin probe and decreases the temperature gradually to protect the baby from HyperthermiaMemory Backup restores set temperature and control mode automatically, in the event of power failure. It helps to reduce the attention failure of usersAPGAR Timer available up to 1-59 minutesThe Heater Module easily pivots 90 degrees in either direction to facilitate other procedures such as X-rays without disturbing the baby

A Micro-processor controlled Infant warming system Three Mode of Operation Servo Skin, Pre-warm and Manual Feather Touch operation with large digital display and comprehensive alarms Thermistor based Temperature Sensor for accurate temperature measurement i-sense technology detects the detachment of skin probe and decreases the temperature gradually to protect the baby from Hyperthermia Memory Backup restores set temperature and control mode automatically, in the event of power failure. It helps to reduce the attention failure of users APGAR Timer available up to 1-59 minutes The baby bed is tiltable at both sides for Trendelenburg and Fowler’s position Easily removable and Unbreakable hinge with acrylic side panels to clean for subsequent usages The Heater Module easily pivots 45 degrees in one direction to facilitate other procedures such as X-rays without disturbing the baby In-built storage tray facility to store the records Optional Features – Electrical Height Adjustment, In-Built Weighing Scale, Oxygen cylinder mounting provision, Flow meter, X-ray cassette tray

24 High power Blue LED provides to cover the bed area and for effective Phototherapy treatment3 White LED Light for observing the patient during treatmentNo infrared rays ensures minimize the water lossAdjustable Height Conveniently allows you to control irradiance levels on the neonate and different types of cradle.Convenient Tilting of Source Unit, Height Adjustment with Single hand and Castor with elegant manoeuvring helps to place the system at different positions, at user convenience.Treatment Timer ensures auto cut-off when elapsing the set timeLamp usage hour monitor, Lamp replacement alert ensures the less downtime service.Lamp usages hours greater than 20, 000 hours ensures no need of frequent change of lamp.NOTE: LEDs performance can withstand the lifetime for more than 1, 00, 000 hours

9 High power Blue LED provides to cover the bed area and for effective Phototherapy treatment4 White LED Light for observing the patient during treatmentNo infrared rays ensures minimize the water lossAdjustable Height Conveniently allows you to control irradiance levels on the neonate and different types of cradle Can be adjusted to maximum of up to 190cm from the surfaceConvenient Tilting of Source Unit, Height Adjustment with Single hand and Castor with elegant manoeuvring helps to place the system at different positions, at user convenience.Undersurface phototherapy can be used under this phototherapy unitTreatment Timer ensures auto cut-off when elapsing the set timeLamp usage hour monitor, Lamp replacement alert ensures the less downtime service.Lamp usages hours greater than 20, 000 hours ensures no need of frequent change of lamp.NOTE: LEDs performance can withstand the lifetime for more than 1, 00, 000 hours

9 High power Blue LED provides to cover the bed area and for effective Phototherapy treatment3 White LED Light for observing the patient during treatmentNo infrared rays ensures minimize the water lossAdjustable Height Conveniently allows you to control irradiance levels on the neonate and different types of cradle.Convenient Tilting of Source Unit, Height Adjustment with Single hand and Castor with elegant manoeuvring helps to place the system at different positions, at user convenience.Treatment Timer ensures auto cut-off when elapsing the set timeLamp usage hour monitor, Lamp replacement alert ensures the less downtime service.Lamp usages hours greater than 20, 000 hours ensures no need of frequent change of lamp.Strong aluminium stand ensures more support and hold during movement

Undersurface Light source module with trolley24 High power Blue LED provides to cover the bed area and for effective Phototherapy treatment3 White LED Light for observing the patient during treatmentNo infrared rays ensures minimize the water lossTreatment Timer ensures auto cut-off when elapsing the set timeLamp usage hour monitor, Lamp replacement alert ensures the less downtime service.Lamp usages hours greater than 20, 000 hours ensures no need of frequent change of lamp.Transparent acrylic tray ensures no restriction of treatment light to the patientTransparent side panels ensures visibility of baby from long distanceTiltable trolleys at both sides: Trendelenburg and fowler position

Bubble CPAP also known as Neonatal CPAP, is a unique bubble generating system that provides consistent and accurate delivery of CPAP to neonatal patients.Active mechanical Air oxygen blender FiO2 could be varied from 21% to 100%Highly calibrated blender ensures accurate % of oxygen delivered.LED indicator to display the level of PEEP set to deliver CPAP to neonatal patients.High PEEP alarm and Low PEEP alarm for indication of PEEP levels.Low Air / Oxygen alarm indications for indication of low input pressure.Power failure alarm to alert the user or clinician.Preset pressure manifold that releases the additional pressure ensures accurate delivery of the set pressure and safety to the patient.Bubble generator with PEEP probe provides PEEP of 3 cmH2O to 10 cmH2O.Bubble generator provides a convenient means to apply positive airway pressure, freeing the clinician to focus on patient care, not the device.Overflow container in the bubble generator collects excess water which provides more time for the treatment by not letting the device to stop for collection of excess water.Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient.Invasive and Non-invasive mode of operation supports neonatal patients based on their requirements and comfort.Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces the work of breathing.Strong Aluminium stand with dovetail grooving for easy fixing of humidifier and accessoriesDisposable / Reusable heater wire circuits ensures the delivery of heated breathing gas to the patient.Different types of patient interfaces like CPAP Nasal prongs, Nasal mask, Nasal T bar prongs & Nasal cannula are available to support the patient based upon their convenient and comfort.

Unique bubble generating system provides consistent and accurate delivery of CPAP to the patient.Active mechanical Air oxygen blender FiO2 could be varied from 21% to 100%Highly calibrated blender ensures accurate % of oxygen delivered.LED indicator to display the level of PEEP set to deliver to patient.High PEEP alarm and Low PEEP alarm for indication of PEEP levels.Low Air / Oxygen alarm indications for indication of low input pressure.Power failure alarm to alert the user or clinician.Preset pressure manifold that releases the additional pressure ensures accurate delivery of the set pressure and safety to the patient.Bubble generator with PEEP probe provides PEEP of 3 cmH2O to 10 cmH2O.Bubble generator provides a convenient means to apply positive airway pressure, freeing the clinician to focus on patient care, not the device.Overflow container in the bubble generator collects excess water which provides more time for the treatment by not letting the device to stop for collection of excess water.Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient.Invasive and Non-invasive mode of operation supports the patient based on their requirements and comfort.Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces thework of breathing.Strong SS stand with dovetail grooving for easy fixing of humidifier and accessories.Disposable / Reusable heater wire circuits ensures the delivery of heated breathing gas to the patient.Different types of patient interfaces like Nasal prongs, Nasal mask, Nasal T bar prongs & Nasal cannula are available to support the patient based upon their convenient and comfort.

Unique bubble generating system provides consistent and accurate delivery of CPAP to the patient.Air and Oxygen flowmeters that ensures the delivery of mixed gas to the patient.Preset pressure manifold that releases the additional pressure ensures accurate delivery of the set pressure and safety to the patient.Bubble generator with PEEP probe provides PEEP of 3 cmH2O to 10 cmH2O.Bubble generator provides a convenient means to apply positive airway pressure, freeing the clinician to focus on patient care, not the device.Overflow container in the bubble generator collects excess water which provides more time for the treatment by not letting the device to stop for collection of excess water.Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient.Invasive and Non-invasive mode of operation supports the patient based on their requirements and comfort.Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces thework of breathing.Strong SS stand with dovetail grooving for easy fixing of humidifier and accessoriesDisposable / Reusable heater wire circuits ensures the delivery of heated breathing gas to the patient.Different types of patient interfaces like Nasal prongs, Nasal mask, Nasal T bar prongs & Nasal cannula are available to support the patient based upon their convenient and comfort.

Infant Resuscitator will safely inflate the babys lungs and provide optimum oxygenation by delivering consistent PIP with each breath avoiding the risks associated with under or over inflation at uncontrolled pressures.Accept and deliver oxygen concentrations from 21% to 100% coming from a flow meter or a blender.Disposable t-piece patient circuit with PEEP knob ensures proper setting of PEEP based on the patients requirement.The patient T-Piece can connect to neonatal masks or endotracheal tubes.Helps to establish and maintain Functional Residual Capacity (FRC) by providing a consistent PEEP throughout the resuscitation process.An accurate manometer provides constant reassurance of mask seal and deliver PIP and PEEP.Consistent PEEP can be delivered to assist with breathing during transport or ventilator circuit change.Small in Size, Less Weight and innovative technology incorporated into a compact design.Different size of face mask which provides flexible in usage for different babies.

Fibre Optic Neonatal Transilluminator device provides high intensity LED light for finding artery easily and aids in the diagnosis of pneumothorax.Flexibility ensures that it does not make heat interference during the procedure.Intensity can be varied according to the required application which helps in easy identification of conditions such as hydrocephalus or examining veins.A long, flexible, fibre optic cable allows effortless positioning during use.Optical cable lock secures the fibre optic cable intact.The microcontroller protects the light source to optimize usage hours and provides failure alarms for sensor and cooling fan.With technology getting advanced, we have made the device simple and easy to use with one touch operation.Since its small in size and has less weight, this innovative technology is incorporated into a compact design.Optional features: Roll stand for easy mobility

Battery operated handheld compact design makes it easily portable.Fibre Optic Neonatal Transilluminator provides high intensity LED light for finding artery easily and aids in the diagnosis of pneumothorax.Flexibility ensures that it does not make heat interference during the procedure.Intensity can be varied according to the required application which helps in easy identification of conditions such as hydrocephalus or examining veins.A long, flexible, fibre optic cable allows effortless positioning during use.Optical cable lock secures the fibre optic cable intact.The microcontroller protects the light source to optimize usage hours and provides failure alarms for sensor and cooling fan.With technology getting advanced, we have made the device simple and easy to use with one touch operation

Fibre optic bundle with High intensity blue LED cold light ensures faster breakdown of higher bilirubin levels in baby.Wider area of pad ensures more effective therapy.Flexible and soft pad ensures comfort to both baby and mother during feeding of baby.Intensity can be varied according to the required dosage levels.Flexibility of fibre optic cable ensures that it does not make heat interference during the procedure.Optical cable lock secures the fibre optic cable intact.The microcontroller protects the light source to optimize usage hours and provides failure alarms for sensor and cooling fan.With technology getting advanced, we have made the device simple and easy to use with one touch operation.Since its small in size and has less weight, this innovative technology is incorporated into a compact design.Optional features: Roll stand for easy mobility.

Transparent side panels ensures the visibility of the baby from long distance.Detachable and unbreakable hinge fixed to the side panels helps to sterilize easily.The bed can be tilted on both sides for Trendelenburg and Fowlers position.Soft baby mattress for the comfort of the infant.Strong lockable castors for easy movement and lock in same position.Storage tray for placing records.

Translucent bassinet for the placement of the infant.Fixed bed holds the baby gently in position.Soft baby mattress for the comfort of the baby.Strong lockable castors for easy movement and lock in same position.Utility tray for storage purposes.Optional features: IV stand, Observation light.

Sturdy, Transparent acrylic and removable panel makes it easy to clean.Tare facility enables to measure the actual weight of the baby.5 gram accuracy for exact measurement of infants weight.Hold function records the previous value.Unit conversion from Gram to Pounds and vice-versa.Procedure mode eases the weight measurement procedure.

Sleek design gives more comfort to the baby during weight measurement.Tare facility enables to measure the actual weight of the baby.5 gram accuracy for exact measurement of infants weight.Hold function records the previous value.Unit conversion from Gram to Pounds and vice-versa.Procedure mode eases the weight measurement procedure.

Length dimension in 0-1000 mm.Graduation given in mm/cm/inch for measurements.Lockable foot piece.1 mm resolution with Head support and movable leg support.Can be folded and carried anywhere

Oxygen hood made of transparent acrylic for easy visibility.Neck port adjustment to minimize the wastage of oxygen.Two side ports for easy access during procedures.Oxygen inlet port and temperature port is available for easy access.Available in three sizes: Neonates, Infant and Pediatric

Oxygen hood made of single mould polycarbonate material for easy visibility.Silicon flaps are attached to minimize the wastage of oxygen.Oxygen inlet port and temperature port is available for easy access.Available in two sizes: Small and Medium.

Oxygen Monitor offers exceptional flexibility and reliability with large high bright LED displayDeveloped using state-of-the-art design and the latest manufacturing techniquesAccurate oxygen sensor enables easy calibration procedureThe microprocessor based Oxygen Monitor offer a range of unique standard features that set these models apart from the competitionLow Power draw allows the units to operate continuously for 20 hours in the rechargeable battery.Audio and Visual indications for Low battery alarm, Sensor Fail alarm, Calibration error alarm.Oxygen sensor providing superior long-term stability and accuracy.Constructed from high impact resistant materials, these rugged instruments provide unparalleled performance under the harshest conditionsIdeally suited for use in Neonatology, Respiratory care, and Anaesthesia applications.

Detects the cessation of breathing (apnea) in infants who are at risk of respiratory failure and alert the parent or attendant to the condition.The microprocessor based Respiration MonitorGives an audible & visual warning if the infant stops breathing for more than the selected apnea interval time.Simple and reliable Operation to give complete reassurance to the user.Developed using state-of-the-art design and the latest manufacturing techniques.Low Power draw allows the units to operate continuously for 20 hours in the rechargeable battery.Re-chargeable battery with long life up to 2 years.Choice of 10, 15 & 20 Seconds apnea delay.

Measures therapeutic blue light intensity in W/cm & W/cm/nm.High bright LED display with 0.1 % resolution.Provides consistent reading of the irradiance measurement.Hold function records the previous value.Low Power draw allows the units to operate continuously for 20 hours in the rechargeable battery.Re-chargeable battery with long life up to 2 years.

Oil-free compressed medical air for respiratory care devices.Medical air quality as ISO 8573 complied.Quite operation makes it comfortable for bed side use.Output connector as per ISO NIST fitting. (DISS fitting is also available)One touch operation for easy handling by users.Gas output flow of up to 50-60 psiDouble stage air intake filter for more purity of air.Water drain filters ensures there is no water in the output gas.Separate container for collection of waters filtered.LCD display for Total runtime hours and current running hours.Audio and visual indications for Power failure, low voltage and low input pressure.Compact and sturdy design makes it easier for transport.

Respiratory Humidifier is designed for use in hospital environment wherever medical gas is being supplied to patients.nice 8050 Respiratory humidifier (Medical Humidifier) incorporates latest technology that provides Physiological level of humidity at body temperature.The nice 8050 advanced microprocessor controls & delivers precise, reliable performance in humidifying the respiratory medical gas before delivered to the patient and ensures 0% water condensation in any breathing circuit.Capable of operating in either invasive or non-invasive control mode with flow detection.The nice 8050 features dual servo control feedback humidifier system incorporates to constant monitoring and control chamber and proximal temperatures in the airway line. As a result high temperature gases cannot exist anywhere in the system.When use a heated wire breathing system from nice 8050, ventilated gas continues to warm during delivery. Rain-out and waste are reduced, while the need for circuit change is minimized.Comprehensive audible & visual alarm constantly protects against potential problems. The nice 8050 will alert at variations of set limit temperature Vs actual.Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces the work of breathing.The design of nice 8050 Servo Humidifier makes it the ideal humidification system for Adult Ventilator, Infant Ventilator, NCPAP, Bubble CPAP, Infant Resuscitator and High Flow Oxygen Therapy for Adult, Pediatric & Neonatal care for both invasive and non-invasive application.The servo controlled Humidifier accommodates both high and low flow ventilation therapies, as well as heated and non-heated wire breathing system.

Designed for use in hospital environment wherever medical gas is being supplied to patients.nice 8010 Respiratory humidifier incorporates latest technology that provides Physiological level of humidity at body temperature.The nice 8010 advanced microprocessor controls & delivers precise, reliable performance in humidifying the respiratory gas before delivered to the patient and ensures 0% water condensation in any breathing circuit.Capable of operating in non-invasive control mode at high, medium and low setting.When use a heated wire breathing system from nice 8010, ventilated gas continues to warm during delivery. Rain-out and waste are reduced, while the need for circuit change is minimized.Comprehensive audible & visual alarm constantly protects against potential problems. The nice 8010 will alert at variations of set limit temperature Vs actual.Optimal humidity of greater than 12 mg/l promotes mucociliary clearance and reduces the work of breathing.The design of nice 8010 makes it the ideal humidification system for Adult Ventilator, Infant Ventilator, NCPAP, Bubble CPAP, Infant Resuscitator and High Flow Oxygen Therapy for Adult, Paediatric & Neonatal care for non-invasive application.The nice 8010 accommodates both high and low flow ventilation therapies, as well as heated and non-heated wire breathing system.An advanced microprocessor controller assures the control of the system. The system responds immediately to any change in settings, and constant self-diagnostic verify proper operation every second of use.

nice 5005 Low flow air oxygen blender provides the mixed gas of up to 30 LPM.nice 5005 combine compressed Medical Air and Oxygen to deliver blended pressurized gas at a precise oxygen concentration (FiO2) when set by the user.Highly accurate delivery of FiO2 with knob adjustment from 21 to 100%Ideal for equipment requiring 2-30 LPM.Non-interchangeable input port for air and oxygen.Primary and auxiliary flow meter provisions provided.Bleed ON/OFF functions ensures more accuracy during low output flow.Highly audible pneumatic alarm when input pressure differentiates between 202 psi.Rigid aluminium body and highly precise mechanical components ensures the accurate mixture of input gases.Easy calibration makes it simple for end users.These blenders are suitable for respiratory applications including routine therapy, ventilator gas supply, Bubble CPAP, SiPAP, Resuscitator and critically-limited NICU procedures.Optional features: Input gas pressure regulators, Input gas filters and customized fittings for flow meters

nice 5010 Air oxygen blender or mixer provides the mixed gas of up to 120 LPM.nice 5010 combine compressed Medical Air and Oxygen (O2) to deliver blended pressurized gas at a precise oxygen concentration (FiO2) when set by the user.Highly accurate delivery of FiO2 with knob adjustment from 21 to 100%Ideal for equipment requiring 2-120 LPM.Non-interchangeable input port for air and oxygen.Primary and auxiliary flow meter provisions provided.Bleed ON/OFF functions ensures more accuracy during low output flow.Highly audible pneumatic alarm when input pressure differentiates between 202 psi.Rigid aluminium body and highly precise mechanical components ensures the accurate mixture of input gases.Easy calibration makes it simple for end users.Blender is suitable for respiratory applications including routine therapy, ventilator gas supply, Bubble CPAP, SiPAP, High flow oxygen therapy, Resuscitator and critically-limited NICU procedures.Optional features of Air O2 blender/mixer include: Input gas pressure regulators, Input gas filters and customized fittings for flow meter for Air O2 blender and Air O2 blender with flow meter (cascaded).

nice 5005 air oxygen blender with 11 LPM cascade flow meter provides the mixed gas of up to 11 LPM.Cascaded flow meters of 1 LPM and 10 LPM makes it easier to adjust and provide minutely accurate output pressures to the patient.nice 5005 combine compressed Medical Air and Oxygen to deliver blended pressurized gas at a precise oxygen concentration (FiO2) when set by the user.Highly accurate delivery of FiO2 with knob adjustment from 21 to 100%Ideal for equipment requiring less than 11 LPM.Non-interchangeable input port for air and oxygen.Highly audible pneumatic alarm when input pressure differentiates between 202 psi.Rigid aluminium body and highly precise mechanical components ensures the accurate mixture of input gases.Easy calibration makes it simple for end users.These blenders are suitable for respiratory applications including routine therapy, ventilator gas supply, Bubble CPAP, SiPAP, Resuscitator and critically-limited NICU procedures.Optional features: Input gas pressure regulators, Input gas filters and customized flow meters.

nice 5010 air oxygen blender with 60 LPM cascade flow meter provides the mixed gas of up to 60 LPM.Mostly used for High flow oxygen therapy requiring patients.Cascaded flow meters of two 30 LPM makes it easier to adjust and provide minutely accurate output pressures to the patient.nice 5010 combine compressed Medical Air and Oxygen to deliver blended pressurized gas at a precise oxygen concentration (FiO2) when set by the user.Highly accurate delivery of FiO2 with knob adjustment from 21 to 100%Ideal for equipment requiring less than 60 LPM.Non-interchangeable input port for air and oxygen.Highly audible pneumatic alarm when input pressure differentiates between 202 psi.Rigid aluminium body and highly precise mechanical components ensures the accurate mixture of input gases.Easy calibration makes it simple for end users.These blenders are suitable for respiratory applications including routine therapy, ventilator gas supply, Bubble CPAP, SiPAP, High flow oxygen therapy, Resuscitator and critically-limited NICU procedures.Optional features: Input gas pressure regulators, Input gas filters and customized flow meters.

Bubble CPAP also known as Neonatal CPAP, is a unique bubble generating system that provides consistent and accurate delivery of CPAP to neonatal patients.Active mechanical Air oxygen blender FiO2 could be varied from 21% to 100%Highly calibrated blender ensures accurate % of oxygen delivered.LED indicator to display the level of PEEP set to deliver CPAP to neonatal patients.High PEEP alarm and Low PEEP alarm for indication of PEEP levels.Low Air / Oxygen alarm indications for indication of low input pressure.Power failure alarm to alert the user or clinician.Preset pressure manifold that releases the additional pressure ensures accurate delivery of the set pressure and safety to the patient.Bubble generator with PEEP probe provides PEEP of 3 cmH2O to 10 cmH2O.Bubble generator provides a convenient means to apply positive airway pressure, freeing the clinician to focus on patient care, not the device.Overflow container in the bubble generator collects excess water which provides more time for the treatment by not letting the device to stop for collection of excess water.Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient.Invasive and Non-invasive mode of operation supports neonatal patients based on their requirements and comfort.Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces the work of breathing.Strong Aluminium stand with dovetail grooving for easy fixing of humidifier and accessoriesDisposable / Reusable heater wire circuits ensures the delivery of heated breathing gas to the patient.Different types of patient interfaces like CPAP Nasal prongs, Nasal mask, Nasal T bar prongs & Nasal cannula are available to support the patient based upon their convenient and comfort.

Unique bubble generating system provides consistent and accurate delivery of CPAP to the patient.Active mechanical Air oxygen blender FiO2 could be varied from 21% to 100%Highly calibrated blender ensures accurate % of oxygen delivered.LED indicator to display the level of PEEP set to deliver to patient.High PEEP alarm and Low PEEP alarm for indication of PEEP levels.Low Air / Oxygen alarm indications for indication of low input pressure.Power failure alarm to alert the user or clinician.Preset pressure manifold that releases the additional pressure ensures accurate delivery of the set pressure and safety to the patient.Bubble generator with PEEP probe provides PEEP of 3 cmH2O to 10 cmH2O.Bubble generator provides a convenient means to apply positive airway pressure, freeing the clinician to focus on patient care, not the device.Overflow container in the bubble generator collects excess water which provides more time for the treatment by not letting the device to stop for collection of excess water.Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient.Invasive and Non-invasive mode of operation supports the patient based on their requirements and comfort.Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces thework of breathing.

Unique bubble generating system provides consistent and accurate delivery of CPAP to the patient.Active mechanical Air oxygen blender fio2 could be varied from 21% to 100%Highly calibrated blender ensures accurate % of oxygen delivered.Preset pressure manifold that releases the additional pressure ensures accurate delivery of the set pressure and safety to the patient.Bubble generator with PEEP probe provides PEEP of 3 cmH2O to 10 cmH2O.Bubble generator provides a convenient means to apply positive airway pressure, freeing the clinician to focus on patient care, not the device.Overflow container in the bubble generator collects excess water which provides more time for the treatment by not letting the device to stop for collection of excess water.Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient.Invasive and Non-invasive mode of operation supports the patient based on their requirements and comfort.Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces thework of breathing.Strong SS stand with dovetail grooving for easy fixing of humidifier and accessoriesDisposable / Reusable heater wire circuits ensures the delivery of heated breathing gas to the patient.

Unique bubble generating system provides consistent and accurate delivery of CPAP to the patient.Air and Oxygen flowmeters that ensures the delivery of mixed gas to the patient.Preset pressure manifold that releases the additional pressure ensures accurate delivery of the set pressure and safety to the patient.Bubble generator with PEEP probe provides PEEP of 3 cmH2O to 10 cmH2O.Bubble generator provides a convenient means to apply positive airway pressure, freeing the clinician to focus on patient care, not the device.Overflow container in the bubble generator collects excess water which provides more time for the treatment by not letting the device to stop for collection of excess water.Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient.Invasive and Non-invasive mode of operation supports the patient based on their requirements and comfort.Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces thework of breathing.

Infant Resuscitator will safely inflate the babys lungs and provide optimum oxygenation by delivering consistent PIP with each breath avoiding the risks associated with under or over inflation at uncontrolled pressures.Accept and deliver oxygen concentrations from 21% to 100% coming from a flow meter or a blender.Disposable t-piece patient circuit with PEEP knob ensures proper setting of PEEP based on the patients requirement.The patient T-Piece can connect to neonatal masks or endotracheal tubes.Helps to establish and maintain Functional Residual Capacity (FRC) by providing a consistent PEEP throughout the resuscitation process.An accurate manometer provides constant reassurance of mask seal and deliver PIP and PEEP.Consistent PEEP can be delivered to assist with breathing during transport or ventilator circuit change.Small in Size, Less Weight and innovative technology incorporated into a compact design.Different size of face mask which provides flexible in usage for different babies.

Infant Resuscitator will safely inflate the babys lungs and provide optimum oxygenation by delivering consistent PIP with each breath avoiding the risks associated with under or over inflation at uncontrolled pressures.Disposable t-piece patient circuit with PEEP knob ensures proper setting of PEEP based on the patients requirement.The patient T-Piece can connect to neonatal masks or endotracheal tubes.Helps to establish and maintain Functional Residual Capacity (FRC) by providing a consistent PEEP throughout the resuscitation process.An accurate manometer provides constant reassurance of mask seal and deliver PIP and PEEP.Consistent PEEP can be delivered to assist with breathing during transport or ventilator circuit change.Active mechanical Air oxygen blender FiO2 could be varied from 21% to 100%Highly calibrated blender ensures accurate % of oxygen delivered.Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient.Invasive and Non-invasive mode of operation supports the patient based on their requirements and comfort.Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces thework of breathing.

Oxygen Monitor offers exceptional flexibility and reliability with large high bright LED displayDeveloped using state-of-the-art design and the latest manufacturing techniquesAccurate oxygen sensor enables easy calibration procedureThe microprocessor based Oxygen Monitor offer a range of unique standard features that set these models apart from the competitionLow Power draw allows the units to operate continuously for 20 hours in the rechargeable battery.Audio and Visual indications for Low battery alarm, Sensor Fail alarm, Calibration error alarm.Oxygen sensor providing superior long-term stability and accuracy.Constructed from high impact resistant materials, these rugged instruments provide unparalleled performance under the harshest conditionsIdeally suited for use in Neonatology, Respiratory care, and Anaesthesia applications.

Detects the cessation of breathing (apnea) in infants who are at risk of respiratory failure and alert the parent or attendant to the condition.The microprocessor based Respiration MonitorGives an audible & visual warning if the infant stops breathing for more than the selected apnea interval time.Simple and reliable Operation to give complete reassurance to the user.Developed using state-of-the-art design and the latest manufacturing techniques.Low Power draw allows the units to operate continuously for 20 hours in the rechargeable battery.Re-chargeable battery with long life up to 2 years.Choice of 10, 15 & 20 Seconds apnea delay.

High-flow oxygen therapy or HFNC oxygen therapy is non-invasive respiratory support that delivers warmed, humidified, oxygen-enriched air to patients.Cascaded flowmeters of 60 LPM or 90 LPM is used for therapy.Conjugated with High flow therapy nasal cannula (HFNC) to provide more accurate and comfort in supply of high flow of oxygen.High flow breathing circuits ensures no resistance to the supplied gas to the patient.Active mechanical Air oxygen blender fio2 could be varied from 21% to 100%Highly calibrated blender ensures accurate % of oxygen delivered.Preset pressure manifold that releases the additional pressure ensures accurate delivery of the set pressure and safety to the patient.Servo controlled Humidifier with flow detection sensor provides humidity to the delivered gas of patient.Invasive mode of operation supports the patient based on their requirements and comfort.Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces thework of breathing.Strong SS stand with dovetail grooving for easy fixing of humidifier and accessoriesNasal Cannula available for Adult, Pediatrics, Infant, Neonatal and Premature babies.

Corrugated design ensures non-kinking operation and smooth airflow for patient safety.Lighter weight design to ensure the connectors do not detach bearing higher weights.Spiral heater wire technology in the inspiratory limb increases the heating surface area in the circuit for superior condensate control and allows for delivery of optimal humidity to patients.Flow resistance, compliance and leakage conform to ISO 5367 for breathing circuits and ISO 5356 for connectors.Provided with flexible and rigid connectors for fixing with humidification chamber.12 mm output connector enabling the fixation of flow tube.Separate ports for temperature probe fixation at chamber and patient end for measuring temperature inside circuit.Tubing clips for better organization of tubing and prevent distortion of tubing.Biocompatible for breathing gas pathway and contact with patient ensures to reduce the risk of contamination, leaching and irritation.Single patient use, up to 7 days application.

Corrugated design ensures non-kinking operation and smooth airflow for patient safety.Lighter weight design to ensure the connectors do not detach bearing higher weights.Spiral heater wire technology in the inspiratory limb increases the heating surface area in the circuit for superior condensate control and allows for delivery of optimal humidity to patients.Flow resistance, compliance and leakage conform to ISO 5367 for breathing circuits and ISO 5356 for connectors.Provided with flexible and rigid connectors for fixing with humidification chamber.This model comprises disposable humidification chamber of 360 ml compressed volume for infant / neonatal patients.12 mm output connector enabling the fixation of flow tube.Separate ports for temperature probe fixation at chamber and patient end for measuring temperature inside circuit.Tubing clips for better organization of tubing and prevent distortion of tubing.Biocompatible for breathing gas pathway and contact with patient ensures to reduce the risk of contamination, leaching and irritation.Single patient use, up to 7 days application.

Corrugated design ensures non-kinking operation and smooth airflow for patient safety.Lighter weight design to ensure the connectors do not detach bearing higher weights.Spiral heater wire technology in the inspiratory limb increases the heating surface area in the circuit for superior condensate control and allows for delivery of optimal humidity to patients.Flow resistance, compliance and leakage conform to ISO 5367 for breathing circuits and ISO 5356 for connectors.Provided with flexible and rigid connectors for fixing with humidification chamber.12 mm output connector with L-type connector for fixation of T bar prong.Separate ports for temperature probe fixation at chamber and patient end for measuring temperature inside circuit.Tubing clips for better organization of tubing and prevent distortion of tubing.Biocompatible for breathing gas pathway and contact with patient ensures to reduce the risk of contamination, leaching and irritation.Single patient use, up to 7 days application.

360 ml compressed volume for infant / neonatal patients.Medical grade rigid polysulfon material ensures to withstand higher temperatures of hot water and multiple use.Aluminium base plate ensures to transfer and hold the heat inside the chamber.Removable aluminium base plate with O-ring easy to clean and multiple use.Optimal guided flow circulation within the chamber.Lower water level needed and larger heater contact surface to reduce required heating time.Standard complied 22mm male port for inlet and outlet gas hose connectors.Isolated water inlet port makes it easy to refill water and minimizes the work load of removing chamber frequently.Float seal mechanism to prevent the overflow of water from the chamber.Highly legible water line in chamber makes it easily visible from all angles.Flow resistance, compliance and leakage conform to ISO 5356 for connectors.Designed to withstand sterilization process enabling contamination free multiple use.Biocompatible for breathing gas pathway ensures to reduce the risk of contamination and leaching.

720 ml compressed volume for Pediatric / Adult patients.Medical grade rigid polysulfon material ensures to withstand higher temperatures of hot water and multiple use.Aluminium base plate ensures to transfer and hold the heat inside the chamber.Removable aluminium base plate with O-ring easy to clean and multiple use.Optimal guided flow circulation within the chamber.Lower water level needed and larger heater contact surface to reduce required heating time.Standard complied 22mm male port for inlet and outlet gas hose connectors.Isolated water inlet port makes it easy to refill water and minimizes the work load of removing chamber frequently.Float seal mechanism to prevent the overflow of water from the chamber.Highly legible water line in chamber makes it easily visible from all angles.Flow resistance, compliance and leakage conform to ISO 5356 for connectors.Designed to withstand sterilization process enabling contamination free multiple use.Biocompatible for breathing gas pathway ensures to reduce the risk of contamination and leaching.

360 ml compressed volume for infant / neonatal patients.Rigid polycarbonate material ensures to withstand higher temperatures of hot water.Aluminium base plate ensures to transfer and hold the heat inside the chamber.Water inlet port with tubing and auto feed with single float mechanism.Float seal mechanism to prevent the overflow of water from the chamber.Standard complied 22mm male port for inlet and outlet gas hose connectors.Highly legible water line in chamber makes it easily visible from all angles.

720 ml compressed volume for Pediatric / Adult patients.Rigid polycarbonate material ensures to withstand higher temperatures of hot water.Aluminium base plate ensures to transfer and hold the heat inside the chamber.Water inlet port with tubing and auto feed with single float mechanism.Float seal mechanism to prevent the overflow of water from the chamber.Standard complied 22mm male port for inlet and outlet gas hose connectors.Highly legible water line in chamber makes it easily visible from all angles.

Flexible gas tube made of SS coil spring and medical grade polyolefin tube.Non-kinkable design ensures no resistance to gas flow and maximum flow to the patient.Soft and smooth end cannula provides more comfort to the patient during treatment.Contoured cannula design to fit the patient nares.Hook and loop design wang pad for fixing the cannula to cheek and prevent distortion of tubes.Skin friendly adhesive for cannula cheekpad ensures no damage to patient skin.Bio-compatible material ensures irritation free contact with patients skin for long time.ISO 5356 complied connector at the start of input supply line with 12M & 15M special fit conical male connector.Tube guider to adjust the tube to head size that ensures there is no unwanted movement of tubes at the patients back of head.Available in four sizes for Pediatrics, Infant, Neonatal and Premature babies.Colour coded to differentiate four sizes.

Flexible gas tube made of SS coil spring and medical grade polyolefin tube.Non-kinkable design ensures no resistance to gas flow and maximum flow to the patient.Soft and smooth end cannula provides more comfort to the patient during treatment.Contoured cannula design to fit the patient nares.Hook and loop design wang pad for fixing the cannula to cheek and prevent distortion of tubes.Skin friendly adhesive for cannula cheekpad ensures no damage to patient skin.Bio-compatible material ensures irritation free contact with patients skin for long time.Specially designed connector to fit all 15 F connectors.ISO 5356 complied connector at the start of input supply line.Tube guider to adjust the tube to head size that ensures there is no unwanted movement of tubes at the patients back of head.Available in four sizes for Pediatrics, Infant, Neonatal and Premature babies.Colour coded to differentiate four sizes.

Flexible corrugated hose with non-kinkable design ensures no resistance to gas flow and maximum flow to the patient.Soft and smooth end cannula provides more comfort to the patient during treatment.Contoured cannula design to fit the patient nares.Adjustable headstrap to lock the cannula at the patients head size and prevent distortion of tubes.Skin friendly cheekpad ensures no damage to patient skin.Broad cheekpad provides patient more comfort when wearing for longer time.Bio-compatible material ensures irritation free contact with patients skin for long time.ISO 5356 complied connector at the start of input supply line with 22F conical male connector.Headstrap clip to keep the headstrap and tube intact and prevents from unwanted movement.Available in three sizes: small, medium and large.

Used to low surfactant growth baby to deliver breathing gas.Made of biocompatible silicon material ensures irritation free contact with patients skin for long timeIt is compatible with flow tube.Soft, smooth contact with the skin provides more comfort to the patient during treatment.It anatomically shape with tight contact to avoid leakage.Two slots / three slots for fixing with head bonnet.Available in four different nares sizes to cover entire nasal area: Small, Medium, Large, X Large

Respiratory patient interface compatible for use with flow tube.Made of biocompatible silicon material ensures irritation free contact with patients skin for long time.Soft, smooth contact with the skin provides more comfort to the patient during treatment.Contoured design to fit specifically with patient nares.Two slots / three slots for fixing with head bonnet.Available in seven different sizes based on patients nares size: Micro, Small, Medium, Medium Wide, Large , large wide and X Large.

Respiratory patient interface used with L connectors attached to breathing circuit.Made of biocompatible silicon material ensures irritation free contact with patients skin for long time.Soft, smooth contact with the skin provides more comfort to the patient during treatment.Contoured design to fit specifically with patient nares.ISO 5356 complied for end connector.Available in five different sizes based on patients nares size: Size 0, Size 1, Size 2, Size 3 and Size 4.

Respiratory patient interface compatible for use with ventilator circuits having 15F connector.Made of biocompatible silicon material ensures irritation free contact with patients skin for long time.Soft, smooth contact with the skin provides more comfort to the patient during treatment.Contoured design to fit specifically with patient nares.ISO 5356 complied for end connector.Available in three different sizes based on patients nares size: Small, Medium and Large.

7 mm ID corrugated tube to avoid dead spaceLow flow resistance of the gas delivered.Made of flexible, soft and biocompatible material.10 mm adaptor easy to fix with breathing circuit.Inspiratory and expiratory pressure are separated using mini flow divider.The divider is pivotable and angle can be adjusted at 2 positive anglesCompatible to fix with Patient Interface like Nasal prongs and Nasal masks.Soft cushioned fixing pillow to support the weight of flow tube over the patients head.

Used in conjugation with patient interfaces like nasal prongs & nasal mask for fixing with head.Head open side is designed for using ultra sound probe and patient without any disturbance while using CPAP.Available in eight different size based on patients head size:XX Small- 17 to 19 cm, Large 25.5 to 28 cm, X Small- 19 to 21 cm, X Large -28 to 30 cm, Small 21 to 23 cm, XX Large 30 to 33 cm, Medium 23 to 25.5 cm, XXX Large 33 to 36 cm. Hookable lace for looping and attaching the patient interface with head bonnet.

Tape to measure the head circumference and nasal size of the baby to select appropriate head bonnet and patient interfaces.Appropriate head size is classified into various colors of the bonnet.7 different nares size chart for 7 different sized nasal prongs.

T-piece connector to connect to resuscitation mask or endotracheal tube.Designed with PEEP control knob at the T-piece connector for adjustment of PEEP level based on patients requirementCorrugated design ensures non-kinking operation and smooth airflow for patient safety.Lighter weight design to ensure the connectors do not detach bearing higher weights.Flow resistance, compliance and leakage conform to ISO 5367 for breathing circuits and ISO 5356 for connectors.Biocompatible for breathing gas pathway and contact with patient ensures to reduce the risk of contamination, leaching and irritation.Single patient use.

T-piece connector to connect to resuscitation mask or endotracheal tube.Designed with PEEP control knob at the T-piece connector for adjustment of PEEP level based on patients requirementCorrugated design ensures non-kinking operation and smooth airflow for patient safety.Lighter weight design to ensure the connectors do not detach bearing higher weights.Spiral heater wire technology in the inspiratory limb increases the heating surface area in the circuit for superior condensate control and allows for delivery of optimal humidity to patients.Flow resistance, compliance and leakage conform to ISO 5367 for breathing circuits and ISO 5356 for connectors.Biocompatible for breathing gas pathway and contact with patient ensures to reduce the risk of contamination, leaching and irritation.Single patient use.

Conjugated with Resuscitators for non-spontaneously breathing patient to restore spontaneous breathing.Compatible to fit with 15mm T-piece or Y-type connector.Soft, smooth contact with the skin provides more comfort to the patient during treatment.It anatomically shape to fit the patients nasal and mouth with tight contact to avoid leakage.Made of biocompatible silicon material ensures irritation free contact with patients skin for long time.Available in three different nares sizes: Size 00, Size 0 & Size 1

Simulate level of resistance and lung compliance and provide consistent accuracy.Can be used prior to placing a breathing circuit on a patient to ensure patient safety.Can also be used for demonstration and training.Test Lung- 25 ml Test lung Volume- 25ml15mm connector port as per ISO standardFlexible silicon bellowTest Lung- 50 ml Test lung Volume- 50ml15mm connector port as per ISO standardFlexible silicon bellow Test Lung- 1000 ml Test lung Volume- 1000ml15mm connector port as per ISO standardNitrile Inner Rubber

Elastic strap is provided to fix on baby head.Zero % ultraviolet and blue light penetration.Soft, smooth contact with the skin provides more comfort to the patient during treatmentBiocompatible material ensures the baby is free from skin and ocular irritationAvailable in three different sizes: Small, Medium, Large

Y Shaped Eye pad prevents light and provide comfort to baby without damaging eyesZero % ultraviolet and blue light penetrationSoft, smooth contact with the skin provides more comfort to the patient during treatmentLoop and hook design to ensure the pad do not dislocate from babys eye.Biocompatible material ensures the baby is free from skin and ocular irritationAvailable in three different sizes: Small, Medium, Large

Highly accurate sensor with accuracy of 0.2 CStainless Steel 316 implantable grade sensor tip with broad surface.Long length cable to reach the infant from the warmer and incubator.Easy to plug in/out male connector.Biocompatible material ensures the baby is free from skin and ocular irritationProbe is disposable after single use.

Used to measure the respiration rate of baby suffering from respiratory failure.Baby respiration sensor is used with nice 5050 Respiration monitor.Disposable Pneumatic sensor capsule is taped to the babys abdomenAccurate in monitoring.The non-kink plastic tubing is non-electricalIt does not restrict the babys movement.The performance is not impaired when covered by the babys clothes

Medical grade silicone material for tubing and polysulfon material for connectors to ensure the reusing of breathing circuit.Corrugated design ensures non-kinking operation and smooth airflow for patient safety.Lighter weight design to ensure the connectors do not detach bearing higher weights.Spiral heater wire technology in the inspiratory limb increases the heating surface area in the circuit for superior condensate control and allows for delivery of optimal humidity to patients.Flow resistance, compliance and leakage conform to ISO 5367 for breathing circuits and ISO 5356 for connectors.Provided with flexible and rigid connectors for fixing with humidification chamber.Output connector enables easy fixation of patient interfaces.Separate ports for temperature probe fixation at chamber and patient end for measuring temperature inside circuit.Designed to withstand sterilization process enabling contamination free multiple use.Biocompatible for breathing gas pathway and contact with patient ensures to reduce the risk of contamination, leaching and irritation

The external insulator is made up of silicon and inner Teflon wire to withstand high temperature.Provided with rigid T adaptor for fixing with breathing circuit and humidification.Heater wire with 2 pin electroplated socket to ensure more safety when used with humidifier.Conjugated with reusable breathing circuits for multiple use.Designed to withstand sterilization process enabling contamination free multiple use.Biocompatible for breathing gas pathway ensures to reduce the risk of contamination and leaching.

Negative pressure to absorb or suction the mucous from the lungs of the patient.Helps keeping airway clear by removing mucus from the lungs.Suction pressure is indicated in negative pressure gauge.Bottle has white level mark that indicates the suction level.Suction hose is given along with the bottle.The hose is made of polyolefin given with tight fittings.The hose is compatible to be used by any pin.Instructions are inscribed on the bottle about usage.

Rigid bottle with a firm base made of Thermoplastic elastomer.Bottle has white level mark that indicates the suction level.Suction hose is given along with the bottle.Bottle is compatible to withstand high temperature.The hose is made of polyolefin given with tight fittings.The hose is compatible to withstand high temperature.Instructions are inscribed on the bottle about usage.

Pressure can be regulated up to 150 kg/cm2.Used during Bubble CPAP treatment.Pneumatic filter provided to remove unwanted irritants during treatment.Available for both Air and Oxygen pressure.Non-interchangeable connectors for Air and Oxygen regulators.