Our Products
CMS – N2 Basic Property
PSA Property (Example)
PSA Control Condition
Remark - The above data of N2 Generation volume is measured under the following condition:
1 m3 of CMS is operated in 1 unit of PSA (=2 Adsorption towers)
All the data described above mean the basic property of CMS, but do not mean our guaranteed figures.
Additional Information:
Payment Terms : T/T
Packaging Details : 75 kg drum
Delivery Time : Immediate
Details
N2 Purity % | N2 Production Nm3/m3 h | N2/Air % |
---|---|---|
99.99 | 54 | 21 |
99.95 | 79 | 29 |
99.9 | 94 | 32 |
99.5 | 139 | 40 |
99 | 169 | 44 |
Ceramic Bed Support Balls were introduced for the Chemical / Petrochemical Industries. The application of Ceramic Bed Support Balls is necessary where the ball inertness, high chemical purity and thermal and mechanical shock resistance are important like thermal reservoirs, as a Bed Support Media in Ethanol Manufacturing Plants, supporting beds in catalytic and other petroleum refining and petrochemicals plant application, and over burden to prevent gas or liquid streams from carrying away desiccant / adsorbents.
Noble Ceramic Bed Support Balls are suitable as a catalyst reactor and desiccant bed support, or for ballast under exposure to high temperature or severe corrosive conditions. The high chemical purity and inertness of the ball minimizes the possibility of catalyst contamination and adverse side reactions. The Ceramic Bed Support Balls offer good resistance to heat shock, mechanical shock & abrasion. All sizes are carefully screened before packing; however, some chips and chipped balls may be present in all size.
Benefits / Advantages of Noble Ceramic Bed Support Balls :
Additional Information:
Payment Terms : T/T
Packaging Details : 25 kg bags
Delivery Time : Immediate
Noble Activated Carbon Granules manufactured from finest grade of coconut Shell. Due to coconut shell, activated carbon granules have very high hardness and low attrition losses. Due to high hardness, activated carbon granules are especially suitable for high pressure and large volume D.M. Plant Filters.
Noble Activated Carbon Granules are excellent in removing process impurities. Sometime Impurities are eliminated or sometime pure substances get preferentially absorbed which could be eluted. Activated Carbon Granules are useful in deodorizing and de-oiling of compressed gases, separation of rare gases, enhances the aroma of Portable alcohol, Co2 Purification, removal of oil from condensates, de-chlorination of process water, Solvent recovery, air purification, purification of water etc.
You can regenerate activated carbon granules by back washing with D.M. water and occasionally by super heated steam in (Reserve Direction) counter current direction. It increases the life of the activated carbon granules to a great extent.
Noble Activated Carbon Granules / Crystals is available in 4 x 8 Mesh & 8 x 16 Mesh.
Do contact us for Technical Data Sheet / Samples.
Additional Information:
Payment Terms : T/T
Packaging Details : 50 Kg Bags
Delivery Time : Immediate
Noble Copper Catalyst used to deoxidation of inert gas & other gas streams and also for simultaneous deoxidation and shift conversion duties. Such process streams such as endo gas from gas generator produced (formed by burning of LPG and other hydrocarbon and air in the ration of approximately 1: 20-25) has to be purified. A typical gas composition often found in such streams is as under –
The Noble Copper Catalyst can handle gas streams such as above for simultaneous removal of oxygen and conversion of CO & Co2. Any other gas stream containing above gases in varying proportions can also be handled on this catalyst.
Gas Streams containing only CO and Oxygen with No Hydrogen, the CO is converted to CO2 by oxidation. The operating temperature ranges between 150 deg. C to 250 deg. C and pressure of operation could be from few to several kg/cm2
Noble Copper Catalyst is available in 5 mm x 5 mm Tablets.
Additional Information:
Payment Terms : T/T
Packaging Details : 25 kg drum
Delivery Time : Immediate
The Noble Deoxo Catalyst combines oxygen with hydrogen (catalystically under reducing condition) to form water vapor and operates at temperature from –40 deg. C to approximately 600 deg. C. The gases treated may be hydrogen or any inert gas in which there is a quantity of hydrogen approximately 0.25 % v.v. minimum in excess of stoichiometric. Such inert gases can include Nitrogen, Argon, Helium and the other noble gases, Carbon Dioxide etc. The maximum recommended oxygen removal is 3 % per pass. The removal of gaseous impurities by chemical reaction over a catalyst is normally accompanied by the release of heat i.e. it is an exothermic reaction. Approximately 235 deg. C theoretical temperature rises for removal of 1 % v/v oxygen from Argon. Please note that although the theoretical temperature rises will provide a good guide to the Catalyst Purifier’s exit temperature, the actual temperature will depend on the heat capacities of the other gases present and the heat losses to the temperature. Noble Deoxo Catalyst is Tablets (3 mm x 3 mm) and Spheres (2 mm to 4 mm) size.
Additional Information:
Payment Terms : T/T
Packaging Details : 5 kg tin
Delivery Time : 4-6 weeks