Product / Services
Post Buy Requirement
NP
Nucon Pneumatics
Hyderabad, Telangana, India
Add Review
Call Now

Our Products

  1. 11 Products available

Our Products #4672260

Poppet Valves

Poppet Valves
  • Port size : G1/8
  • Critical pressure ratio : 0.17
  • Operating Pressure : 2 – 10 bar
  • Medium : Compressed air and oil
Features:
Manual, Mechanical and Air pilot operated
Normally closed and normally open types
Compact size
Panel mounting facility

May be used as 2/2 type

Manual and Mechanical forces quoted are at 6.3 bar
The ZNCN/666, ZS/666 and ZS/667 ranges are normally closed and normally open respectively. They are externally identical.
These valves are particularly suitable for the pilot operation of the larger control valves and their compact size enables them to be built into machines and fixtures very easily. Many of these valves can be panel mounted and can be supplied with legend plates.
These models can also be used as 2/2 valves. In this case he mains air or oil supply must be connected to the inlet port. The exhaust port should be plugged. Manual/mechanical operating forces quoted relate to mains air supply pressure of 6.3 bar.
View Complete Details
Ask Latest Price & Details
Positioner Cylinder

Positioner Cylinder
  • Electrical control : 4 to 20 mA
  • Pneumatic control : 0.2 to 1 bar
NUCON Power cylinder ZNCN/29000 series consists of a double acting cylinder, positioner (either pneumatic control / Electro pneumatic control) and suitable link mechanism.
The mountings at rod end and cap end are customized.

NUCON Power cylinder has been designed to operate as an actuator in pneumatic control system to position the actuator in accordance with the control signal.

Design Features:
Wide range of bore sizes from 32mm to 14"
Strokes up to 1500 mm.
IS0 6431 standard cylinder from 32 to 200 mm
Above 200mm with NUCON standard/customized cylinder
Wide choice of rod end and cap end mountings
Linear characteristics are standard
Special characteristics are optional
Easy reversal action
Direction of piston movement in relation to signal can be reversed by the reversing the cam and rerouting the piping
Customized versions with additional accessories are on request
Additional Features:
Manual override attachment with clutch
Air-lock valves to obtain fail safe stay put position
Volume boosters to increase stroking rate
Limit switches
Position transmitters

Gaiter for piston rod protection

Material of Construction :
Cylinder Barrel
Aluminium alloy, fine drawn, calibrated, and hard anodized up to 200 mm
Carbon-steel, finish honed and hard-chrome-plated above 200mm
Piston Rod
Stainless steel AlSl 420 up to 200 mm bore
Medium carbon steel grade En8 above 200mm
End covers
Aluminium die casting up to 200 mm bore
Cast-iron /Zinc plated Mild steel above 200 mm bore
Link mechanism
Zinc plated carbon steel
Seals
NBR (standard )
Viton (Optional on request)

Material of Construction :
The Power cylinder is a standard pneumatic cylinder whose stroke positioning is regulated by pneumatic/electro-pneumatic feed back signal. The stroke positioning is made by altering electro pneumatic control signal value (4 mA for zero stroke and 20 mA for full stroke). In between stroke is proportional to the band width of 16mA. Similarly in Pneumatic control positioning the signal of 0.2 bar for Zero stroke and 1 bar for full stroke
The Positioner and the Link mechanism are fitted on the top of the cylinder with a rigid bracket. The link mechanism is connected to the piston rod. The feed back cam moves along with the piston rod and provides the feedback signal to the positioner to position the cylinder in line with the control signal
Accessories :
All standard mountings and accessories are available to customer's choice.
View Complete Details
Ask Latest Price & Details
inline valves

Inline Valves
  • Medium : 40µ filter air
  • Operating Pressure : 1.5 to 8 bar
  • Operating Temperature : -5 to 60oC
  • Protection class : IP 65
  • Voltage range : -15% to +10%
Features:
Compact Pilot and solenoid actuated
Solenoid coils can be interchanged or rotated through 90oincrement
Suitable for multi-directional flow and dual supply application
Captive O ring seals
Light weight corrosion resistant material
Gang mounting facilitate

LED indicator type plug-in-connector

Application:
3/2 Values are used for Single Acting Cylinders operation
5/2 & 5/3 Valves are used for Double Acting Cylinders operation
View Complete Details
Ask Latest Price & Details
standard cylinder

Standard Cylinder
  • Medium Compressed air, filtered, lubricated and non-lubracted
  • Operation Double acting, adjustable cushioning
  • Operating Pressure 2-10 bar
  • Operating Temperature 0oC to +80o C
Features:
Large range of bore sizes - ideal for several industrial applications
Long established design - proven ruggedness and reliability
Extensive choice of mountings adjustable cushioning
View Complete Details
Ask Latest Price & Details
Square Barrel Cylinder

Square Barrel Cylinder
  • Medium Compressed Filtered & Lubricated Air
  • Operating Pressure 1 to 9 bar
  • Operating Temperature - 50C to + 700C
  • Operating Speed 50 - 800 mm/sec
  • End Covers Die Cast Aluminium Alloy
  • Piston Aluminium Alloy
  • Piston Rod SS 420 (Std.)
  • Piston Rod SS 304 (Optional)
Design Features:
Double Acting with Adjustable Cushioning Cylinders
Increased Cushioning Effect
Available in both Magnetic & Non-Magnetic Versions
Confirm to ISO 6431
Profile, Round & Square Barrels
Precisely Extruded, Calibrated, Hard Anodized Aluminium Barrels
High Performance, Rugged and Reliable
Stainless Steel Piston Rod
Suitable for Wide Range of Applications
Extensive Range of Mountings
End Covers are Powder Coated
View Complete Details
Ask Latest Price & Details
Heavy Duty Hydraulic Cylinder

Heavy Duty Hydraulic Cylinder
  • Medium : Compressed air, filtered, lubricated and non-lubricated
  • Operation : Double acting, adjustable cushioning
  • Operating Pressure : 2 - 17 bar (4
  • Operating Temperature : 0oC to +80oC

We are offering a wide range ofHeavy Duty Hydraulic Cylinder.

View Complete Details
Ask Latest Price & Details
Pneumatic Door Operation

Pneumatic Door Operation

A complete solution for one source of Pneumatic Door operation in which you have a competent and experienced partner with proven track record working for you . Nucon's fully automatic product range is an ideal solution which can fit to your specific application.

Nucon will design and supply the complete Operating Mechanism for Pneumatic Door and prove them to your satisfaction. The current range includes Operating Mechanisms for the Inswing Door, Out swing Door, Jack Knife Door, and the complete Retractable Foot Step.

Nucon's pneumatic doors are fitted with standard passenger safety features like Manual switch in case of Emergency and Finger protection device. Optional feature like indicating lamps and blinkers etc. are provided as per customer requirement

Nucon's products are built in state of the art manufacturing plant with ISO-9000 certification and world class technology. High quality components guarantee perfect product performance.
View Complete Details
Ask Latest Price & Details
adsorption dryers

Adsorption Dryers

ECOCLEAN compressed air filters meet the strictest quality requirements and are extremely economical to purchase, operate and maintain. The housing is made of cast aluminium, with a chromebased protective coating on the inside and outside and an additional powder coating on the outside.
Features:
  • Optimized flow, due to the curved compressed air inlet
  • Prevention of corrosion and bacteria formation
  • The filter element is fastened securely by tie-rod
  • Filter element with stainless steel cylinder for high strength
  • The filter medium is wound up to 8 times, ensuring long life and lowdifferential pressure
  • The dimensionally stable drainage layer made of needled felt prevents any deterioration in filter performance
  • Fitted with automatic condensate drain as standard
  • Easy to service and maintain, with hexagon nut flats on housing
View Complete Details
Ask Latest Price & Details
Cartridge Filters

Cartridge Filters
Activated carbon cartridges CAK and Hopcalite cartridges HCK

KSI activated carbon cartridges of series CAK are highly effective oil vapour adsorption filters. They were specially designed to adsorb oil vapours and odours in compressed air and gas streams.

Designed as a filter cartridge, each element is filled with granulated activated carbon. Large-pore metal sieves in the generous apertures ensure a low pressure difference at the inlet and outlet. High-grade filter mats trap contamination at the inlet and separate out any abrasion at the outlet.
Advantages of CAK cartridges:
Longer service life than conventional elements
Better process control
Lower residual oil content
Higher dimensional accuracy
Cost-efficient solution in comparison to oil-vapour adsorbers
Can be retrofitted in all filter housings at any time
View Complete Details
Ask Latest Price & Details
Compressed Air Filter

Compressed Air Filter
End caps of polymer material
  • No "afflorescence" and therefore no formation and accumulation of bacteria
  • No damage to the screw thread in the filter head
  • Filter remains undamaged even without greasing
Larger filter area with up to 8-fold winding
  • Depth filtration instead of surface filtration increases the available filter areaAdvantages::
  • Differential Pressure increases less rapidly
  • Greater efficiency of the element due to improved absorption
Drainage layer of needle felt
  • Does not swell as air or gas streams through, therefore no cracking
  • Needle felt does not contain any silicon
  • Can withstand temperatures up to 120 C
Spirax stainless steel cylinders
  • Internal and external supporting cylinders of stainless steel
  • Up to 40% lower pressure difference due to the special form and arrangement of the open surfaces
  • More stable than conventional perforated plates and expanded metal, therefore more reliable operation and longer duty periods
  • Alternative filter elements are available for:Alup - Atlas Copco - Beko - Boge - Compair - Deltech - Domnick Hunter - Ecoair - Hankison - Hiross - Ingersoll Rand - Kaeser - Sullair - ultrafilter - Zander
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.
Browse Our Products list of Nucon Pneumatics Hyderabad, Telangana
Product / Services
Post Buy Requirement
NP
Nucon Pneumatics
Hyderabad, Telangana, India
Add Review
Call Now

Our Products

  1. 11 Products available

Our Products #4672260

Poppet Valves

Poppet Valves
  • Port size : G1/8
  • Critical pressure ratio : 0.17
  • Operating Pressure : 2 – 10 bar
  • Medium : Compressed air and oil
Features:
Manual, Mechanical and Air pilot operated
Normally closed and normally open types
Compact size
Panel mounting facility

May be used as 2/2 type

Manual and Mechanical forces quoted are at 6.3 bar
The ZNCN/666, ZS/666 and ZS/667 ranges are normally closed and normally open respectively. They are externally identical.
These valves are particularly suitable for the pilot operation of the larger control valves and their compact size enables them to be built into machines and fixtures very easily. Many of these valves can be panel mounted and can be supplied with legend plates.
These models can also be used as 2/2 valves. In this case he mains air or oil supply must be connected to the inlet port. The exhaust port should be plugged. Manual/mechanical operating forces quoted relate to mains air supply pressure of 6.3 bar.
View Complete Details
Ask Latest Price & Details
Positioner Cylinder

Positioner Cylinder
  • Electrical control : 4 to 20 mA
  • Pneumatic control : 0.2 to 1 bar
NUCON Power cylinder ZNCN/29000 series consists of a double acting cylinder, positioner (either pneumatic control / Electro pneumatic control) and suitable link mechanism.
The mountings at rod end and cap end are customized.

NUCON Power cylinder has been designed to operate as an actuator in pneumatic control system to position the actuator in accordance with the control signal.

Design Features:
Wide range of bore sizes from 32mm to 14"
Strokes up to 1500 mm.
IS0 6431 standard cylinder from 32 to 200 mm
Above 200mm with NUCON standard/customized cylinder
Wide choice of rod end and cap end mountings
Linear characteristics are standard
Special characteristics are optional
Easy reversal action
Direction of piston movement in relation to signal can be reversed by the reversing the cam and rerouting the piping
Customized versions with additional accessories are on request
Additional Features:
Manual override attachment with clutch
Air-lock valves to obtain fail safe stay put position
Volume boosters to increase stroking rate
Limit switches
Position transmitters

Gaiter for piston rod protection

Material of Construction :
Cylinder Barrel
Aluminium alloy, fine drawn, calibrated, and hard anodized up to 200 mm
Carbon-steel, finish honed and hard-chrome-plated above 200mm
Piston Rod
Stainless steel AlSl 420 up to 200 mm bore
Medium carbon steel grade En8 above 200mm
End covers
Aluminium die casting up to 200 mm bore
Cast-iron /Zinc plated Mild steel above 200 mm bore
Link mechanism
Zinc plated carbon steel
Seals
NBR (standard )
Viton (Optional on request)

Material of Construction :
The Power cylinder is a standard pneumatic cylinder whose stroke positioning is regulated by pneumatic/electro-pneumatic feed back signal. The stroke positioning is made by altering electro pneumatic control signal value (4 mA for zero stroke and 20 mA for full stroke). In between stroke is proportional to the band width of 16mA. Similarly in Pneumatic control positioning the signal of 0.2 bar for Zero stroke and 1 bar for full stroke
The Positioner and the Link mechanism are fitted on the top of the cylinder with a rigid bracket. The link mechanism is connected to the piston rod. The feed back cam moves along with the piston rod and provides the feedback signal to the positioner to position the cylinder in line with the control signal
Accessories :
All standard mountings and accessories are available to customer's choice.
View Complete Details
Ask Latest Price & Details
inline valves

Inline Valves
  • Medium : 40µ filter air
  • Operating Pressure : 1.5 to 8 bar
  • Operating Temperature : -5 to 60oC
  • Protection class : IP 65
  • Voltage range : -15% to +10%
Features:
Compact Pilot and solenoid actuated
Solenoid coils can be interchanged or rotated through 90oincrement
Suitable for multi-directional flow and dual supply application
Captive O ring seals
Light weight corrosion resistant material
Gang mounting facilitate

LED indicator type plug-in-connector

Application:
3/2 Values are used for Single Acting Cylinders operation
5/2 & 5/3 Valves are used for Double Acting Cylinders operation
View Complete Details
Ask Latest Price & Details
standard cylinder

Standard Cylinder
  • Medium Compressed air, filtered, lubricated and non-lubracted
  • Operation Double acting, adjustable cushioning
  • Operating Pressure 2-10 bar
  • Operating Temperature 0oC to +80o C
Features:
Large range of bore sizes - ideal for several industrial applications
Long established design - proven ruggedness and reliability
Extensive choice of mountings adjustable cushioning
View Complete Details
Ask Latest Price & Details
Square Barrel Cylinder

Square Barrel Cylinder
  • Medium Compressed Filtered & Lubricated Air
  • Operating Pressure 1 to 9 bar
  • Operating Temperature - 50C to + 700C
  • Operating Speed 50 - 800 mm/sec
  • End Covers Die Cast Aluminium Alloy
  • Piston Aluminium Alloy
  • Piston Rod SS 420 (Std.)
  • Piston Rod SS 304 (Optional)
Design Features:
Double Acting with Adjustable Cushioning Cylinders
Increased Cushioning Effect
Available in both Magnetic & Non-Magnetic Versions
Confirm to ISO 6431
Profile, Round & Square Barrels
Precisely Extruded, Calibrated, Hard Anodized Aluminium Barrels
High Performance, Rugged and Reliable
Stainless Steel Piston Rod
Suitable for Wide Range of Applications
Extensive Range of Mountings
End Covers are Powder Coated
View Complete Details
Ask Latest Price & Details
Heavy Duty Hydraulic Cylinder

Heavy Duty Hydraulic Cylinder
  • Medium : Compressed air, filtered, lubricated and non-lubricated
  • Operation : Double acting, adjustable cushioning
  • Operating Pressure : 2 - 17 bar (4
  • Operating Temperature : 0oC to +80oC

We are offering a wide range ofHeavy Duty Hydraulic Cylinder.

View Complete Details
Ask Latest Price & Details
Pneumatic Door Operation

Pneumatic Door Operation

A complete solution for one source of Pneumatic Door operation in which you have a competent and experienced partner with proven track record working for you . Nucon's fully automatic product range is an ideal solution which can fit to your specific application.

Nucon will design and supply the complete Operating Mechanism for Pneumatic Door and prove them to your satisfaction. The current range includes Operating Mechanisms for the Inswing Door, Out swing Door, Jack Knife Door, and the complete Retractable Foot Step.

Nucon's pneumatic doors are fitted with standard passenger safety features like Manual switch in case of Emergency and Finger protection device. Optional feature like indicating lamps and blinkers etc. are provided as per customer requirement

Nucon's products are built in state of the art manufacturing plant with ISO-9000 certification and world class technology. High quality components guarantee perfect product performance.
View Complete Details
Ask Latest Price & Details
adsorption dryers

Adsorption Dryers

ECOCLEAN compressed air filters meet the strictest quality requirements and are extremely economical to purchase, operate and maintain. The housing is made of cast aluminium, with a chromebased protective coating on the inside and outside and an additional powder coating on the outside.
Features:
  • Optimized flow, due to the curved compressed air inlet
  • Prevention of corrosion and bacteria formation
  • The filter element is fastened securely by tie-rod
  • Filter element with stainless steel cylinder for high strength
  • The filter medium is wound up to 8 times, ensuring long life and lowdifferential pressure
  • The dimensionally stable drainage layer made of needled felt prevents any deterioration in filter performance
  • Fitted with automatic condensate drain as standard
  • Easy to service and maintain, with hexagon nut flats on housing
View Complete Details
Ask Latest Price & Details
Cartridge Filters

Cartridge Filters
Activated carbon cartridges CAK and Hopcalite cartridges HCK

KSI activated carbon cartridges of series CAK are highly effective oil vapour adsorption filters. They were specially designed to adsorb oil vapours and odours in compressed air and gas streams.

Designed as a filter cartridge, each element is filled with granulated activated carbon. Large-pore metal sieves in the generous apertures ensure a low pressure difference at the inlet and outlet. High-grade filter mats trap contamination at the inlet and separate out any abrasion at the outlet.
Advantages of CAK cartridges:
Longer service life than conventional elements
Better process control
Lower residual oil content
Higher dimensional accuracy
Cost-efficient solution in comparison to oil-vapour adsorbers
Can be retrofitted in all filter housings at any time
View Complete Details
Ask Latest Price & Details
Compressed Air Filter

Compressed Air Filter
End caps of polymer material
  • No "afflorescence" and therefore no formation and accumulation of bacteria
  • No damage to the screw thread in the filter head
  • Filter remains undamaged even without greasing
Larger filter area with up to 8-fold winding
  • Depth filtration instead of surface filtration increases the available filter areaAdvantages::
  • Differential Pressure increases less rapidly
  • Greater efficiency of the element due to improved absorption
Drainage layer of needle felt
  • Does not swell as air or gas streams through, therefore no cracking
  • Needle felt does not contain any silicon
  • Can withstand temperatures up to 120 C
Spirax stainless steel cylinders
  • Internal and external supporting cylinders of stainless steel
  • Up to 40% lower pressure difference due to the special form and arrangement of the open surfaces
  • More stable than conventional perforated plates and expanded metal, therefore more reliable operation and longer duty periods
  • Alternative filter elements are available for:Alup - Atlas Copco - Beko - Boge - Compair - Deltech - Domnick Hunter - Ecoair - Hankison - Hiross - Ingersoll Rand - Kaeser - Sullair - ultrafilter - Zander
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.