NUSHAR INDIA FUTURE TECH PVT. LTD.

Jodhpur, Rajasthan

We offer CCP Mix Waterproofing Compound to the clients. CCP Mix Waterproofing Compound, offered by us, offers toughness & hardness to the cement when added to it. Our CCP Mix Waterproofing Compound is crack and water resisting which offers solution for dampness and salinity. Further, we are a prime Manufacturer, Exporter and Supplier of CCP Mix Waterproofing Compound.

Features

• Crack repair additive
• Solution for Damp-free and salt-free walls
• Anti-shrinkage
• Long Life and maintenance free additive for new plaster
• High bonding (anti-erosion)

Areas of Applications

• Bathrooms
• Terraces
• Water storage tank
• RCC (surface repair)
• Kitchens
• Crack repair
• Walls

How to Use

• Shake well before use.
• Add suggested percentage of CCP mix waterproofing compound in water.
• Add the mixture in cement & sand.
• Clean the surface and dry it properly.
• Apply the mixture to the desired areas and let the mixture to be cured till 12-18 hours.

Transparent Waterproofing Chemical (Proseal - TC), offered by us, is a protective sealant transparent water proofing chemical. Transparent Waterproofing Chemical (Proseal - TC) is light milky liquid, which turns transparent after curing. Transparent Waterproofing Chemical (Proseal - TC seals fine pores of surface by entering them. Transparent Waterproofing Chemical (Proseal TC) develops a thin transparent film of 3 coats to protect the surface from weather attacks.

Features

• High penetration due to low surface tension
• Protects and increases the life of the treated surface.
• 100% water proofing transparent chemical coat.
• Anti-fungal and eco-friendly (aqua base)
• No change in appearance of the original surface.
• Air drying and single component material

How to Use

• Clean thoroughly with water to remove dust / soil and any other loose particle from the surface.
• Wipe out the water before application.
• Wait for surface to dry.
• Apply 2 to 3 coats with brush or spray uniformly (Wait for at least 30 min. after each coat)
• Surface is ready to use after few hours.

Application Areas

• Brick work
• Sandstones
• Slates
• Marble
• Concrete
• Wood
• Cast stones etc.
• Granite's
• Lime stones

Note : Transparent Waterproofing Chemical (Proseal TC) should be applied on backside of stones before laying them on floor to avoid seepage spots.

Smart C.C.P Mix+ is added in Cement which in results give toughness & Hardness to the CementCrack resisting abilityWater ResistantSolution for Salinity or Dampness (*with particular process mentioned in the document of (Smart Master Coat)

We offer Transparent Waterproofing Chemical (DWAR T-Coat) to the clients. Our Transparent Waterproofing Chemical (DWAR T-Coat) is used as a stone bottom sealer and features a transparent glossy film. Transparent Waterproofing Chemical (DWAR T-Coat) can be applied with the help of brush, spray or cotton and it us used in cladding, sandstones and handicrafts.

Features

• Transparent glossy film
• Single component coating
• Can be applied on any surface (cement, stone, wood, plastic, iron etc.)
• Dust, water, acid & rust proof.
• Washable film
• Can be applied by spray/ brush/ cotton

Areas of Applications

• Sandstones
• Cladding
• Fountains
• Handicrafts

 

How to Use

• Surface is to be totally dry & Dust/ Oil/ Grease free.
• Apply 2-3 coats with spray, sponge or brush uniformly (wait for at least 30 minutes after each coat.
• Surface is ready for use

Precaution

• Surface should be totally dry & dust/ oil/ grease free.
• Clear brush, tools or spray gun with NC thinner / toulene solvent.