Our Products
manufactures and supplies a new generation of cable entry systems that provide perfect fit to all type of coaxial cables used in transmission. Rubber boots are made out of specially formulated self-compressing EPDM rubber that makes it water proof and weather resistant. The grade of rubber used to manufacture boots excels in properties like heat resistance, ozone resistance, weatherproofing and withstanding low temperatures.
We hold expertise in manufacturing, supply and export of weather proofing kits, which are in conformational to industrial quality standards. BRIPOL Sealant of these kits makes an efficient water tight weather shield around coaxial connectors & cables and ensure moisture proof connection and long cable life. These kits also dampen vibrations and thereby prevent the loosening of connectors at jumper cable interface.
Oasis Projects is a manufacturer and supplier of Earthing Bus Bar to major telecom operators. An eight holes copper bar is mounted on a mounting frame isolated with EPOXY insulator.
The High-Amp Accessories Grounding Kit is designed to accommodate the grounding of accessories installed. The kit is designed for use with 600 amps elbows and other accessory where cable jacket - to - accessories sealing and high-ampicity grounding is desired.
Available in a wide range of materials, these cable ties all feature internal serrations allowing for a positive hold onto cable, hose and pipe bundles. The design of the head guarantees a high tensile strength whilst allowing a very low insertion force, this, combined with the bent tail design of many of the ties, ensures a simple and quick installation.
offer different type of combiner for combining different frequency Band. 2:1, 2:2, 3:1, 4:2, 4:4 Combiners and POI with N and DIN interface are available. We also design customized product.
SPECIFICATIONS: |
||||
|
2:1 Power Combiner |
3:1 Power Combiner |
4:1 Power Combiner |
2:2 Power Combiner |
Operating Frequency Band |
700-2700 MHz |
700-2700 MHz |
700-2700 MHz |
700-2700 MHz |
3rd Order IMD |
-140dBc |
-140dBc |
-140dBc |
-140dBc |
3rd Order IMD Test Method Carriers |
Two +43 dBm |
Two +43 dBm |
Two +43 dBm |
Two +43 dBm |
Average Power, Maximum |
150 W |
150 W |
150 W |
150 W |
Coupling |
3.0 dB |
4.8 dB |
6.0 dB |
3.0 dB |
Coupling Tolerance |
+ 0.5 dB |
+ 0.5 dB |
+ 0.5 dB |
+ 0.5 dB |
Impedance |
50 ohm |
|
|
|
Insertion Loss at @ 700-2700 MHz Frequency Band |
< 0.2 dB |
< 0.2 dB |
< 0.2 dB |
< 0.2 dB |
Isolation at Frequency Band |
> 23 dB @ 700-2700 MHz
|
|||
Return Loss |
> 20.8 dB |
> 20.8 dB |
> 20.8 dB |
> 20.8 dB |
VSWR |
< 1.2 |
< 1.2 |
< 1.2 |
< 1.2 |
manufactures jumpers with different cable and connectors combinations used exclusively in telecom as BTS an IBS accessories. Highly sophisticated induction machine is used in soldering technology ensuring superior electrical characteristics.
ELECTRICAL SPECIFICATIONS: |
|
Frequency Range |
DC to 2.7 GHz |
Characteristic Impedance |
50 Ω |
VSWR |
1.8 (Typically), 2.0 (Max) |
Return Loss |
-1 GHz : > 26dB p to 2.2 GHz : > up to 2.7 GHz : > 20.8 dB |
PIM3 (Passive third order Inter-modulation) |
< -160dBc with 2x43 dBm Carriers |
Attenuation for Cable Per Meter ( Max at 20ÌŠ C) |
|
800 MHz |
0.11 |
900 MHz |
0.12 |
1800 MHz |
0.17 |
2200 MHz |
0.19 |
2700 MHz |
0.22 |
Insertion loss for a connector |
0.05 dB √ (Freq in GHz) (Approx) |
Insulation Resistance |
>10000 MΩ |
Contact Resistance of the connector |
<0.4mΩ for the centre contact / <1.5mΩ for the outer contact |
MECHANICAL SPECIFICATIONS: |
|
Reliability of Contact |
Minimum 500 mating |
Cable Retention Force |
Maximum 250 N |
(Before degrading Electrical Specification) |
|
Coupling Nut Torque |
Minimum 40-60 N mtrs (Manual) |
Bending Radius (Repeated Bending) |
Minimum 32mm |
Bending Radius (Single Bending) |
Minimum 25mm |
ENVIRONMENT DATA: |
|
Operating Temperature Range |
-10ÌŠC to +55ÌŠC |
Storage Temperature Range |
-20ÌŠC to +60ÌŠC |
MATERIAL AND FINISH - CONNECTOR: |
|
Body |
Brass (ASTM B 16) / Tri Alloy |
Insulator |
PTFE (ASTM D1457, Type 1, Grade 1) |
Inner Contact |
Phosphor Bronze |
Gaskets |
Silicon Rubber |
Other Metal Parts |
Brass (ASTM B 16) / Tri Alloy |
MATERIAL AND FINISH - CABLE: |
|
Inner Conductor |
Copper Clad Aluminum |
Dielectric |
Foamed Polyethylene |
Outer Conductor |
Corrugated Copper Tubing with Black Polythylene Jacket |
New design cavity power splitter frequency Band ranging 698 MHz to 27000MHz is offered for in - building solution and Distribution antenna system. The centre road made of brass as well as aluminium is available as per customer requirement.
SPECIFICATIONS: |
|||
Electrical Specification |
2-Way Splitter |
3-Way Splitter |
4-Way Splitter |
Operating Frequency Band |
700-2700 MHz |
800-2500 MHz |
800-2500 MHz |
Average Power, Maximum |
300 W |
300 W |
300 W |
Impedance |
50 ohm |
50 ohm |
50 ohm |
Return Loss |
> 20.8 dB |
> 19.1 |
> 19.1 |
Split Loss |
3.0 dB |
4.8.0 dB |
6.0 dB |
Dissipative Loss |
+ 0.3 dB (at Frequency Band @ 700-2700 MHz |
+ 0.4 dB (at Frequency Band @ 700-2500 MHz |
+ 0.4 dB (at Frequency Band @ 700-2500 MHz |
VSWR |
< 1.20 |
< 1.25 |
< 1.25 |
3rd Order IMD |
< 140 dBc |
< 140 dBc |
< 140 dBc |
3rd Order IMD Test Method |
Two +43 dBm Carriers |
Two +43 dBm Carriers |
Two +43 dBm Carriers |
Inner Contact Plating |
Silver |
Silver |
Silver |
Outer Contact Plating |
Tri-alloy |
Tri-alloy |
Tri-alloy |
Application |
Indoor/Outdoor |
Indoor/Outdoor |
Indoor/Outdoor |
Ingress Protection Test Method |
IEC 60529:2001, IP65 |
IEC 60529:2001, IP65 |
IEC 60529:2001, IP65 |
Operating Temperature |
25ÌŠ C to +85ÌŠ C (-13ÌŠ F to +185ÌŠ C) |
25ÌŠ C to +85ÌŠ C (-13ÌŠ F to +185ÌŠ C) |
25ÌŠ C to +85ÌŠ C (-13ÌŠ F to +185ÌŠ C) |
We offer Hybrid Type coupler series with 5dB, 7dB, 10dB, 15dB and 20dB, very reliable, good return loss and low PIM is its main features.
SPECIFICATIONS: |
||||
Electrical Specifications |
7dB Coupler |
10dB Coupler |
15dB Coupler |
20dB Coupler |
Coupler Interface |
N Female |
N Female |
N Female |
N Female |
Colour |
Black |
Black |
Black |
Black |
Operating Frequency Band |
700-2700 MHz |
700-2700 MHz |
700-2700 MHz |
700-2700 MHz |
3rd Order IMD |
- 140 dBc |
- 140 dBc |
- 140 dBc |
- 140 dBc |
3rd Order IMD Test Method |
Two +43 dBm Carriers |
Two +43 dBm Carriers |
Two +43 dBm Carriers |
Two +43 dBm Carriers |
Power (Maximum) Watt |
200 |
200 |
200 |
200 |
Coupling |
7.0 dB |
10 dB |
15 dB |
20 dB |
Coupling Tolerance |
0.8 dB |
1 dB |
1 dB |
1 dB |
Impedance |
50 ohm |
50 ohm |
50 ohm |
50 ohm |
Through Loss at Frequency Band 700-2700 MHz |
<1.5 dB |
<0.7 dB |
<0.5 dB |
<0.2 dB |
Isolation at Frequency Band @ 700-2700 MHz |
26 dB |
26 dB |
26 dB |
26 dB |
Return Loss |
> 20.8 dB |
> 20.8 dB |
> 20.8 dB |
> 20.8 dB |
VSWR |
< 1.2:1 |
< 1.2:1 |
< 1.2:1 |
< 1.2:1 |
They comprise two tight buffer fibres housed within a common outer jacket in OM1, OM2, OM3, OM4, OS1, OS2 multi-mode and single mode variants. Both ends are terminated with a high performance hybrid or single type connector comprising of a SC, ST, FC, LC, MTRJ, E2000 connector in simplex and duplex. These are typically not ruggedized depending on the application and a spring loaded electrical contact housed within LSHF plastic shell possible, making them suitable for internal use. 100% factory transmission tested per ANSI/TIA-568-C.3. Slim-profile boots with durable flexible cable strain relief. Available in 0.9mm, 1.6mm, 2.0mm, 3.0mm sizes.
Oasis offers a highly reliable quarter wave co-axial Lighting arrestor with DIN (M) to DIN (F) interfaces. Very low PIM3 is maintain to keep pace with the present requirement.
FREQUENCY BAND |
VSWR |
RETURN LOSS |
820-960 MHz |
1.13 |
26.40 |
1710-2500 MHz |
1.15 |
24.20 |
Oasis Projects is capable to offer a vast range of RF co-axial connector with precision dimension and RF characteristic using highly sophisticated CNC and other Machines. Manufacturing is carried out in strict accordance with the IEC MIL international standards. It manufacturing N and DIN type Connectors regular basis. It also manufactures SMA, SMB, SMA, TNC, TQ etc connectors on demand. Oasis Projects has an Electroplating unit of its own that exclusively control plating criteria for the connectors.
ELECTRICAL SPECIFICATIONS: |
|
Operating Frequency Band |
DC to 3 GHz |
Connector Impedance |
50 ohm + 1 ohm |
VSWR |
< 1.10 |
3rd Order IMD |
-116 dBm (-159 dBc) @ 1800 MHz |
3rd Order IMD Test Method |
Two +43 dBm Carriers |
Outer Contact Resistance, Maximum |
0.2 mOhm |
Inner Contact Resistance, Maximum |
1.0 mOHm Max |
Insulation Resistance, Maximum |
5000 MOhm |
Insertion Loss, typical |
0.05 dB √ (Freq in GHz) |
MECHANICAL SPECIFICATIONS: |
|
Outer Contact Attachment Method |
Clamp |
Inner Contact Attachment Method |
Captivated |
Outer Contact Plating |
Tri-Alloy Plating |
Inner Contact Plating |
Silver over Tri Alloy |
Attachment Durability |
25 cycles |
Interface Durability |
500 cycles |
ENVIRONMENT DATA: |
|
Operating Temperature |
-40ÌŠC to +85ÌŠC (-40ÌŠF to +185ÌŠF) |
Storage Temperature |
-55ÌŠC to +85ÌŠC (-67ÌŠF to +185ÌŠF) |
Corrosion Test Method |
MILSTD1344A, Method 1001.1, Test Condition A |
Sealing Class (Mating Condition) |
IP 67 |
MATERIAL AND FINISH - CONNECTOR: |
|
Body |
Brass (ASTM B 16) / Tri Alloy |
Insulator |
PTFE (ASTM D1457, Type 1, Grade 1) |
Inner Contact |
Phosphor Bronze |
Gaskets |
Silicon Rubber |
Other Metal Parts |
Brass (ASTM B 16)/ Tri Alloy |
offers different type of antennas suitable for IBS or DAS. Our self design and manufacturing Omni, Panel and Yagi Antennas are very popular in the market. MIMO OMNI and MIMO Panel are new addition in the antenna series. Antenna performances are 100% tested. Special process is carried out in maintaining the PIM 3.
SPECIFICATIONS: |
||||
Interface |
Vertical |
+45ÌŠ |
-45ÌŠ |
|
Frequency Range (MHz) |
98 ~ 960 |
1710 ~ 2690 |
1710 ~ 2690 |
|
Gain (dBi) |
4 |
7 |
7.5 |
|
Half-Power Beam Width(ÌŠ) |
H : 85 |
V : 65 |
H : 75 V: 55 |
|
VSWR |
< 1.5 |
< 1.5 |
< 1.5 |
|
Third-order Intercept Point (dBm) |
< 97 |
|||
Isolation Between Ports (dB) |
> 25 |
|||
Cross-polar ration (dB) |
> 15@0ÌŠ |
> 10@+/-60ÌŠ |
||
Input Impedance |
50 |
|||
Polarization |
Vertical and Horizontal |
|||
Maximum Input Power(W) |
50 |
|||
Lightning Protection |
DC Ground |
|||
Input Connector Type |
2xN Female |
Communication Rack: Oasis Projects having exclusive infrastructure in sheet metal work. It manufactures different type of racks useful in Tale Communication, DCDB Box, Rack Mount Frame, DDF, DG canopies etc regular basis.
Communication Rack: Oasis Projects having exclusive infrastructure in sheet metal work. It manufactures different type of racks useful in Tale Communication, DCDB Box, Rack Mount Frame, DDF, DG canopies etc regular basis.