Write a Review
Our Products
Leading Manufacturer, Supplier & Retailer of HDPE Blow Molding Machine.
| Product Range:20 Litres to 100 Litres 25 Litres (Accumulator Type) Blow Molding Machine | |||
| Machine Features: | |||
| Perfect melt Quality with Higher Output. Extruder with up/down Movement Manual (Standard) / Motorized (optional). Inbuilt Thrust Helical Gear Box for Required torque. A.C. Motor with VFD for Variable Speed of Extruder.Accumulator type FIFO parison Die.Higher Production with Lower Power Consumption Pneumatic Parison Stretching Unit for Rectangle Jerry Canes. On/Off type Multi Points Hydraulic Parison Thickness Control. | |||
|
| MACHINE MODEL | UNIT | OEPLBM-25 | OEPLBM-50 | OEPLBM-75 | OEPLBM-100 |
| EXTRUDER | 65M | 75L | 90S | 90M | |
| Screw Diameter | mm | 65 | 75 | 90 | 90 |
| Length/Diameter Ratio | l/d | 24:1 | 26:1 | 21:1 | 24:1 |
| Maximum Plasticizing Capacity HDPE | kg/hr | 90-100 | 130-135 | 155-170 | 180-200 |
| Barrel Heating Load | kw | 13 | 19 | 35 | 40 |
| Screw Speed Range HDPE | rpm | 10-100 | 12-120 | 10-100 | 10-100 |
| Thyristor Controlled AC Motor AT 1500 RPM | kw | 18.5 | 37.5 | 37.5 | 45 |
| ACCUMULATOR CAPACITY | kg | 2 | 6 | 9 | 9 |
| Die Heating Load | kw | 16 | 22 | 28 | 28 |
| MOULD DIMENSION | |||||
| Height (Maximum) | mm | 600 | 750 | 875 | 1000 |
| Width | mm | 850 | 850 | 900 | 950 |
| Thickness (Minimum) | mm | 2x155 | 2x225 | 2x225 | 2x225 |
| CLAMPING UNIT | |||||
| Clamping Force (Maximum) | mt | 14.25 | 17.25 | 50.25 | 60.25 |
| Daylight (Maximum) | mm | 800 | 1100 | 1250 | 1350 |
| Mould Opening Stroke | mm | 2x150 | 2x330 | 2x450 | 2x450 |
| Daylight (Minimum) | mm | 2x150 | 2x220 | 2x220 | 2x220 |
| HYDRAULIC UNIT | |||||
| Opening Pressure | kg/cm2 | 150 | 150 | 150 | 150 |
| Drive Power, Hydraulic Pump | kw | 15 | 18.5 | 37.5 | 37.5 |
| Oil Tank Capacity | ltr | 350 | 350 | 850 | 850 |
| INSTALLED TOTAL ELECTRIC POWER APPROX. | kw | 63 | 97 | 139 | 149 |
| MACHINE INSTALLATION | |||||
| Floor Space (LxWxH) (Approx) | m | 5.0x5.0x4.0 | 5.5x5.5x4.5 | 6.5x6.5x5.0 | 7.5x6.5x5.0 |
| Net Weight (Approx) | mt | 8.5 | 9 | 9.5 | 10.5 |
| Utilities | |||||
| Air Consumption | lpm | 350-550 | 350-550 | 350-550 | 350-550 |
| Air Pressure | kg/cm2 | 8-10 | 8-10 | 8-10 | 8-10 |
| Water Consumption at 28 C | lpm | 100-120 | 100-120 | 140-160 | 140-160 |
| Water Pressure | kg/cm2 | 3-4 | 3-4 | 3-4 | 3-4 |
| MAXIMUM VOLUME FOR SINGLE CAVITY | 25 | 50 | 75 | 100 |
Mrunal Ramanuj (Ocean Extrusions)
Office No. 11-15, Wing A, First Floor, Barcelona Complex Near Odhav Circle, Odhav, Ahmedabad - 382415, Ring Road, Rajkot, Gujarat
Share us via
