• Stacked disc structure provides three dimensional filtration.


• Ensures high partucle retention and alloew longer interval between cleaning


• Coarse particles retained on element surface and fine particles retained in grooves.


• Installation is possible in any position, both vertical and horizontal, inlet-outlet connections possible in both inline and angular orientation.


• Impurities retained on element surface can be flushed out with drain valve.


• Corrosion-proof and durable polypropylene body construction.


• All plastic and metal parts are resistant to common agricultural chemicala fertilizers and flushing agents used with the system.

OM brand Screen filter is mainly produced from the non-toxic materials and is resistant to or protected against degradation caused by existing working conditions and type of water used in agricultural irrigation.

OM Screen Filter is mainly divided in two parts:

• Strainer Housing


• Filter element

The construction of the strainer housing is made in such a way to facilities its proper installation in its intended location and position. The strainer is

[also]

designed in such a way that after assembly of the filter element in the strainer housing, all the water flowing through the strainer flows through the filter element.

The Strainer is designed in such a way that, contaminants accumulated on the filter element or in the strainer housing do not enter the supply line while cleaning or replacing the filter element.

OM brand filter element is made up from stainless steel mesh having a capacity of 150 mesh sieve mounted on perforated pvc pipe. While producing the OM filter element care is taken that, sealing does not increase or decrease the resistant of the filter element to fearing.

Filtering with media filters is also recognized as depth filtration. The media filters perform the filtration of water through a thick layer of graded particles. These particles can be sand, gravel or other granular materials. The filtration rate depends on the effective size of the bedding and the water velocity through the filter. System offers a complete line of manifolds, accessories and control systems For single or multiple media filters. The Customer Support Department is at your service in designing complete media filtration systems with gravel, sand, active carbon or multi-layer beddings: For manual or automatic operation, For single or multi-units, manifolded For complete filtration solutions.

Used in micro irrigation systems to remove sand and silt particles from irrigation water.

• Mild steel construction.


• Coated with more than 70 micron thick deep blue coloured epoxy powder from both inside and outside surface for protection against corrosion and weather effects.


• Hydrodynamically designed to create maximum centrifugal action to separate particles heavier than water


• Efficiently removes fine sand and silt particles of size higher than 75 microns and specific gravity more than 2.65.


• Special protection plate are provided at the bottom of the cone to prevent wearing.


• Large volume of dirt collection chamber increases flushing interval.


• Dirt can be easily flushed out through dirt collection chamber.


• Available in maximum operating pressure of 10 kg/cm (142 psi).


• Standard end connections are BSP flanged. Please specify for other end connections. (ANSI flanged or Easy-Fix).


• Recommended to install before media/screen filters to remove particles heavier than water.


• Improves operational efficiency & life of media / screen filters.


• Can also be supplied in stainless steel as a special order.


• Can be supplied in higher flow capacities in multiple batteries option.