Winner International LLC

Muscat, Oman

Our Standard Patch Fittings (OPF-1) are used to connect over panel and side panel with pivot. The Fittings we make available are known for their dimensional accuracy, durability and reliable performance.

Specifications :

Over Panel Side Panel Connecting Patch

• With SS 304 cover
• Cover secured with small ‘L’ key
• Pivot pin of 15mm diameter
• Adjustable pivot point 55/65mm
• Finish : SSS

The Standard Patch Fittings (OPF-2) offered by us is secured on to the door leaf top to accept the pivot of OPF-1 / OPF-4 or OFS-ACC-GD. Buyers can obtain the Patch Fittings at nominal rates.

Specifications : Top Patch

• Variable pivot point of 55 or 65mm
• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

Buy excellent quality Standard Patch Fittings (OPF-3) from us! Our Patch Fittings are secured on to the bottom of the door leaf to accept the spindle of ozone floor springs.

Specifications  :Bottom Patch

• Variable pivot point of 55 or 65mm
• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

Manufactured in compliance with set industrial norms, our Standard Patch Fittings (OFS-ACC-GDP) are used as top pivot for patch/point fitting doors. We offer the Patch Fittings at reasonable rates from us.

Specifications  :Stainless Steel Pivot

• Top pivot with 15mm diameter pin
• Wear resistant SS 304 pivot pin
• Pivot held in overhead structure
• Finish : SSS

We offer precisely engineered Standard Patch Fittings (OPF-2 PLUS). Our Patch Fittings are dimensional accurate and durable. The Patch Fittings offered by us retain their physical properties under all conditions.

Specifications :Top Patch

•  Variable pivot point of 55 or 65mm

•  With SS 304 cover of size of OCFH-100

•  Cover secured with small ‘L’ key

•  Finish : SSS

Designed for connecting over panel and side panel, our Standard Patch Fittings (OPF-41 L) is to be used with a Fin. Buyers can obtain the Patch Fittings at reasonable rates from us

Specifications :Over Panel Side Panel Connector with Fin Fitting Left

• With pivot pin of 15mm diameter.
• Left handed Fin
• Handing policy to be determined by looking from outside of the structure
• The pivot point can be altered from 55mm to 65mm
• With SS 304 cover
• Cover secured with small ‘L’ key
• For door hinged on left side with fin on the inside.
• Finish : SSS

Our Standard Patch Fittings (OPF-41 R) is designed for connecting over panel and side panel. The entire range of the Patch Fittings is manufactured in adherence with set industrial norms.

Specifications  :Over Panel Side Panel Connector with Fin Fitting Right

• With pivot pin of 15mm diameter.
• Right handed Fin
• Handing policy to be determined by looking from outside of the structure
• The pivot point can be altered from 55mm to 65mm
• With SS 304 cover
• Cover secured with small ‘L’ key
• For door hinged on right side with fin on the inside
• Finish: SSS

Installed on to over panel and fin, our Standard Patch Fittings (OPF-51) are used for back-to-back doors with pivot pins. One can obtain the Fittings at competitive rates from us.

Specifications :Over Panel Connector forBack To Back Doors

• With pivot pins of 15mm diameter.
• Connecting fin with the over panel.
• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

The Standard Patch Fittings (OPF-610) we make available are used to secure the over panel and side panel at the opening edge of the door. Our Fittings are known for their excellent quality and durability.

Specifications  :Over Panel Side Panel Connector 

• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish: SSS

Precisely engineered, our Standard Patch Fittings (OPF-610 L) are used to secure opening edge of the door installed on to fin. Our Patch Fittings are highly durable and corrosion resistant.

Specifications  :Triple Glass Connector with Fin on the Left Side

• Handing policy to be determined by looking from outside of the structure.
• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

Get in touch with for quality approved Standard Patch Fittings (OPF-610 R)!  The Patch Fittings are used to secure opening edge of the door installed on to fin.

Specifications :
Triple Glass Connector with Fin on the Right Side

• Handing policy to be determined  by looking from outside of the structure.
• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

Contact us for premium Standard Patch Fittings (OPF-610 ST)! The Patch Fittings offered by us are used for connecting over panel and side panel on the opening edge of the door.

Specifications  :Over Panel & Side Panel Connector for making  Door Single Action

• Square look on one side and ‘L’ shape look on other side
• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

Highly acclaimed for their dimensional accuracy and durability, our Standard Patch Fittings (OPF-620) are used for integrating a maximum of four numbers of fixed glasses. Our Fittings are appreciated for the high dimensional accuracy.

Specifications :Quadraple Connector

• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

Our Standard Patch Fittings (OPF-620 F) are designed for integrating four glasses and connecting with a fin.  Patch Fittings we make available are manufactured incompliance with set industrial norms.

Specifications :Quadraple Connector with Fin

• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

Structurally stable, our Standard Patch Fittings (OPF-630 F) are chemically treated to prevent corrosion.  The Patch Fittings offered by us are used for connecting two glasses in line with a fin.

Specifications  :Double Glass Connector with Fin Fitting Inside

• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

Accurately designed, our Standard Patch Fittings (OPF-640) are used to secure glass with a fixed structure (ceiling, floor or wall). Our Patch Fittings are highly acclaimed for their unmatched quality and corrosion resistance.

Specifications :Glass Clamping Connector

• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

Our Standard Patch Fittings (OPF-650) are designed to hold two glasses together and securing this with a fixed structure likes floor, wall or ceiling. Buyers can obtain the Fittings at reasonable rates

Specifications :
Glass to Glass Connecting Patch

• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

Known for its high dimensional accuracy and durability, our Standard Patch Fittings (OPF-660) are manufactured in compliance with international quality standards. The Patch Fittings we make available are used to integrate two glasses in the centre.

Specifications :Double Glass Connector

• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

Our Standard Patch Fittings (OPL-2A & 2B) is specially designed to lock the door at centre on another fixed glass. The Patch Fittings we make available are known for their unmatched corrosion resistance and quality.

Specifications  :Centre Patch Lock and Strike Box 

• With a euro profile cylinder and strike box
• Dead bolt projection of 15mm (single throw)
• Three high security computer keys
• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

Designed and manufactured using advanced technology; our Standard Patch Fittings (OPL-3A) are used to lock the door at centre onto a fixed glass or wall. Buyers can obtain the Fittings at competitive rates.

Specifications  :Thumb Turn Lock

• Can also be used for locking door on wall or floor
• Locking with the help of thumb turn
• Comes with Strike Plate
• Dead bolt projection of 10mm (single throw)
• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

Manufactured in adherence with set industrial norms, our Standard Patch Fittings (OPL-3B) come with SS 304 cover. The Patch Fittings offered by us are structurally stable, corrosion resistant and durable.

Specifications  :Strike Box for OPL-3A

• To accept lever of OPL-3A
• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS

Suitable for 10mm and 12 mm glass, our Standard Patch Fittings (OPL-4A-4B N) are designed to lock the door at centre onto a fixed glass (without cutout). One can obtain the Fittings at nominal rates.

Specifications :Patch Lock with Strike Box(without cutout)

• Can also be used for sliding doors & Double Doors
• Suitable for 10mm & 12mm glass
• Requires No Cutout in Glass
• Operates with key on one side
• Stainless Steel  Grade 304
• Finish : SSS

Precisely engineered, our Standard Patch Fittings (OPL-4A-N-S) are used to lock the single door (without cutout). The Patch Fittings offered by us are suitable for 10mm and 12 mm glass.

Specifications  :Glass Door Lock with Strike plate (Without Cutout)

• Can also be used for sliding doors
• Suitable for 10mm & 12mm Glass
• Requires no cutout in glass
• Operates with key on one side
• Finish : SSS

The Standard Patch Fittings (OZ-EP-PL-1A) offered by us is known for its dimensionally accuracy, high corrosion resistance and quality. Our Patch Fittings are designed with a Euro profile cylinder and strike plate.

Specifications :Corner Patch Lock with Strike Plate

• With a Euro profile cylinder and strike plate
• Dead bolt projection of 15mm (single throw)
• To lock the door at centre/floor
• Three high security computer keys
• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : PSS

Standard Patch Fittings (OZ-EP-PL-1B) we make available are precisely manufactured in adherence with set industrial norms. Our Patch Fittings are used to lock the door at centre/floor. One can obtain the Fittings at reasonable rates.

Specifications :One Side Corner Lock with Strike Plate

• Thumb turn knob for single side locking
• To lock the door at centre/floor
• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : PSS

Finely finished, our Standard Patch Fittings (OPL-1) is designed to lock swing door on floor/ceiling. The Patch Fittings we make available are structurally stable, dimensionally accurate and highly durable.

Specifications  :Corner Patch Lock with Strike Plate

• With a euro profile cylinder and strike plate
• Dead bolt projection of 15mm (single throw)
• Three high security computer keys
• With SS 304 cover
• Cover secured with small ‘L’ key
• Finish : SSS