Write a Review
Our Products
Heating Coils
2 Products availableBoilers
2 Products availableBoiler Fittings
1 Products availableIndustrial Heaters
1 Products availableMachines And Equipments
1 Products availableSeparating Machines
1 Products availableIndustrial Ovens & Furnaces
1 Products availablePumps, Pumping Machines & Parts
1 Products available
| Fully automatic Coil Type LDO/Diesel/FO and Gas Fired IBR Small Industrial Steam Boiler | |||||||||||||||||||
|
| Boiler Model | Unit | STM -C- 30 | STM -C- 40 | STM -C-50 | STM -C- 60 | STM-C- 80 | STM -C-100 |
| Rated Steam Out put (F & A 100o C) | Kgs/Hrs | 300 | 400 | 500 | 600 | 800 | 1000 |
| Maximum Working Pressure | Kg/Cm2 | 10.54 | 10.54 | 10.54 | 10.54 | 10.54 | 10.54 |
| Thermal Efficiency | % | 87 ± 3 | 87 ± 3 | 87 ± 3 | 87 ± 3 | 87 ± 3 | 87 ± 3 |
| Steam Temperature | o C | 186 | 186 | 186 | 186 | 186 | 186 |
| Fuel Oil Consumption | |||||||
| : LDO | Kg/Hr | 18 | 24 | 30 | 36 | 48 | 60 |
| : FO | Kg/Hr | 19.1 | 25.4 | 31.8 | 38.1 | 50.8 | 63.6 |
| Burner Type | On-Off | On-Off | On-Off | On-Off | On-Off | On-Off | |
| Electric Supply | AC, 3 Phs 415V ±6, 50 HZ, 4 wire system | ||||||
| Average Stack Temperature | oC | 200 | 200 | 200 | 250 | 300 | 300 |
| Total Electric Load | |||||||
| Feed Water Pump Motor | HP | 1.00 | 1.00 | 1.00 | 1.00 | 1.50 | 1.50 |
| Blower | HP | 1.00 | 1.00 | 1.50 | 1.50 | 3.00 | 5.00 |
| Fuel Pump Motor | HP | 0.25 | 0.25 | 0.50 | 0.50 | 0.50 | 0.50 |
| Total Connected Load for LDO fired | HP | 2.25 | 2.25 | 3.00 | 3.00 | 5.00 | 7.00 |
| Dry Weight (Approx.) | Kg | 1300 | 1400 | 1600 | 1700 | 1800 | 1950 |
| Our Steam Pressure Reducing Stations are Pre-fabricated Manufactured ready to install units for steam system management. | ||||||||||
| The Pre-assembled steam pressure reducing stations are individually size to meet end-users specific needs. Inlet & Outlet Piping & Valve are sized as per best engineering practices. | ||||||||||
| Each unit is custom engineered & designed to meet specific system requirement. | ||||||||||
| Features: | ||||||||||
|
| All systems are fabricated & welded as per IBR & are Hydraulically tested | |
| Size | From ½” x ½” to 12” x 20” & higher size as per design requirement |
| Rating | ANSI Class #150,#300, #600, Higher on request |
| End Connections | Flanged to ANSI B 16.5/buttweld to ANSI B16.25 |
| Options | IBR / NON IBR |
| Other Service | Water , Air |
| MOC | CI / CS/ AS/ SS As per requirement |
We manufacture a wide assortment of indoor air filtration systems and industrial air filtration systems like air moisture separator, steam moisture separator, industrial moisture separator, etc., that are fabricated using high quality raw material and are used to for the filtration of air. Applicable in various industries, these moisture separators can be customized to suit the specific requirements of our clients.
| Owing to our vast experience in the industry, we are engaged in manufacturing a range of pressure vessels that cater to the needs of worldwide clients. |
| A pressure vessel is defined as a closed container designed to hold gases or liquids at a pressure level different from the existing pressure. |
| Solidly constructed using finest grade material, our range of vessels are precise in construction, high in performance and have better durability standards. |
| Optimizing the latest technology, we offer a range of chimneys that are manufactured using qualitative material. |
| These chimneys are used for the purpose of venting hot gases or smoke from boilers, furnace etc. Our range is highly admired among our clients for their simple installation, less maintenance, durability and long life simple usage. |
| Available in different heights, diameters and thickness, these chimneys can also be designed as per Client Specifications. |
| Condensate recovery allows you to use all of the valuable Btu within the steam system. | |||||||
| Depending on the pressure, condensate leaving a trap contains approximately 20% of the heat energy transferred at the boiler in the form of sensible heat. | |||||||
| Condensate recovery systems help you reduce three tangible costs of producing steam:
|
Steam distribution headers are fabricated out of carbon steel or alloy steel seamless tubes. Customaries or tailor made items are offered. Headers, after fabrication, are stress relieved to make the Steam distribution headers free from stresses. IBR or 3rd party inspection undertaken.
OMEGA BOILERS (OMEGA BOILERS)
C/O, 20, Nandwana Chambers, Near VIA Char Rasta, Silvassa Road, GIDC 396 195, () ., Vapi, Gujarat - 396195, India
Share us via
