Kolhapur, Maharashtra, India
Our Product / Services
When using iFace 302, users can identify or verify themselves either by face, finger, ID card or PIN/password. The TFT color touch screen of iFace 302 provides ease of use and a rich user experience. The iFace 302 uses state of the art 3D imaging technology while aslo providing hygienic 100% touch-free biometric authentication. The iFace 302 utilizes ZKs latest face and fingerprint matching algorithms. iFace 302 can one to many (1:N) match up to 400 faces and 2000 fingerprints.
When users glance into the camera, it captures the relative position, size, and shape of the users eyes, nose, cheekbones, and jaw. These parameters are then used to create a biometric template which is then used to subsequently verify or identify each user.
The iFace 302 can be used as a stand-alone access control reader by connecting a door lock, exit switch, alarm and door sensor to the relay contacts. The Wiegand IN and OUT ports can be used to connect 3rd party access control panels and peripherals. The iFace 302 also includes a USB-port for offline data backup/management.For even more security, iFace 302 can be purchased with an internal ID card reader which adds still another layer of security.
Hospitals, Theaters, Recording Studios, Bank, Contact tendering room, Church, Conferance room, Classroom, Security services, Miletry units, Secrete services, News room, Library, Musium, prisons, Cinema halls, Auditoriums ETC.
Jamming distance ( coverage ):-JAM 40-50: For GSM cellular systems with CDMA module, up to 40-50 meters radius coverage.
Remarks: The above jamming distances are for reference only; actual jamming distance will be varied depending on the type and location of cellular system.
| Port | Jamming Frequencies | Avg. Output Power | Output Frequencies |
| CDMA | 800 (870-880 MHz) | 35dbm (3w) | 5dbm/100 KHz(min) |
| GSM | 900 (930-960 MHz) | 35dbm (3w) | 5dbm/100 KHz(min) |
| DCS | 1800 (1805-1850 MHz) | 33dbm (3W) | 2dbm/100 KHz(min) |
| PHS | 1900 (1900-1980 MHz) | 33dbm (2W) | 2dbm/100 KHz(min) |
| 3G | (21110-2170 MHz) | 33dbm (3W) | 2dbm/30 KHz(min) |
Built-in color CCD camera (night vision) and lens IR Distance : 20 25 Meters Long life IR LED (up to 10, 000hours)Smart IR on/off control IP66 Weatherproof housing
| Model Number | NT-B20MR | NT-B20MS | NT-B20HS | |||
|
15,734Hz(H) , 60Hz(V) 15,734Hz(H) , 50Hz(V) | |||||
|
512(H) x 492(V) 512(H) x 582(V) | |||||
|
1/60-100,000sec. 1/50-100,000sec. | 768 (H) x 492(V) 752 (H) x 582(V) | ||||
|
1/3" SHARP CCD 420 TV lines | 1/3" SONY Super HAD CCD 520 TV lines | ||||
| Sensitivity | 0.3Lux, 0 Lux at IR on | 0.2Lux, 0 Lux at IR on | 0.5Lux, 0 Lux at IR on | |||
| Signal to Noise | More than 48dB | |||||
| Gain Control | AGC | |||||
| White Balance | Auto ATW 2500-9500 °K | |||||
| BLC | Auto | |||||
| Gamma Correction | 0.45 | |||||
| SYNC System | Internal | |||||
| Lens/Fousc point | 4.3mm (Optional 6mm, 8mm ) | |||||
| Video Output | 1.0 Vp-p, 75 Ohm | |||||
| IR LED | 24 units 850nminfrared LED | |||||
| IR Distance | 20~25 meters (Subject to IR reflection conditions ) | |||||
| IR Status | IR on: Under 10 Lux, by PT auto control | |||||
| LED life | More than 10,000 Hours | IP 66 | ||||
| Power Requirement (± 10%) | DC12V, 500mA | |||||
| Power Consumption (± 10%) | IR on: 300mA, IR off:80mA | IR on: 300mA, IR off:100mA | ||||
| Construction | ||||||
| Operation Temp. | Operating: -20 ~ + 55 °C , Storage: -30 ~ + 80 °C , Humidity:0~95%RH | |||||
| Dimensions ( mm ) | 60 (R) x 68.7 (H) x 99.5(L) | |||||
| Weight ( N.W) | 265g | |||||
| * Design and specifications are subject to change without notice | ||||||
H.264 Algorithm hardware compression4 channel DVR 120(100)fps recording capabilitySupports audio availablePentaplex operation (Playback / Recording / Backup / Ethernet / Live)Multi Language OSDIR Remote ControllerVGA output (for LCD Monitor)USB(Device) port for firmware upgradeUSB2.0(Host) for back upOperate by mouseEasy PTZ camera controlRemote viewer via networkSupports DDNS (Dynamic Domain Name Server)
SC-403 is an innovative Proximity card/TAG reader used in Access Control applications and can be installed stand alone or with any third party panel that supports 6 4-bit Wigand data communication. User will benefit from their unparalleled performance using the state of the art proximity reader . It also supports Password identificati on, User capacity is 10000 users with 50000 transaction log. One External reader can be configured for Exit. The device can be used in 50 different Time Zones, 5 Groups, 10 Combinations , holiday management for Access Control. Menu can be locked with RF card / password as administrator. Communication with host computer is possible through TCP/IP or RS232 and RS485.USB port is optional for data and User transfer.
| Features | |||||
|
| ||||
