Omega Process Engineers

Hadapsar, Pune, Maharashtra

• MaterialStainless Steel
• FinishingPolished
• ConditionNew
• ApplicationIndustrial
• FeatureCost Effective
• Temperature30-300 Deg C
• Total Carbohydrate1 Yr
• Number Of FlowerHydrogenator
• Country of OriginIndia

We offer mixing equipment with variety of impeller system to suit process requirement, as under: Axial Flow Impellers-Conventional Axial Flow Impellers-High Efficiency , Low Power Consuming. Radial Flow Impellers- Conventional. Radial Flow Impellers- High Efficiency , Low Power Consuming High Shear Impellers-For High Viscosity Fluids Close Proximity conveying Mixers With Very Low Shear -Helical Screw Impellers. cGMP Models We have supplied Helical Screw Agitated vessels for high viscosity fluid , above 2, 00, 000 cP (Garware Polyster Limited ) and similarly for medium viscosity levels of 15, 000cP we have supplied up-down interference flow agitated vessels.(Godrej Consumer Products Ltd)

      Being a highly viscous & non-newtonian fluid the heat transfer and pressure drop calculations are tricky. The tube to tube sheet joint plays more important part in soap heat exchangers as stainless steel are susceptible to stress corrosion cracking. We have designed , developed & supplied at least 400 soap heat exchangers upto 5 ton/hr soap handling capacity.  

We have designed and developed film flow type of exchangers for fluids, which are heat sensitive, viscous, flowing at low flow rate and finally allowing only low pressure drop while either cooling or heating /evaporating.   The simpler version is falling film exchangers in which fluid flows in a film flow manner inside the tubes generally in laminar region by use of feed distributors or inserts, resulting in limited heat transfer coefficient.   The improvised version is Agitating the film by use of close clearance rotor otherwise Wiper system, resulting in fairly high heat transfer coefficients meaning less area of heat transfer, homogeneous temperature profile and concentration inside the film improving the quality of the product.   Our Falling Film Coolers/heaters are in operation at M/s. Ranbaxy Lab. Ltd., Dewas and M/s. Hindustan Polyamides & Fibres Ltd, Pune for cooling moderately viscous fatty amines and acetic acid solution & Thin Film Evaporator at M/s. Jubilant Organosys Ltd, Nira, Pune in VAM Plant for recovery of Acetic Acid.

We have developed high performance corrugated tube/shell heat exchangers, which provide increased turbulance & in turn higher heat transfer coefficient even at low Reynolds number. In corrugated tube/shell heat exchangers higher turbulance is achieved due to programmed deformation (i.e. Corrugation) of tube/shell, which induces spiral fluid flow compared to plug flow in smooth tubes/shell. As on today we have designed & supplied at least 500 (Five Hundred) compact corrugated heat exchangers for applications like highly viscous liquid heating/cooling & evaporation of liquids, which involves two phase flows and also for condensation & with operating pressure as high as 35.0 bar.   Advantages Of Corrugated Tube Heat Exchangers Improved heat transfer coefficients, hence compact. High-induced turbulence causing much reduced fouling, hence steady performance over a long period of time. High working pressures & temperatures possible. Modular designs for small applications with flexibility of increasing duty as required. Easy to install. Virtually maintenance free. Low-pressure drops & no gasket failures compared to PHE. Low capital cost compared to PHE/SHE. Designed for easy maintenance/service compared to PHE/SHE, hence minimum downtime. Most suitable for heat sensitive products as no localized heating. Can be installed vertically, inclined or horizontally. Since corrugation induces flexibility, generally external bellows are not required i.e. built in expansion/contraction capability. Suitable for process fluids with particulate matter.

We have in collaboration with Premier PTC of U.S.A., designed, fabricated & supplied Gas Slurry Reactor(s) upto 5 MT capacity for critical applications like Hydrogenation and are working excellently. Our hydrogenator has been optimized to improve gas-liquid mass transfer, to obtain more uniform slurry distribution and better heat transfer. Salient features o

We have in collaboration with Premier PTC of U.S.A., designed, fabricated & supplied Gas Slurry Reactor(s) upto 5 MT capacity for critical applications like Hydrogenation and are working excellently. Our hydrogenator has been optimized to improve gas-liquid mass transfer, to obtain more uniform slurry distribution and better heat transfer. Salient features of our Hydrogenator: Hydrogenator offered by us utilizes a unique self gas inducing type multiple impeller system. The gas in the head space is induced inside the liquid by creating vortex due to top axial flow impellers (high solidity ratio hydrofoil impeller) and narrow baffles in that region. The feed gas being sparged through a sparger at bottom and the head space gas brought down by vortexing are, dispersed in fine bubble form by a radial hydrofoil impeller (hollow parabolic blade) installed at bottom. Uniform solid particles distribution achieved by providing suitable baffle width in the region of radial flow hydrofoil impeller which creates compartmental axial flow also. Hence our design is especially useful in real world industrial application involving slurries. Relative power demand during gassing phase is around 80 to 90% (0.8 to 0.9) of ungassed power, which implies that power of almost similar magnitude as in liquid-solid mixing is being utilized for dispersion (breaking) of bubbles. The system hence becomes stable as cavities (voids) are kept at a minimum. Batch time, selectivity, and product quality are improved accordingly. Due to the unique multiple impeller system offered by us, system will achieve (i) high pumping (ii) high gas dispersion & (iii) uniform solid suspension etc., simultaneously, using power efficiently & improving heat transfer coefficients also. The distance between the two impellers is optimized to achieve best performance for a particular application. Multiple impeller system offered by us will have better control on mass & heat transfer, compared to single impeller system offered by others. Our hydrogenator system has been proven in challenging hydrogenations, where other systems were unsuccessful.