Classical V-Belts are endless belts used in a wide range of applications. These classical v belts have technically good design and are economical for most ordinary drives. Our v belts are anti-static, oil and heat resistant and can be used in applications where belt linear speeds do not exceed 30 meters/sec. We are leading V-Belt manufacturers, exporting various range of v belts, hexagonal belts, narrow v belts and classical belts.

Classical V-Belts and Rubber V Belts come as pre set and fully comply with IS 2494 (Part 1) quality certification standards. Their exceptional operational reliability is the result of the use of high-quality HMLS Polyester cord and Chloroprene in its rubber jacket fabric.

Banded belts are designed by expert team members using best available techniques and following international industrial IS 2494 (part 1) quality certification standards. These are precisely designed and developed for wide range of applications and for most ordinary drives where belt linear speed does not exceed 30 meters/sec. Manufactured from supreme grade HMLS polyester cord and chloroprene in its rubber jacket fabric, these belts are admired for its speedy performance and little cost of maintenance.

Harvester Flat belts for Combine Harvester use come in a wide spectrum of sizes and cross-sections. Their high tensile strength core accounts for low elongation while the specially designed hi-grip wrapping fabric grip gives it excellent grip in the pulley groove, both ensuring very efficient power transmission.

The combine harvester belts which are designed and developed by our expert team members are manufactured from superb quality raw materials. These are manufactured in accordance with international industrial standard to ensure perfect performance under difficult conditions also. These belts are ideal to stand and resist the harsh operating conditions and are perfectly calibrated for use on agricultural applications.

HI-TECH Hexagonal Belts are specially designed for convoluted and serpentine belt drive paths with reverse bends. The sudden direction changes in belt travel put unique stresses and demands on the belt carcass and structure and such loads are reliably handled by these anti-static and oil-resistant belts.

HI-TECH Hexagonal Belts have been designed with a new cross-section that keeps the belt perfectly aligned, both laterally and longitudinally, in the pulley groove. These hexagonal v belts use a high quality Polyester tensile member as its core and chlcroprene is used in insulation rubber and is impregnated in the specially woven covering cloth.

8V section belts are manufactured by experienced team members of our organization in accordance with international industrial standards. Manufactured from anti-static wear resistant cover fabric to ensure proper flexibility and balanced elasticity. We put best available techniques to design these belts which make these perfect to provide effective performance in adverse working conditions also. These can be availed in various thickness and specifications following the precise requirements of clients.

The industrial V belts offered by us are designed and developed by our expert team members using best available techniques to ensure finest quality and longer life of these products. Owing to their "V" shaped cross-section, these belts are acknowledged as V belts. These are designed with different sides which increase the grip, to help cool the belt and relieve stress as the belt bends around small diameter of the pulleys. These belts are extensively acknowledged for its high strength and high rigidity.

HI-TECH Raw Edge V Belts are designed for maximum belt linear speeds of up to 50 mtrs/sec. They are anti-static and highly oil resistant while having the ability to handle a wide temperature range far working. These raw edge v belts carry a high quality Polyester cord core with Chloroprene used in insulation rubber, compression rubber and to impregnate the canvas. Used widely in the automotive sector,
HI-TECH Raw Edge V Beltsare available in the full range of automotive sizes. These Raw Edge V Belts are also made for industrial use.

Wedge V-belts are especially suitable for drives with high belt speeds and are used in industrial and agricultural machinery. Since they need up to 50% smaller pulley widths than classical sections, this allows for a substantial size reduction in drives. These belts are resistant to oil and heat and are antistatic.

HI-TECH has a range of harvester belts, wrapped v belts and harvester combine v belts for use in Combine Harvesters. These harvester v belts and wrapped v belts belts have been specifically designed for excellent performance under variable speed conditions. Their high tensile strength core caters for very low elongation under load while chloroprene as insulation rubber and wrapping fabric impregnator provide these belts with exemplary friction characteristics along with good oil-resistance and anti-static properties. These harvester belts / harvester v belts and wrapped v belts belts also came in pre set.

Variable speed belts offered by us are uniquely designed using best available techniques and following international quality standards. These are extensively applicable for various drive applications with a speed change requirement. These belts are used to propel a machine which is weighing several tons through a field and can match the speed of the machine that is required for harvest conditions.
These belts are available in various lengths, widths and other specifications, to meet the precise requirements of clients. Integrated with various salient features, these serves as one of the most preferred selections of clients.