Amritsar, Punjab, India
GST : 03AAAFH4640K1ZO
Add Review
Our Products
For high production capacity and increased efficiency as compared to other models. Rolls are mounted on roller bearing for smooth running longer life. The machine is provided with gum tray movement device which becomes operational when gum unit is disengaged from rollers. The machine is recommended to be used on steam heating or thermic fluid heating. App. output of machine is 110 rft/min.
| Size | Motor HP | Steam Req. KG./Hr. | Wt. App. (MT) | Floor Space | Heating Load |
| 42" | 7.5 | 200 | 4.5 | 7.0'x16' | 30 |
| 45" | 9.5 | 300 | 5.0 | 8.5'x16' | 33 |
| 52" | 9.5 | 300 | 5.5 | 9.5'x16' | 40 |
| 62" | 10.0 | 400 | 6.0 | 10'x17' | 47 |
| 84" | 15.0 | 400 | 6.5 | 11'x18' | 47 |
Suitable for cutting the cardboard corrugated board and paper.
Balanced cutting knife enable free cutting with minimum pressure.
Gauge are provided for accurate cutting.
| SIZE | |||
| 42" x 52" | 52" x 62" | 62" x 72" | 72" x 82" |
Three slots and one corner cutting is done simultaneously on this machine. The distance between slotting and corner cutting heads are adjustable with gear and rack mechanism provided with the machine. Two side guages are provided for accurate feeding. Minimum distance between 2 dies is 7" corner width is 3.5"
| Size | Motor HP | Max. Slot Depth | Weight App. (MT) | Floor Space |
| 42" | 3.0 | 18" | 2.2 | 8'x4' |
| 85" | 3.0 | 18" | 2.5 | 9'x4' |
| 95" | 5.0 | 18" | 3.0 | 10'x4' |
Paper Calender Punching
Power driven paper punching machine is specially designed for industrial use of File Making, Paper Punching, Calenders, Sprial Punching/Wiro Punching.
Economy Model
Hydraulic Clamping device is provided telescopic double pressure cylinder with in single pressure knob to adjust the desire clamping pressure.
Main table with all nozzles for easy movement of bulky material. Side Table covered with air nozzles.
Standard Accessories
1. Two cutting knives (one ??tted on the machine)
2. One set of tools
3. Electrical Diagram
| Machine Size | 33" (840 mm) | 37" (940 mm) | 43" (1092 mm) | Max. Cutting Width | 33" (840 mm) | 37" (940 mm) | 43" (1092 mm) |
| Max. Cutting Height | 4½" (114 mm) | 4¾" (120 mm) | 5" (127 mm) | Min. Cutting Width | 1" (25 mm) | 1" (25 mm) | 1" (25 mm) |
| Cuts Per Minute | 25-30 | 20-25 | 20-25 | Main Power Required | 2 HP (3 Phase) | 3 HP ( 3 Phase) | 3 HP ( 3 Phase) |
| Dimension (LxWxH) | 74"x64"x60" | 80"x70"x65" | 87"x76"x68" | Weight Approx. | 1700 Kgs. | 1800 Kgs. | 2000 Kgs. |
This machine is applicable for the square shape of spine similar to perfect bound exercise books. Open books ??at without any damage to spine. Powerful hydraulic pressure which is controlled by PLC based control panel that can be set to desired result.
| TECHNICAL SPECIFICATIONS | ||
| Book Block Width | 710 mm | 810 mm |
| Book Spine (Min.-Max.) | 5.50 mm | 5.50 mm |
| System Clamp Pressure | 6000 kgs | 6000 kgs |
| Squaring Pressure | 2000 kgs | 2500 kgs |
| Electrical Load Motor | 1.5 kva / 2h.p. | 2.25 kva / 3h.p. |
| Nett Weight Approx. | 600kgs | 700kgs |
| Overall Dimensions (W x L x H) | 40"x38"x41" | 40"x42"x41" |
This machine is designed for high production and straight cutting of sheet or two ply corrugated board without damaging ??utes & linear paper. This machine can also be synchronized directly with corrugation machine. PIV chain gear box is provided for adjusting.
| Size | Motor HP | Weight App. (MT) | Floor Space |
| 52" | 2 | 1.9 | 6'x8' |
| 62" | 3 | 2.2 | 7'x8' |
This machine is used for half sticker cutting, creasing cum perforation. This machine is fabricated steel body, paper feed manual. Fully electric panel box, production digital sheet counter. Extra Holder & Cutter available at extra cost.
TECHNICAL SPECIFICATIONS
Size : 24" / 30"
Minimum Cutter to Cutter difference 19 mm
Half HP DC Single Phase
Dimension : 50"x35x50"
(AC drive at extra cost)
Standard Accessories
5 Pcs. Sticker Cutter
1 Pc. Perforation
2 Pcs. Creasing
Three slots and one corner cutting is done simultaneously on this machine. The distance between slotting and corner cutting heads are adjustable with gear and rack mechanism provided with the machine. Two side guages are provided for accurate feeding. Minimum distance between 2 dies is 7" corner width is 3.5"
| Size | Motor HP | Weight Approx. | Floor Space | |
| 3 Rolls | 4 Rolls | |||
| 65" | 0.5 | 500 | 650 | 7'x3' |
| 75" | 0.5 | 600 | 750 | 8'x3' |
| 85" | 0.5 | 700 | 850 | 9'x3' |
| 95" | 1.0 | 800 | 950 | 10'x4' |
D.C. Electric Motor 2 HP Single Phase DC Drive, Thermal Controller Hydraulic Pressure. Also available Plain/Window Lamination.
| TECHNICAL SPECIFICATIONS | |||||
| Size | Film Roll Width | Film Roll Dia | Net Wt. Approx. | Power Required | Speed in Mts. p/h |
| 24" | 24" | 12" | 1000 Kgs | 1 HP | 600 |
| 30" | 30" | 12" | 1100 Kgs | 2 HP | 500 |
| 36" | 36" | 12" | 1200 Kgs | 2 HP | 500 |
