Our Products
We are able to supply Premium Australian Grades of Zircon Sand which has been cleaned over years of Oceanic activities. For Investment Casting we have Premium Coarse Grade of Zircon Sand.
Technical Specification
Element | Line | Concentration |
---|---|---|
ZrO2 | Ka | 52.534 Wt % |
HfO2 | La | 1.038 Wt % |
SiO2 | K | 43.288 Wt % |
Fe2O2 | Ka | 0.046 Wt % |
TIO2 | Ka | 0.304 Wt % |
AI2O2 | Ka | 4.432 Wt % |
We are able to supply Premium Australian Grades of Zircon Sand which has been cleaned over years of Oceanic activities. For Investment Casting we have Premium Coarse Grade of Zircon Sand.
Technical Specification
Physical Characteristics | D97: 110µ |
---|---|
ZrO2 + HfO2 | 66.10 % ± 0.8 |
Total Iron as Fe2O2 | 0.07 % ± 0.03 |
TiO2 | 0.15 % ± 0.03 |
SiO2 (Total) | 32.70 % ± 0.40 |
AI2O3 | 0.60 % ± 0.25 |
P | 0.05 % ± 0.01 |
U | 220 - 260 ppm |
Th | 140 - 220 ppm |
U + Th | 360 - 480 ppm |
Free Silica as Quartz | <0.05 % |
Zircopaque® Flour 325 Mesh Opaque Group also produces flour which is used in various industrial sectors such as: Frits production, Refractory materials, Foundries, Investment casting.
Technical Specification
Physical Characteristics | Particle size |
---|---|
D95: 325 Mesh/44 µ | |
ZrO2 + HfO2 | 65.3% ± 0.6 |
SiO2 | 32.5% ± 0.5 |
Fe2O3 | 0.07% ± 0.01 |
TiO2 | 0.15% ± 0.03 |
AI2O3 | 0.4% ± 0.2 |
A product that models an Opacifier. With increasing pressure on prices of raw materials and decreasing pressure on prices of finished Tiles, Sanitarywares – this product is developed after thorough research to model all properties of regular Opacifier at almost half the cost.
Technical Specification
Physical Characteristics | Particle size |
---|---|
D50: 1.45µ | |
ZrO2 + HfO2 | >26% |
SiO2 | <23% |
Fe2O3 | <0.50% |
TiO2 | <0.60% |
AI2O3 | >40% |
A product developed keeping in mind, Cost conscious customers who need Same whitner as Regular 5 micron at cheaper price.
Technical Specification
Physical Characteristics | Average particle |
---|---|
Size D50: 5.42µ | |
ZrO2 + HfO2 | >45% |
SiO2 | <47% |
Fe2O3 | <0.1% |
TiO2 | <0.1% |
AI2O3 | <2% |
Zircopaque® Premium 5 Micron micronized Opacifier is used in production of glazes, where a high degree of whiteness and covering power is required. Zircopaque® Premium has been chosen by leading Ceramic manufacturers as their standard Opacifier in consideration of its high quality and of the global presence of Opaque in the Indian market.
Technical Specification
Physical Characteristics | Average particle |
---|---|
size D50: 1.45µ | |
ZrO2 + HfO2 | 64.8% ± 0.6 |
SiO2 | 32.5% ± 0.5 |
Fe2O3 | 0.07% ± 0.01 |
TiO2 | 0.15% ± 0.03 |
AI2O3 | 1.20% ± 0.5 |
ZIRCOPAQUE 1.5 micron A special product for Compounds and Glaze application with Extra ZrO2 and finer particles than 5 micron. Superior performance due to extra care taken for consistency and least amount of contaminants.
Technical Specification
Physical Characteristics | Particle size |
---|---|
D50: 1.22µ | |
ZrO2 + HfO2 | 65.8% ± 0.6 |
SiO2 | 32.5% ± 0.5 |
Fe2O3 | 0.07% ± 0.01 |
TiO2 | 0.15% ± 0.03 |
AI2O3 | 1.10% ± 0.5 |
Zircopaque® Superfine 1 Micron has been developed to meet the specific needs of sanitaryware manufacturers who require a finer product for high glossy finish.
Technical Specification
Physical Characteristics | Average particle |
---|---|
Size D50: 1.1µ | |
ZrO2 + HfO2 | 64.3% ± 0.6 |
SiO2 | 32.5% ± 0.5 |
Fe2O3 | 0.07% ± 0.01 |
TiO2 | 0.15% ± 0.03 |
AI2O3 | 2% ± 0.5 |
Zircopaque® Shwet <1 Micron was developed in efforts to enhance quality and utility for our customers which provides better results to our clients in terms of whiteness and glossiness.
Technical Specification
Physical Characteristics | Average particle |
---|---|
Size D50: 1.1µ | |
ZrO2 + HfO2 | 64.3% ± 0.6 |
SiO2 | 32.5% ± 0.5 |
Fe2O3 | 0.07% ± 0.01 |
TiO2 | 0.15% ± 0.03 |
AI2O3 | 2% ± 0.5 |