Welcome to Oxen Batteries
Manufacturer / Exporter / Supplier / Retailer Of ONLINE UPS, Lift Inverter, Solar PCU, Solar Pump Controller, Servo Voltage Stabilizer, Tubular Batteries, Automotive Battery
Manufacturer / Exporter / Supplier / Retailer Of ONLINE UPS, Lift Inverter, Solar PCU, Solar Pump Controller, Servo Voltage Stabilizer, Tubular Batteries, Automotive Battery
When the single battery voltage is between 10.5 V to 12 V, the inverter unit selects the Mains supply line or Solar Power as the source of charging. Even if the Mains supply is available But solar power is strong inv will charge batteries on solar only & The load is connected to the Mains (if present) in this mode Between 12V to 14V, the battery is charged using the Solar Supply (if present), even if the Mains is present. The load is on Mains in this mode. When the battery voltage reaches 14.2V, the unit switches over to the Inverter mode, charging continues from the solar supply and the load gets shifted from Mains to the Battery(the INV ON indicator lights up) , even if the Mains is present (the Mains Indicator starts flashing to show the presence of Mains). The unit is then supposed to have entered into SOLAR ZONE. In this zone, the Solar energy stored in the battery is utilized, saving the electricity At battery voltage 14.2 V, the charging(either from Solar or from Mains) stops, then starts again when it falls down to 13.8V(when Solar present), again stops at 14.2 V. This is the trickle charging operation If Mains supply cuts off during the solar zone, the unit maintains its ���¢�¯�¿�½�¯�¿�½solar-zone���¢�¯�¿�½�¯�¿�½ mode. Therefore, when the Mains supply resumes, the unit continues to operate in Inverter mode and the load is supplied by the battery. When the battery voltage reaches 11.5V per battery during the solar zone, the unit switches back to the Mains Supply, the charging continues from solar supply and the load gets shifted back on Mains Supply When Mains & Solar Power both are not available inv will start working on battery mode When the battery voltage is below 10.5V, the unit enters a shut down
Salient features high inrushpeak current handling capacity pure sine wave output high frequency pwm inverter crystal controlled output frequency compact and well engineered architecture smooth and silent operation superior performance to price analysis. Inverter Technology - IGBT Double Conversion Output Voltage - 400415V AC Three Phase Frequency - 50Hz +0.5Hz WaveForm - PWM Sine wave Harmonic Distortion - Less than 3% on Linear Load Inverter Efficiency - >90% Power Factor - 0.8 Overload - 105% Continuous, 300% for 60 sec Crest Factor - 4:1 Phase Displacement - 120° ± 1 Audible Noise - Less than 45 dB at 1 Meter Display - LCD Meter - R, Y, B Output Voltages, Output Currents, DC Voltage, Battery Voltage LEDALARM - Mains ON, Inverter ON, DC Low, Fault & Output Overload PROTECTIONS - Output Overload & Short circuit, Output Over Voltage, DC Under & Over Voltage, Input Under & Over Voltage, Single Phasing
Uses solid state control circuits, no relays, no warm-up time, for high reliability. High Correction Speed. Quick response time 10 milli sec (half a cycle). Excellent regulation as high as ± 1%. Professional grade ICs and components are used for high reliability. Introduces zero wave-form distortion. Unaffected –by load power factor. Ruggedised construction. Very high efficiency above 95%. Very low No Load losses.
Share your thoughts with other customers for Oxen Batteries
Add Review
