Bangalore, Karnataka, India
Our Products
Air separation column (cold box) consists of outer steel casing, Main heat exchangers, Bottom column, Top column, Condensor, Sub-coolers, Liquid nitrogen Tank. Expansion Valves, Drain & Analysis Valves, Niddle Valves Insulation material, Digital electronic temperature indicator & scanner, PT 100 sensors, Differential Pressure level Indicator.
The expanded air leaving from the Expansion Engine & Air Expansion valve enters Air Separation Unit. The rich liquid containing Oxygen & Nitrogen is collected in Lower column having more than 40% O. The rich liquid from the lower column is taken to the upper column through RL Expansion Valve. The Poor Liquid (PL) collected on the bottom cone of Condensor is taken to upper column through PL Expansion Valves in this process pressure is dropped 4.5 kg/Cm to 0.5kg/Cm g in upper column . The Nitrogen being more volatile come out and oxygen getting condensed and collected in condenser from where it is pumped by LO/LIN Pump in to cylinders.
We offer online, digital, electronic analyzers with mounting & portable type for monitoring purities of Oxygen, Nitrogen, Argon and other gases. This indicator is a convenient and handy instrument for field applications where a quick, easy and accurate measurement of purity of oxygen is required. The sensor being located within the instrument, requires the gas sample to be delivered to inlet port. This instrument is ideal where the sample is available at a slight positive pressure.
Oxyplants India Pvt. Ltd. offers a full line of liquid transport tanks for liquid oxygen (LOX), liquid nitrogen (LIN), liquid argon (LAR) and liquid carbon dioxide (CO2) service. Tanks are produced to store the inner gas, at -196 C or at a less temperature, depending on different design parameters. The tanks are manufactured in India As a design standard it is used CODE 2002, EN 13458, EN 13530, ADR 2009 and ASME Section VIII Division 1 and CGA-341 codes and standards. It is also possible to design products in different standards according to the requests of customers.
Cryogenic Liquid Transportation Tanks are used for the storage and transportation of the gases in liquid form. These Tanks are produced to store liquid and gas according to the pressure condition requests of the customers. The inner tank is made out of stainless steel 304L (X5CrNi18-10 AS PER DIN 10028-7 OR EQU) & design code EN 13530 - 2002, while the outer one is made out of CARBON STEEL & design code EN 13530:2002. The isolation between tanks is provided by super insulated by vacuum technology. The manufacturing processes of the tanks are as follows: Tanks are produced to store the inner gas, at -196 C or at a less temperature, depending on different design parameters. LIN, LOX, and LAR Liquid Transportation Tanks capacities range from 300 gallons to 10, 000 gallons (30 tons).
Oxyplants India Pvt. Ltd. offers a full line of Cryogenic pumps for Oxygen/Nitrogen/Argon Liquid from the cryogenic tank is compressed to high pressure in a cryogenic liquid pump. It is then vaporised in an ambient air vaporiser to produce gaseous oxygen/Nitrogen/Argon. The high-pressure gas then can pass into cylinders via the gas manifold or fed into a customer's product pipeline.
Oxyplants India Pvt Ltd are manufacturer & Exporter of Oxygen Gas Plant Equipment's and Spare parts for Allied Machineries. We are a reputed and esteemed supplier of spare parts for Oxygen Gas Plants in India as well as overseas. Our products include wide range of Spares parts for Oxygen Gas Plants.
AIR COMPRESSOR
Oxyplants India Pvt Ltd supplies air compressors used in oxygen gas plants. It is a double acting multi stage horizontal cross head type built in one, two or three rows. The compressor is driven by electric motor through V-belts or direct drive .Air compressor has inter coolers between two stage. The discharge pressure in this air compressor is 35-40 Kgs/Cm depending on the plant condition and requirements.
Oxyplants India Pvt Ltd. Supplies High Pressure Seamless industrial gas cylinders & medical gas cylinders for different types of gases. We supply High Pressure Seamless industrial gas cylinders for gases like nitrogen, oxygen, argon, xenon, krypton and neon. Also supply Allied Equipments for these cylinders and their spare parts. We are a reputed and esteemed supplier for these cylinders and there spares in India as well as overseas.
We supply cylinders INDIGENOUS, EMPTY, SHPCL MAKE, BRAND NEW, HIGH PRESSURE SEAMLESS STEEL GAS CYLINDERS, concave bottom, cylinder as per IS: 7285-(PART-1 & PART -2):2004 with Neckring only, *Valve as per IS:3224, painted as specified under Gas Cylinder Rules 2004 and supported with Manufacturer's Test Certificate and Approval from the Chief Controller of Explosives, (PESO)
We supply cylinders water capacities ranging from 5 to 50 liters, OD from 108 mm to 232 mm and working pressure from 150 Kgf/cm to 200 Kgf/cm. Our cylinders are inspected/certified by Bureau of Indian Standard (B.I.S) and are approved by the Chief Controller of Explosives Dept- Govt of India. For export, our cylinders are inspected and approved by 3rd party inspection agencies such as BVQI/TUV or SGS.
We supply complete spares for these cylinders like:
A hydrostatic test is a way in which gas cylinders can be tested for strength and leaks. The test involves filling the vessel or pipe system with a liquid, usually water, which may be dyed to aid in visual leak detection, and pressurization of the vessel to the specified test pressure. Pressure tightness can be tested by shutting off the supply valve and observing whether there is a pressure loss. The location of a leak can be visually identified more easily if the water contains a colorant. Strength is usually tested by measuring permanent deformation of the container.
Hydrostatic testing is the most common method employed for testing Empty Cylinders. Using this test helps maintain safety standards and durability of a cylinder over time. Newly manufactured pieces are initially qualified using the hydrostatic test. They are then re-qualified at regular intervals using the proof pressure test which is also called the modified hydrostatic test. Testing of Cylinders for transport and storage of gases is very important because such containers can explode if they fail under pressure.
The Cold air from the cascade cooler & chilling tank is partly free from moisture, Oil & Oil Vapors. The separation of moisture is carried out in different stages so that the air entering in the molecular sieve battery has minimum moisture level & better adsorption of CO can take place. The Molecular Sieve Battery thus completely removes the moisture & CO from the air passing through it. If the battery does not function efficiently the moisture & CO will enter into Air Separation Column and Moisture will become Ice & CO will become Dry Ice form which will choke the Expansion Valves, heat exchanger tubes and other equipment's resulting in the stoppage of the Plant.
We Supply Complete Range of Spares for Molecular Sieves Battery including:
It is a single acting, Single Cylinder, Horizontal Type, Non Lubricated, Reciprocating Pump, Pumps liquid Oxygen & gasifies in heat exchangers for final filling as gas in cylinders at a pressure of 150 kg/cm2 g.
Liquid Oxygen Pump when is Started, the liquid oxygen from the main condenser enters the outer jacket of the pump. Some of this liquid evaporates due to heat produced in pumping and the vapour is passed to the upper column as gas. The major part of liquid oxygen is taken into the pump cylinder and then compressed out by the piston Forward stroke. This high pressure liquid oxygen passes through two non-return valves into the heat exchangers, Gasified and filled in to cylinders through Filling Manifolds.
We supply Complete Range of Spares for LOX Pump of all capacities are per customers requirement including
Oxyplants India Pvt Ltd. Supplies asbestos-free acetylene cylinders are safe, light and user-friendly. These Cylinders have unique porous mass filling ensures a consistent gas release for all acetylene applications. Also supply Allied Equipments for these cylinders and their spare parts. We are a reputed and esteemed supplier for Acetylene cylinders and there spares in India as well as overseas.
Cryogenic Liquid Transportation Tanks are used for the storage and transportation of the gases in liquid form. These Tanks are produced to store liquid and gas according to the pressure condition requests of the customers. The inner tank is made out of stainless steel 304L (X5CrNi18-10 AS PER DIN 10028-7 OR EQU) & design code EN 13530 - 2002, while the outer one is made out of CARBON STEEL & design code EN 13530:2002. The isolation between tanks is provided by super insulated by vacuum technology. The manufacturing processes of the tanks are as follows: Tanks are produced to store the inner gas, at -196 C or at a less temperature, depending on different design parameters. LIN, LOX, and LAR Liquid Transportation Tanks capacities range from 300 gallons to 10, 000 gallons (30 tons).
We supply complete spares for these cylinders like:
Oxyplants India Pvt. Ltd. offers a full line of cryogenic liquid storage tanks for liquid oxygen (LOX), liquid nitrogen (LIN), liquid argon (LAR) and liquid carbon dioxide (CO2) service. Tanks are produced to store the inner gas, at -196 C or at a less temperature, depending on different design parameters. The cryogenic storage tanks, pressure vessels, and vaporizers are manufactured in India As a design standard it is used CODE 2000, EN 13458, EN 13530, ADR 2009 and ASME Section VIII Division 1 and CGA-341 codes and standards. It is also possible to design products in different standards according to the requests of customers.
The cryogenic tank consists of two tanks Outer & Inner Tank. The inner tank is made out of stainless steel 304L (X5 CrNi 18-10) & design code EN13458, While the outer one is made of CARBON STEEL & design code EN13458. The gap between tanks is filled with Perlite aggregation and super insulation by vacuum technology. The manufacturing processes of the tanks are as follows: Tanks are produced to store the inner gas, at -196 C or at a less temperature, depending on different design parameters. LIN, LOX, and LAR cryogenic storage tank capacities range from 300 gallons to 80, 000 gallons (50 tons). Vaporizers are also available in a wide range of capacities - from 700 SCFH (20 Nm3/h) to 35, 000 SCFH (1000) Nm3/h per unit. Also supplies Liquid CO2 storage tanks in sizes holding 3 to 50 tons of products.
Oxyplants India Pvt. Ltd. offers a full line of Dura liquid cylinder. The Dura liquid cylinder is designed to transport, store and deliver oxygen, nitrogen, argon, as a cryogenic liquid or gas. Dura cylinders are vacuum and super insulated vertical type liquid cylinders with in-built vaporizer which allows storage of cryogenic gases like oxygen, argon, nitrogen, medical oxygen at a very low temperature ranging From -183deg c To -196 deg c. The Dura Liquid Cylinders are manufactured in India As a design standard it is used CODE DOT4L, EN 13458 and ASME standards. Dura Cylinders are low pressure liquid cylinders provide the longest holding time, lowest evaporation rate, highest gas-withdrawal rate and best life-cycle cost.
Dura Liquid cylinders Tanks are produced to store liquid. The inner tank is made our of Stainless Steel 304L(SA240 TP304) & design code DOT4L. While the outer one is made out of stainless steel 304L (AISI304) & design code CGA-341, Ed.2007 . The common application for this liquid cylinder is to provide gas at pressures around 300 psi (20.7 BAR). The Dura Liquid Cylinder will build and maintain pressure at the control regulator setting of 300 psi (20.7 BAR). If the pressure exceeds 300 psi (20.7 BAR) the control regulator will supply gas from the tank vapor pressure. A continuous gas flow can be automatically provided from these cylinders.
Freon based Industrial Refrigerant type Chilling Unit With Thermostatic Cooling Coils. Chilling Water Tank with 2 Air Coils for Cooling of the process Air to 10 Deg. C to 12 Deg. C before it Enters Molecular Sieve Battery and longevity of the Molecular Sieves. With air coils fitted inside of circular tank with cover and base mounted on the skid. This unit has got a Freon evaporation coils fitted inside the tank with inlet and outlet connections connected to a Freon unit of packaged type design with sealed compressors Copland Make, Danfoss Controls Expansion valve and digital indicator. Factory fitted on skid with pipelines.
We are the main supplier of this product.
We are the main supplier of this product.
