We are a reliable Manufacturer, Exporter and Supplier of high quality Isolation Control Unit (Vibro-JR). With a full-fledged manufacturing unit equipped with latest technology, we make sure that all industry standards are followed. Easy to use, Isolation Control Unit requires less maintenance. You can purchase cost-effective Isolation Control Unit from us.

Details :

• Anti-vibration rubber mount Vibro-JR is an advanced vibration isolation system for raised concrete floating floors.
• Vibro-JR consists of a metal shell that contains the anti-vibration polyourethane elastomer Regufoam properly designed to absorb the vibrations.
• It’s very easy to install, allows regulation of height and it is not necessary to use remaining plywood forms.
• Also creates a favourable air gap, which is beneficial also for the airborne sound insulation additionally to the anti-vibration capabilities.
• Vibro-JR is available in three different Regufoam densities in order to match each application needs.
• Additionally the thickness of Regufoam can vary in order to achieve the required natural frequency of the anti-vibration system.
• It is equipped with an innovative system to lift the floor through a special nut, which can be raised using the adjustment key provided by us.
• It is also equipped with adequate side slots in order to restrain and hold the metal reinforcement before pouring the concrete for a complete anti-vibration solution for floating floors.

Used as pressure loaded spring element, Anti Vibration Sheets (Regufoam) is highly cherished for low natural frequency and high resilience. We are a prominent Manufacturer, Exporter and Supplier of high performance Anti Vibration Sheets at reasonable prices. We are capable of delivering quality assured Anti Vibration Sheets within the set time frame.

Details :

• Regufoam® is a mixed cell polyurethane elastomer produced in six different hardness grades or densities with combined spring and dampening properties.
• The different material densities are color coded.
• The numbers in the type designations of regufoam 150, 220, 300, 400, 510, 680 correspond to the material density in kg/m3.
• Regufoam® is mainly used as pressure loaded spring element in building engineer, civil engineering and track construction.
• Regufoam® has an extremely low natural frequency in the corresponding load ranges, resulting in high soundproofing values.
• In addition, Regufoam® shows very low spring deflection and high resilience.
• Its cellular structure guarantees extensively full surface transmissions of forces under static and dynamic weight loads.
• The value for maximum permanent load for Regufoam® with static tension is at the transition point between linear spring deflections of the material to degressive spring deflection with increasing load.
• The range of linear spring deflection is ideal for permanent static loads.
• The maximum value for static permanent load for the individual Regufoam® type varies between 0.010 and 0.4 N/mm2.

The Anti Vibration Hanger (Vibro QH-R) offered by us, with its precise fabrication utilizing best of materials and technology, effectively combats structure-borne noise and vibration. Our engineers strictly comply with the industry norms while designing them. One can acquire it from us in different specifications at nominal prices. We are India-based Manufacturer, Exporter, and Supplier providing Anti Vibration Hanger (Vibro QH-R) in global markets.

Details :

• Anti-vibration hangers for gypsumboard celings with Regufoam®
• Sound Insulation For False Ceilings
• Quick & Easy Connection with the metal profile of gypsum board ceiling systems.
• Vibro QH-R consist of a specially designed galvanized metal suspension hanger, which has grabbling nebs for quick and easy connection with the standard ceiling profiles with dimensions 60x27 mm (for false ceilings) according to DIN 18182-1.
• Therefore the working cost is decreased and the work of the installer is facilitated.
• The elastic element of the Vibro QH-R hanger is high technology polyurethane foam, with semi-closed cells, with the trademark Regufoam®. Full range of its mechanical behavior diagrams and certificates, which were conducted at the University of Dresden, are available upon request.

• Vibro QH-R is available with two different thickness of its elastic pad :
  • 12 mm (the economical solution)
  • 24 mm (better vibration control)

Load Range :

• 10 - 20 kp* per mounting point.
• *1 kp = 10Ν

Highly appreciated for adaptability, Anti Vibration Sheets (Regupol) are 100% eco-friendly and efficient. We have earned the trust of our client for manufacturing, exporting and supplying high grade Anti Vibration Sheets made in accordance with quality standards. You can purchase durable Anti Vibration Sheets from us at competitive prices. Prompt delivery is our forte.

Details :

• Regupol® is the material from which BSW GmbH manufactures a wide variety of materials for vibration insulation for the building and construction industry.
• Regupol® consists of a number of different grained recycled cellural polyurethane-bound rubber granulates glued together with polyurethane glue.
• Regupol® products advantages include that they are highly adaptable, longevity, they can bear high-level loads and are 100% recycled.
• Object-specific, individual production as well as customer-specific finishing, packaging and storage ensure rapid application-specific solutions.
• Ensures efficient application of specific solutions.

Using latest technology, our diligent professionals manufacture, export and supply high grade Isolation Control Unit (Vibro Band). Made in accordance with all quality standards, Isolation Control Unit is highly appreciated in the market for high performance and long service life. We are distinguished from our competitors for our competitive prices and timely delivery of all orders.

Applications : Vibro-BAND is used as an anti-vibration intermediate band between skirting boards and the floating wooden floors. By using Vibro BAND, sound and vibration passage through the skirting is prevented.

Description :

• The anti-vibration profile Vibro-band is produced of special synthetic rubber.

• Its innovative design ensures :
  • Easy installation.
  • Prevention from possible sound - bridge.
  • Waterproofing of the floor.
  • Firm installation between skirting-board and wooden parquet.

• It is a necessary accessory in wooden nailed floors, when used with the anti vibration mounts Vibro-FM or Vibro-FS in order to prevent lateral transmitted vibration.

We are a celebrated Manufacturer, Exporter and Supplier of Spring Mounts (Vibro-MSH) from Tamil Nadu, India. We are backed by a team of skilled and experienced personnel who makes use of top-notch quality metal that is durable and non-corrosive. As far as the cost is concerned, the Spring Mounts are provided by us at the modest prices.

Details :

• Vibro-MSH is an antivibration mount with multiple springs for very heavy equipment
• It is specially designed to absorb low frequency vibrations (i.e. reciprocating machines)
• Additionally the special design profile of its rubber base, acts as a sound break and increases the isolation efficiency in high frequencies that could be transmitted through the springs
• The springs are fixed with an innovative fastening system to the metal base

The Isolation Control Unit (Vibro-WB) manufactured, supplied and exported by us is a huge hit amongst the worldwide audience. Abiding by the industry standards, we precisely engineer these Isolation Control Units employing state-of-the-art technology. One can even get them customized on special request. We always execute prompt deliveries by selecting appropriate shipment modes. Contact us to fetch lucrative deals!

Details :

• Isolated walls are a very critical aspect in order to prevent vibration transmission in a building application.
• Floating walls with vibration isolation products are often used in music studios, home cinemas and overall acoustically sensitive areas. In a floating wall construction, It is important that the walls of the space are isolated from the building's structural elements.
• Vibro WB wall braces contribute in fully isolating an acoustically sensitive space, by preventing vibration transmission and sound bridges.  If the wall requires lateral support, anti-vibration wall braces will be required.
• VIBRO vibration isolation products offer a complete range of solutions which can isolate most wall types, primarily drywall. A large range in wall weights can be accommodated and customized solution can also be carried out.

Using our rich industry experience, we manufacture, export and supply precisely designed Silicone Vibration Isolators (Vibro SiL-EM.3) that can work in harsh weather conditions. Complying by all quality standards, we are trusted by our client for supply high performance Silicone Vibration Isolators at reasonable prices. Owing to our efficient distribution team, we deliver all orders on time.  

Details :

• The silicone anti-vibration metal - rubber mounts, Vibro.SiL-EM.3 can offer high vibration protection for compressors, pumps, fans, exhaust gas pipes / muffler support, sensitive electronic equipment, in avionic, marine, military and medical applications, where a wide temperature range (-40 to +200°C) occurs.
• Suitable also for food-industry applications (bakery ovens, refrigeration rooms etc).
• The advanced design of Vibro.SiL-EM.3 is a result of specialized research and it is made by a high quality silicone polymers.
• Provides an effective shock and vibration isolation protection, much higher than natural rubber and thermoplastic compounds.
• It can achieve a large deflection capacity and a low resonance point.
• Silicone polymers offers very good weathering properties, ozone UV resistant, ideal for out-door use.
• Suitable for frost and snow conditions.
• All the metal parts are covered by silicone rubber, providing an oxidation protection.
• Silicone gel is softer than natural/viscoelastic rubber and others thermoplastic compounds.

We cater for the global market with high-performance Spring Mounts (Vibro-AMR). We are enlisted with the top-notch Manufacturers, Exporters, and Suppliers of Spring Mounts (Vibro-AMR) from Tamil Nadu, India. From designing to development and quality assurance, we conquer each stage and succeed in coming up with flawless products.

Details :

• The new product load range starts from small weights (15 kp) and can go up to 150 completing the anti-vibration product range for restrained mounts.
• The housing of Vibro-AM.R is designed to limit vertical and horizontal movement of the isolated equipment and offers a seismic protection.
• VIBRO AMR spring isolator offers protection in all directions and is a complete anti-vibration spring mount that can be primarily used for low frequency vibration isolation.
• That is most commonly used for vibrating machinery of low speed rotation (on 400 rpm upwards).
• It is mostly used in applications that require a spring isolator with lateral and vertical anti-vibration restrain.
• VIBRO AMR offers additional protection from earthquakes and excess wind pressure, such as air compressors, two-cycle engines, chillers, water coolers, air handling units etc.
• The rubber profile at its base acts as a sound break and increases the isolation efficiency in high frequencies, which could be transmitted through the springs (optional).

Field of applications :

• Vibro-AM restrained is recommended to be used for mechanical Noise & Vibration isolation for :
• Vibrating equipment is likely to be subjected to seismic events
• When the vibrating equipment is likely to significant center of mass alternations
• When high wind loads or other external forces are applied.

Quality, performance and durability in highest terms define our Isolation Control Units. Our adroit team employs perfect combination of technology and components in their designing. We offer them across the globe at marginal prices. With aid of efficient shipping and logistics services, every order is fulfilled before deadlines. No wonder, we are ranked amongst chief Manufacturers, Suppliers and Exporters of Isolation Control Unit (Vibro-WS) in India!

Details :

• Vibro-WS is a specially designed homogeneous rubber support systems for gypsum board partitions.
• The semi-cylindrical modulation at their base (for WS.75 & 100) and the transversal holes (for WS.50), provides the necessary space for the rubber expansion to increase the deflection and consequently the vibration insulation.
• The inclined flaps of Vibro-WS cover the fixing bolts on the base and prevent possible contact with gypsum board.

• The application of Vibro-WS in floating gypsum board partitions :
  • Decreases the flanking noise transmissions.
  • Interrupt the heat-bridges and the increase of moisture between humid floors and walls.

Spring Mounts (Vibro-MSV), which roll off our manufacturing units, stand high in efficiency and quality. They are known for their high performance and long service life. Their quality is ensured to match the desired level by our team of quality controllers. We are standing amid the notable Manufacturers, Exporters, and Suppliers of Spring Mounts (Vibro-MSV) from Tamil Nadu, India.

Details :

• Vibro - MSV is an anti-vibration spring mount with viscous damping for increased vibration isolation and very low natural frequency.
• Vibro-MSV is an anti-vibration mount with multiple springs.
• It is specially designed to have low height and is very effective with low frequency vibrations due to the viscous material.
• The elastic base acts as a sound break and increases the isolation efficiency in high frequencies, which could be transmitted through the springs.
• Vibro-MSV is used for vibration control of machinery mounting with low excitation frequency, with amplitude variation, due to varying speeds of rotating machines.
• That is primarily useful in HVAC, mechanical and industrial applications that require vibration isolation.
• This mount is specially designed to absorb low frequency vibrations and restrict the excited motion and shock of perturbing vibrations at resonance point.
• The springs are fixed with an innovative fastening system to their metal base.
• The silicon fluid, filled with appropriate viscosity in different centistokes rate, can provide damping forces in all directions of freedom.
• The rubber base (upon request) acts as a sound break and increases the isolation efficiency in high frequencies, which could be transmitted through the metal structure of the springs.
• Vibro-MSV is recommended for heavy loads.

We make available the finest Spring Mounts (Vibro-MSR) to various industries across the globe. We are counted among the eminent Manufacturers, Exporters, and Suppliers of Spring Mounts (Vibro-MSR) from Tamil Nadu, India. The designs of the devices are innovative, and they are finished to perfection. They are tested on all crucial parameters such as functioning, quality, life, etc. Count on us!

Details :

• The new product in the spring mounts category offers a load range starts from small weights (50kp) and can go up to 750 per mounting point completing the anti-vibration product range for restrained mounts.
• The housing of Vibro-MS.R is designed to limit vertical and horizontal movement of the isolated equipment and offers a seismic protection.
• Vibro-MSR is a vibration control mount with multiple springs that can offer multi-directional restrain.
• It can be used at low frequency vibration control applications (low speed rotation 400 rpm upwards) for heavy load machinery where lateral and vertical support and protection from earthquakes and excess wind pressure is needed.
• Typical applications are air compressors, two cycle engines, chillers, water cooling towers, air handling units etc.
• The spring isolator Vibro-MSR with its innovative design can offer simultaneously seismic control protection, successfully sustaining of wind pressure lateral forces and at the same time, reduce the transmission of vibration to supporting structures.
• The rubber profile at its base, acts as a sound break and increases the isolation efficiency in high frequencies, that could be transmitted through the springs (optional).

Field of applications :

• Vibro-MSR restrained is recommended to be used for mechanical noise & vibration isolation for :
• Vibrating equipment is likely to be subjected to seismic events
• When the vibrating equipment is likely to significant center of mass alternations
• When high wind loads or other external forces are applied

Spring Mounts (Vibro-MS) are high-quality devices that are made obtainable without any flaw. Their efficiency and fineness makes them stand out from the lot available to the market. We are referred to as the leading Manufacturer, Exporter, and Supplier of Spring Mounts (Vibro-MS) from Tamil Nadu, India. We ensure that our products last long, proving themselves even under trying conditions.

Details :

• Vibro-MS is an anti-vibration mount with multiple springs.
• It is specially designed to have low height (type L) and is very effective with low frequency vibrations.
• The special elastic base acts as a sound break and increases the isolation efficiency in high frequencies, which could be transmitted through the springs.
• The springs are fixed with innovative fastening system.

Our company is engaged in offering high quality Silicone Vibration Isolators (Vibro SiL Mini) to our esteemed customers. Using pioneering technology, we manufacture, export and supply smooth working Silicone Vibration Isolators with long service life. You can purchase durable Silicone Vibration Isolators from us at competitive prices.  We are capable of delivering all orders within the stipulated time frame.

Details :

• The Vibro.SiL product series based on silicone gel shock absorbers with silicone grommet, is a new high-technology impact vibration isolation product series developed by our company's R & D department.
• Vibro.SiL silicone gel product series contain anti-vibration products made of high quality silicone that can be applied in a wide operating temperature range.
• Specifically they are fully operative from -40 to +200°C, providing stable vibration isolation performance.
• They provide an effective shock and vibration isolation protection in weather condition that natural rubber or other thermoplastics would not be able to perform in extreme temperatures and weather conditions.
• They are environmentally friendly as they do not contain harmful additives. Silicone pads offer very good weathering properties in regards to ozone and UV resistivity.

Description :

• The silicone gel mounts Vibro.SiL-mini can offer vibration protection for compressors, pumps, fans, muffler hanger, on-board computers and other sensitive electronic equipment, in avionic, military and medical applications where a wide temperature range (-40 to +200°C) occurs.
• The silicone gel mounts Vibro.SiL-mini due to silicone provides an effective shock and vibration isolation protection, much more than natural rubber and thermoplastic compounds that would lose their deflection in extreme temperatures and weather conditions.
• It can achieve a large deflection capacity and a low resonance point even in extreme . It is an ideal selection for mid and low frequency excitation.
• It offers very good weathering properties, ozone, UV resistant, ideal for out-door use.
• Silicone gel pads offer better shock protection because they are  softer than traditional rubber and thermoplastic compounds achieving greater deflection in small loads.

Manufacturing, supplying and exporting of Isolation Control Unit (Vibro-FM) helped us occupy an eminent position in the global markets. The reason is the application-specific design and long-service life of these Isolation Control Units. We properly examine them on industry-stated parameters before dispatch. Moreover, the prices quoted by us are acknowledged to be market-leading. We always prioritize to deliver within prescribed time frame.

Details :

• Impact Noise Reduction
• Wooden Floors
• Improved Sound Insulation Of Light Partitions

Α new insulation system, the floor pad isolator Vibro-FM, has been developed to reduce the impact noise of wooden floors. Impact noise refers to sound produced when a short duration impulse, such as a footfall, acts directly on a structure. The Vibro-FM pads are useful for the reduction of noise coming from upstairs to down stairs. Also, they are useful for improvement of insulation of light weight partitions.

Description : Vibro-FM is produced based on a deep research in National Τechnical Uniνersity of Αthens.The floor pads consist of metallic and elastic parts which are connected accordingly and as a result it prevents the creation of acoustic bridges. The elastic part consists of a specially designed non aging material providing maximum sound insulation. The metallic parts are protected by a special anticorrosion treatment.

Acoustic Tests : An exceptionally high WEIGHTED ΝΟRΜΑLΙSΕD IMPACT SOUND PRESSURE LEVEL (Ln'w = 53 dB) was measured at the Acoustic Laboratory of National Technical University of Αthens in accordance with International Standard ISO 140-6 and ISO 717-2. It should be noted that it was measured without the use of the pads Ln'w and the value was 66dB. Therefore a remarkable reduction of 13dB can be achieved whilst using the Vibro-FM pads.

We have garnered a reputation in Indian and international markets for manufacturing, supplying and exporting the top-tier Isolation Control Units (Vibro-FS) at affordable prices. Keen designing, thorough screening and meticulous packaging by our dexterous team ensures the highest quality standards of these Isolation Control Units. Further, we are well-equipped to cater even bulk order requirements within stipulated time.

Details :

• Impact Noise Reduction In Wooden Floors
• Vibro-FS is a specially designed homogeneous rubber support system.
• The semi-cylindrical modulation at its base increases the deflection, thus improving the vibration absorption.
• 80 kp* per mounting point.

Spring Mounts (Vibro-SM) are made of high-grade materials and components and are set in conformity to the international standards. They are highly functional devices that are doled out quality tested. Their durability and longevity brackets them with the desirable Spring Mounts of such type. We are emerging as the promising Manufacturer, Exporter, and Supplier of Spring Mounts (Vibro-SM) from Tamil Nadu, India.

Features :

• Suitable for low-frequency vibration control
• Adjustable height and machine alignment
• Protection from lateral displacement
• Internal elastic gasket for reduction of resonance
• Steel casing for greater strength

Vibro-SM TYPE 1 :

• Anti-vibration mounts Vibro-SM are used for low frequency vibration control (rotational machinery 300 RPM upwards).
• The casing is made of steel with adequate thickness and is protected from oxidation with a special anticorrosive paint.
• The anti-vibration springs comply with ISO.EN.10270 standards and have a color indication to define the maximum load capacity.
• An adjustable height system exists, in order to align the machine.

Vibro-SM TYPE 2 :

• At their base, they have a special elastic profile, resistant to outdoor conditions, thus offering better isolation efficiency at high frequencies.
• Anti-vibration mounts Vibro-SM have been designed to face lateral forces (earthquake and wind-pressure protection).
• An elastic gasket is interceded between the two vertical reinforcements, to avoid creating a sound-bridge.
• Also through the friction that is developed, the phenomenon of resonance is decreased, during the beginning and the end of the machine operation.
• Vibro-SM can be combined at the bottom with an elastic pad, named Vibro-EP, to ensure the control of vibration at a wider range of frequencies (Vibro-SM Complex).

Our Spring Mounts (Vibro-AM) are easy-to-install devices that are reckoned suitable for low-frequency vibration control. They are passed through stringent quality tests before making them available to the global market. We are grouped with the premier Manufacturers, Exporters, and Suppliers of Spring Mounts (Vibro-AM) from Tamil Nadu, India. We can entertain the demand for customization.

Details :

• At their base, the anti-vibration spring mounts Vibro-AM have a metal plate with adequate thickness and a special elastic profile, resistant to outdoor conditions, thus offering better isolation efficiency at high frequencies.
• Both the metal plate and the elastic profile have two holes for fixing with pass-through bolts at the base of the spring mount.
• At the upper part of the spring mount, there is a M8 bolt for adjusting them to the machinery.
• The spring complies with the requirements of ISO EN 10270.

Applications : Antivibration spring mounts Vibro-AM are used for low frequency vibration control (slow speed rotation 400 RPM upwards) such as compressors, two-cycle engines, coolers, air handling units etc

The Antivibration Elastic Pad with Metal Cover that we make available is precisely developed using sophisticated machines. Our Rubber Mounts (Vibro-EP Metal) is extensively demanded due to its features of easy installation, machinery fixing capability, longer service life and unmatched quality. One can purchase antivibration machinery support from us at competitive prices. Place order with us-you won’t be disappointed!

Details :

• Vibro-EP Metal consists of an elastic element (dimensions 12.5x12.5 cm) and a specially formed galvanized metal cover
• The intercession of the steel covers between the base of the machine and the elastic, this ensures that the equable distribution of the load to the entire surface of the elastic element
• At the same time the cover protects the rubber from the solar radiation
• At the centre of the upper side of the cover an internal M12 thread is incorporated, which accepts the corresponding fixing screw (not included)
• The beige, green and yellow elastic pads are made of Neoprene type of rubber

Applications : Anti-vibration supports : Air-compressors - Cutting machines - Printing machines - Fans - Air conditioner units etc.

Dimensions :

• Elastic Element dimensions : 12.5x12.5x2.5 cm
• Total height : 2.8 cm
• Internal thread : M12

To get the world-class Anti Vibration Hanger (Vibro CH-R), come to us! We are amongst its leading Manufacturers, Suppliers and Exporters not only in India but around the globe. The folks at our production unit design this Anti Vibration Hanger such that it delivers high quality solution that match or exceed your desired performance requirements. For availing them at competitive price, contact us.

Details :

• Anti-vibration hanger with Regufoam® is available in 4 different thicknesses, which can alternate the natural frequency achieved in each project.

• It can be used for :
  • Anti-vibration suspension of machinery (ventilators, air conditioning e.t.c.)
  • Suspension of sound insulation false ceiling (gympumboard).
  • Anti-vibration suspension of pipes, air – ducts.

• The frame of Vibro CH-R is galvanized metal. The precisely designed incisions provide easy bending of its frame, at certain shapes, that can be achieved by the force of a single hand. Therefore, Vibro CH-R can be easily transformed into 4 different shapes, in order to help the installer to use it in the most favorable form.
• It can be used in the following forms :
• Pattern (1) screwed on both sides of the metal suspension’s profile.
• Pattern (2) is fixed with 2 anchors on the ceiling.
• Pattern (3) is fixed with 1 anchor on the ceiling.
• Pattern (4) hanged up with a hook or other proper device.
•  The elastic element of the hanger is high quality polyurethane foam with semi-closed cells, this is manufactured by BSW, a German company with the trademark Regufoam®. Full range of its mechanical behavior diagrams and certificates which were conducted at the University of Dresden are available upon request.
• Vibro CH-R is available with four different thickness of its elastic pad, achieving different natural frequency
• 12 mm (Natural Frequency 17 Hz)
• 24 mm (Natural Frequency 12 Hz)
• 37 mm (Natural Frequency 9.5 Hz)
• 50 mm (Natural Frequency 8 Hz)

Our range of Anti Vibration Hanger (Vibro-HH) is synonymous to heavy-duty performance! We maintain tight quality controls while sourcing, manufacturing and distribution in order to give 100% quality Anti Vibration Hangers to our customers at cost-effective prices. We are even listed amongst the top Manufacturers, Suppliers and Exporters of Anti Vibration Hanger (Vibro-HH) in India and overseas.

Details :

• Heavy duty spring and rubber Anti-Vibration Hangers can be used in applications with increased total weight and limited hanging points.
• In those applications, a heavy duty anti-vibration hanger needs to be used in order to be able to sustain the increased weight, while acting as an adequate spring vibration isolator.
• That offers a low natural frequency and increased vibration isolation.
• The frame of Vibro-HH is made from galvanized metal sheet or metal with painted finish.
• The Suspension Screw/rod can vary depending on the project requirements and is not included in the product.
• The acceptable rod misalignment up to 30° arc, without contacting the metal frame
• The elastic element of the hanger is high quality polyurethane vibration isolation foam, with semi-closed cells, manufactured by the German company BSW under the trademark Regufoam Vibration Plus®.
• Vibro-HH can be supplied with a pre-loading kit (rubber & metal washer) upon request.
• Additionally, different types of hanging endings can be used in order to match the exact project requirements.

We are one of the reputed Manufacturers, Suppliers and Exporters of Isolation Control Unit (Vibro-JS) globally. Our Isolation Control Unit is designed utilizing advanced means and techniques that strictly complies with industry norms. Moreover, they easily compromise with buyer’s specifications to exactly fit in their projects. It will assuredly yield you true value for money. With aid of efficient logistics partners, we are set to deliver on time.    

Details :

• Jack up-anti-vibration mount for concrete floating floors
• Suitable for raised concrete floating floors.
• Regulation of height.
• Avoid remaining plywood forms.
• Monitoring and easy replacement of spring.
• Combination of spring and rubber, for better acoustical results.
• Creates an air-gap, beneficial for the sound insulation and the vibration control.

We are India-based Manufacturer, Supplier and Exporter offering Isolation Control Unit (Vibro SC) in the global markets. To stand true to the aspirations of our valued customers, we employ state-of-the-art technology and superior-grade materials in the fabrication of these Isolation Control Units. One can avail themselves of Isolation Control Unit (Vibro SC) from us at nominal prices. We promise to deliver every order in given time.

Details :

• Isolated walls are a very critical aspect in order to prevent vibration transmission in a building application.
• Floating walls with vibration isolation products are often used in music studios, home cinemas and overall acoustically sensitive areas.
• In a floating wall construction, it is important that the walls of the space are isolated from the building's structural elements. Vibro SC acoustic wall braces are used when space is limited between the isolated wall and the main building structure.
• The Vibro SC acoustic sway brace is only 40mm wide so can be fitted within most cavities It contributes in fully isolating an acoustically sensitive space, by preventing vibration transmission and sound bridges.  If the wall requires lateral support, anti-vibration wall braces will be required.
• VIBRO vibration isolation products offer a complete range of solutions which can isolate most wall types, primarily drywall. A large range in wall weights can be accommodated and customized solution can also be carried out.

We are a prominent Manufacturer, Exporter and Supplier of Rubber Mounts (Vibro-Strip) from Tamil Nadu, India. Designed as per the predefined industry standards, our Rubber Mounts are quality assured having non-corrosive properties. They are designed specifically to sustain impulsive loads. Without burning holes in your pockets, we offer Rubber Mounts at the moderate prices. Whether it is a small order or bulk one, we have always delivered the placed orders well in time.

Details :

• The hemi-cylindrical bearing strip is a non-reinforced rubber bearing system with advanced wavy design
• Due to its ingenious profile, the cross-section is suitable for use as an elastic support for structural components

Dimensions : Thickness 10 mm, Width 108 mm. It is supplied in up to 3 m lengths

We are engaged in manufacturing, exporting and supplying high grade Seismic Restraint (SeismiCon) that are based on anti-vibration mounts. With the help of pioneering, our quality analysis team makes sure that Seismic Restraint is reliable and has long service life. We are distinguished from our competitors for our competitive prices and timely delivery of all orders.

Details :

• Limited displacements of machines during seismic stimulations.
• Restrain machines which are based on anti-vibration mounts during excitation of external forces.
• Machines based on anti-vibration mounts such as springs, elastic pads etc., during external stimulations (e.g. earthquake, wind, twister etc.) can develop critical displacements.
• These displacements may stop the operation or even cause serious damage to the machine.
• Seismic restraints could resist the imposed forces and limit the movement of equipment to all three directions.
• Besides, restraints prevent sound – bridge between the machine and its support base, due to their internal neoprene bushings. Thus the vibrations during the operation are not transmitted.

We are a well-known Manufacturer, Exporter and Supplier of Acoustic Enclosure that are designed for quick assembly and dismantling for meeting critical requirements of high noise attenuation from noise generating machine. Using latest technology, we make sure that Acoustic Enclosures gives high performance and have long service life. Competitive prices and prompt delivery of all orders are our priorities.

Details :

• Suitable for both indoor and outdoor applications.
• The outdoor application we will provide the suitable rain proof arrangement on the roof.

Technical specification of Acoustic Enclosure Construction :

• The Enclosure is in modular/welded in construction
• The Enclosure is fabricated out of and 16/18 gauge thick cold rolled cold annealed (CRCA) sheet or GI sheet.
• Base Frame is made of ISMC/CRCA of suitable section sheet metal.
• Durable industrial locking system is provided on doors.
• Doors and panels are fitted with high quality EDPN Gasket.
• Acoustic Insulation Sound proofing of the enclosure done with high density ROCK WOOL
• Rock wool is fire resistive covered with perforated sheet and Protective scrim cloth.
• And the further outside secured with cover sheet.
• We have developed acoustic enclosures for all types of industries including steel, power generation, manufacturing, mining, chemical and cement plants.
• Ventilation to avoiding heat buildup inside the enclosure we will be providing suitable ventilation exhaust Blower fan with air intake and exhaust silencers.
• This blower fan capacity will be calculated depends upon the motor or engine heat load and allowable temperature raise inside the enclosure.