Our Products
We are engaged in offering pouch filling machine to our clients. These are used in various industries for filling water, liquor, milk, oil, butter milk, spice powders and any free flowing liquid. Made out of quality material, these machines are known for high performance, low maintenance and easy operation.
We are specialized in manufacturing a wide assortment of automatic bottling machine which are easy to operate and available in various capacities and specifications. Our range filling machine with conveyors for for liquids & semi-liquids. These are suitable for mineral water, medical syrups, juice and chemical industry. Further, our range is designed with neck holding transfer systems and so no change parts or time is required for changeover from one size to another. These automatic bottling machines are easy to install and have a low waste disposal rate. Sturdily constructed using the best grade components, these machines are widely appreciated for their reliability and high performance. Further, we also quality test these automatic bottling machine on different parameters to match with the set industrial standards.
In Water treatment, chemicals like Chlorine, Alum, and Anti- Scalants are required to be added in precise amounts. This work is carried out by dosing pumps which are highly accurate in dosing small amounts of any liquid chemicals as per the flow rate and capacity of the plants. As these pumps are digital in make they require to be set only once, and are completely maintenance free. The capacities of these pumps vary from a mere 0.1 Ltrs. /Hr. upto 500 Ltrs. /Hr.
Ozone is a pungent gas naturally produced in the earth's upper atmosphere by the action of uv sunlight on oxygen molecules. Ozone can be created for water treatment purposes by sending air through a special chamber containing a high-voltage "spark, " which creates a blue plasma corona; it is also produced by sending air through a chamber of ultraviolet light. ozone is a powerful oxidizer similar to chlorine. Many of the same benefits we get from chlorinating water (disinfection, oxidation of metals, etc. ) is also realized by using ozone gas, except that with ozone, there is no chemical residual left in the water. Chlorine can combine with organic material in water to produce toxic compounds, such as "thms".
Because of its active characteristic, ozone cannot be stored. So it is generated on-site near its point of use. Ozone is generated by the exposure of air or pure oxygen to a high-energy source such as a high voltage electrical discharge (corona discharge), photochemical reaction (uv light), high or low electrical frequencies or high-energy radiation. The most widely used procedure is the corona discharge method because it produces the highest concentration of ozone for the amount of electrical energy applied and currently is considered to be the only practical method of generating ozone in large scale quantities.
In the corona discharge method a dry, oxygen-containing gas (air or pure oxygen) is passed between two electrically charged plates separated by a ceramic dielectric and a narrow discharge gap while a high voltage alternating current is applied. Under these conditions a portion of the oxygen in the feed gas is converted to ozone in the following manner:
o2+e 2[o]+heat
2[o]+202= 203
Because ozone is only slightly soluble in water, at the partial pressure at which it is generated and applied, contacting ozone with water involves bringing bubbles of ozone-containing air or oxygen into intimate contact with the water.
The ozonation process may be divided into four main parts: gas preparation, electrical power supply, ozone generation and contacting. Associated with these basic components are additional subunits such as controls, instrumentation, cooling water and/or cooling air supply, ozonized gas and water are generally brought into close proximity in a contractor, usually a venture injector type. Mass transfer of ozone from the gaseous bubbles occurs across the gas/liquid interface into the water.
Industrial water treatment plant is used to optimize most water-based industrial processes, such as heating, cooling, processing, cleaning, and rinsing, so that operating costs and risks are reduced. Poor hardness removal water treatment lets water interact with the surfaces of pipes and vessels which contain it. Steam boilers can scale up or corrode and these deposits will mean more fuel is needed to heat the same amount of water. Cooling towers can also scale up and corrode, but left untreated, the warm, dirty water they contain will encourage bacteria to grow, and Legionnaires disease can be the fatal consequence. Also, iron removal water treatment system is used to improve the quality of water contacting the manufactured product e.g. semiconductors, and/or can be part of the product e.g. beverages, pharmaceuticals, etc. In these instances, poor water treatment can cause defective products. Domestic water can become unsafe to drink if proper hygiene measures are neglected. We also provide water solutions, industrial water solutions, water treatment plant and industrial water treatment plant.
Water treatment describes those processes used to make water more acceptable for a desired end-use. These can include use as drinking water, industrial processes, medical, and many other uses. The goal of all water treatment process is to remove existing contaminants in the water or reduce the concentration of such contaminants so that the water becomes fit for its desired end-use. One such use is returning water that has been used back into the natural environment without adverse ecological impact.
The processes involved in treating water for drinking purpose may be solids separation using physical such as settling and filtration, chemical such as disinfection and coagulation. in addition, many biological processes are also employed in the treatment of waste water and these processes may include, for example, aerated lagoons, activated sludge or slow sand filters.
A quality conscious company offers the most comprehensive, cost-effective, and reliable drinking water treatment. At, pioneer water solutions, while offering municipal drinking water treatment, we always care for quality and customers satisfaction thats the reason, our whole ozone drinking water treatment and uv drinking water treatment processes are monitored by a team of water treatment experts. While purifying contaminated water, our professionals use advanced purifying equipments to remove successfully all kinds of toxic bacteria, chemicals, and heavy metals routinely and make safe drinking water.
Reverse osmosis (ro) is a modern process technology to purify water for a wide range of applications including semiconductors, fisheries, food processing, biotechnology, pharmaceuticals, power generation, seawater desalting, and municipal drinking water. Our product range also includes drinking water treatment plant. Ro drinking water treatment is the cost effective water purification system and serves as an immediate source of pure water. The process of reverse osmosis (ro) represents the finest level of liquid filtration available today. And though the term sounds mysterious, reverse osmosis isn't really that complicated.
Ordinary water filters use a screen to separate particles from water streams. The holes that these filters have are fairly large. This allows just about everything that is dissolved in the water to pass through as well. An ro drinking water treatment system employs a semi-permeable membrane. The membrane is a thin, multi-layered sheet with pores so small that water molecules can pass through, but it acts as a barrier to dissolved solids like salts and other chemicals. Thus even bacteria and viruses are trapped and not allowed to pass through.
Reverse osmosis system removes salts, micro-organisms, and high molecular weight organics. The capacity of RO drinking water treatment system depends on three major factors.
We offer to our clients a wide range of reverse osmosis system (RO) that finds applications in various industries. These are used for eliminating suspended particles & dissolved solids, metals, ions, inorganic, organic & various bacterial contaminants present in the water. Widely known for effective performance and high efficiency, our range is offered at market leading rates to our clients. Reverse osmosis is a membrane separation process in which feed water flows along the membrane surface under pressure. Purified water permeates the membrane and is collected, while the concentrated water, containing dissolved and undissolved material that does not flow through the membrane, is discharged to the drain.
Reverse osmosis is the only answer to a cost effective water purification system. The process of reverse osmosis (RO) represents the finest level of liquid filtration available today. As these systems are fully automatic and do not require chemicals they are an immediate source of pure water. The biggest advantage being able to handle waters with TDS of 100ppm to 60, 000ppm, compared with distillation. reverse osmosis is far less expensive than ion exchange process and can still remove 99% of dissolved solids.
Ultra Safe Ultraviolet Water Purifiers are manufactured from stainless steel 304/316/316L. The Radiation chamber is mirror polished from the inside and outside thus reflecting max. Amount of radiation. Both the ends are flanged for easy operation, maintenance and servicing. Specially designed reflectors give additional U.V. reflection to get maximum efficiency. Units are designed to get maximum retention time and turbulence of water for better results. The U.V. Lamps are housed in quartz sleeve and assembled in Stainless Steel Shells. Each quartz jacket is provided with a specially designed wiper assembly for removing any particles that get settled on the Quartz tube.
The wiper assembly is specially designed for easy operation without stopping the operation of the unit. The system is completely sealed to avoid any harmful effects from U.V. radiation. All witted rubber parts are made of Food Grade Silicon Rubber to avoid bad odor & detraction due to U.V. radiation. The Power Panel of the system is specially designed to withstand voltage fluctuation up to 5% + . All the U.V. Cables are protected with spiral shield. The U.V. lamps are provided with indicator lamps to show the burning of U.V. lamps. An alarm system can be provided to give signal in case of any lamp failure. (Optional). They are available in capacities ranging from 100 ltrs./hr. to 1, 00, 000 ltrs./hr.
We provide our clients with a range of pet blow molding machine and bottle blowing machines, which are used to manufacture the bottles of any possible geometrical figures. Our range of blow molding machine is used for PET bottles ranging from 30 ml to 2000 ml. These are fabricated using high grade material and cater to the requirements of various industries. Best known for effective performance and high efficiency, our range is offered at market leading rates to our clients.
meet specification of pharma industry and to meet latest gmp requirement all our housings meant for sanitary, applications are provided with mirror finish on both , sides and are also electro polished to 240 grit finish. They are suitable to adapt filter element of standard length like 10, 20, 30, 40 , having end connection like doe, code 7, to suit all international designs . These filter cartridge are available in nominal rated like wound / spun bonded or absolute rated like pleated pp cartridges unto 0. 2 micron. The cartridge dia 2. 5, 4 (jumbo) material pp/ ss.
They are used for normal filteration and do not have a long life.
They are used for filtering water with high turbidity as their surface area, and dirt holding capacity is more.
These are high efficiency cartridges, which can even stop bacteria and other pathogens, which are present in the water. They have a long life of more than six months. The biggest advantage is that they are washable for any number of times.
Bag filter system is designed for optimum filtration performance. The range provides filtration solution for a broad variety of fluid applications in the process industry. They are particularly useful for filtering large volumes of high viscosity liquids. Bag filter is constructed of filter housing, filter bags, internal cage to support bags, positive sealing arrangement, & choice of end connections. The internal supports ensures bags will not burst as high differential pressures build up during operation. Operation Unfiltered fluid enters the housing and is distributed evenly around the filter bags. Filtration takes place from inside to outside. Solids are collected on the inside of filter bag for easy removal. The filtered fluid then exits through the outlet pipe.
A TDS Meter indicates the Total Dissolved Solids (TDS) of a solution, i.e. the concentration of dissolved solids in it. Since dissolved ionized solids such as salts and minerals increase the conductivity of a solution, a TDS meter measures the conductivity of the solution and estimates the TDS from that. Dissolved organic solids such as sugar and microscopic solid particles such as colloids, do not significantly affect the conductivity of a solution so a TDS meter does not include them in its reading.
A TDS meter typically displays the TDS in parts per million (ppm). For example, a TDS reading of 1 ppm would indicate there is 1 milligram of dissolved solids in each liter of water.
A rotameter is a device that measures the flow rate of liquid or gas in a closed tube. It belongs to a class of meters called variable area meters, which measure flow rate by allowing the cross-sectional area the fluid travels through to vary, causing some measurable effect. The rotameter is popular because it has a linear scale, a relatively long measurement range, and low pressure drop. It is simple to install and maintain.
Ordinary water filters use a screen to separate particles from water streams. The holes that these Filters have are fairly large. This allows just about everything that is dissolved in the water to pass through as well. An RO drinking water treatment system employs a semi-permeable membrane. The membrane is a thin, multi-layered sheet with pores so small that water molecules can pass through, but it acts as a barrier to dissolved solids like salts and other chemicals. Thus even bacteria and viruses are trapped and not allowed to pass through.
Also called a rotary-type backwash valve This valve replaces as many as 6 regular gate valves. Water from the pump can be diverted for various functions by merely turning the valve handle. The water may be sent to waste, used for back washing, bypassing the filter for maximum circulation, for normal filtration, filtering to waste (rinse), or the valve may be closed to not pass water. The pump must be off before changing a valve setting.
Global environmental concerns have directed attention to the discharge of waste water, which may originate from residential settlements, commercial institutions as well as industrial establishments. Panasia Ecotech understands that it applies cutting-edge technology and proven expertise to keep its clients in the pink health by providing superior water cleaning systems.
Panasia Ecotech possesses expertise in activated sludge process, re-activated sludge process, anaerobic systems, aerobic systems, recycle systems, waste water treatment and sewage water treatment. This can be used as process water, thus it creates a Zero pollution atmosphere and is eco-friendly. The quality obtained also conforms to the standards of the Pollution Control Board. Our technological sewage treatment plants are adequate to meet requirements of diversified sectors like residential complexes, hospitals, schools and institutions, hotels and resorts.
Twin Lobe Rotary Blower is a positive displacement machine which discharges a constant volume of air. The machine is used to transfer air and other gases from a low pressure to a high pressure. In pressure application the blower usually takes air from the atmosphere and transfers it to a system at a higher pressure. In Vacuum application the blower pumps air from a system and discharges to the atmosphere
Pressure gauges measure the pressure of a liquid or gas. Pressure gauges are an essential part of many major industries. One industry in particular is a refinery. These gauges allow workers to monitor how much pressure is flowing through pipelines. There are several ways pressure gauges are used.
The SNAP-CAP PLUS 5 represents a substantial advancement in the art of diffuser design. The major improvement in the snap-n check diaphragm cap which is now manufactured from a new, specially compounded. Space-age EPDM based thermoplastic rubber that provides extended life and improved performance.
Our tubes are designed for maximal strength at minimum positive buoyancy. Although tubes are usually not as efficient as discs, tube diffusers are often the most economical choice of all diffusers, particularly the 63mm diameter x 1m because of their relatively large size and high air capacity compared to disc diffusers. They require fewer header pipes, less support stands and less installation time than disc diffusers. The tube membranes are extruded from low extractable oil content EPDM polyurethane, Silicon or Nitrate.
Our organization is involved in manufacturing and supplying a wide range of pet bottle filling machine and automatic pet bottle filling machine as per the specific requirements of our valued clients. These automatic bottling machines are essential for small to mid sized bottlers and are widely used in various industries for packaging purpose. Our range of Automatic Pet Bottle Filling Machine is a completely automatic machine that requires no manual touch. These have a stainless steel 304 body with contact parts in stainless steel 316 and complete unit with PLC, digital timers & bottle counter.
We offer to our clients automatic bubble top filling machine that is used in the package drinking water plants. These are manufactured using high grade material and are available in various capacities with an adjustable filling capacity. Moreover, we can also customize our range as per the requirements of our clients.
Bangalore, Karnataka, India 