Pangulf Technologies Pvt. Ltd.

Eastern Express Highway, Thane, Maharashtra

Best Performance bandsaw blade with wear resistant M42 HSS suitable for vibration-reduced cutting of thin or medium materials.General purpose band saw blades for all type of sawing
Advantages:

• High cutting accuracy
• High wearability by alloyed high cutting steel with 8% cobalt
• High working life by oscillating sawing cuttings

Range of application:

• For all workshop cuts
• For profiles and bundle cuts
• For small and often changing workpiece dimensions
• For often changing solid material to approx. 150mm width of cutting length

Best Performance bandsaw blade with wear resistant M42 HSS positive rake angle which ensures high performance and long service life with high cutting accuracy of thin or medium materials
Advantages:

• Increased cutting accuracy and wearability by alloyed high cutting steel with 8% cobalt and 10% molybdenum.
• Increased edge life comparable for Bi-metal saw blade

Range of application:

• For steel up to 45 HRC
• For all workpiece dimensions
• For serial cuts im automatic operation
• For bundle cuts of large workpiece dimensions and solid material
• For non ferrous metals and fine steel profiles

Extremely innovative teeth design, suitable to cut tubes and structural in singular or bundles. The new PB design is very resistant to teeth strippage.
Advantages:

• Optimized aggressive tooth profile
• More resistant to tooth strippage
• Little tooth and blade wear
• Wide cutting channel for more free space avoiding nipping of the saw blade in the material
• For higher cutting temperatures and so for a higher wearability
• High tool life at cutting of hollow sections and bad supported I-beams

Range of application:

• For bundle cuts with big workpiece dimensions
• For both cutting of big profiles and full material
• For all kinds of profiles and bundle cuts
• For poorly supported I-beams
• For steels with a low or middle grindability and stainless steel profiles

High performance wear resistant M42 HSS teeth with high positive rake angle makes it suitable for cutting difficult to cut materials in medium to large dimensions
Advantages:

• Specially developed positive tooth profile

• New tooth profile for better chip disposal at serial cuts and production cuts of carbon steel and alloys

Range of application:

• Serial cuts
• Suitable for all machining on medium to high toughness metal cutting materials
• For solid material and thick walled tubes like tool steel and stainless steel
• For alloyed steels, rust-free steels and carbon steel

MEBA CARBIDE - HP

New Design carbride tripped unset groud teeth band saw blade, suitable for very difficult to cut/hard material with very accurate and fast cuts in medium to large dimensions. Available from 13mm to 80mm width in different TPI'S. Also suitable in NF foundries for large, sand casted material cross sections.

MEBA CARBIDE - ST

Carbide tipped bandsaw blade, excellently suited for cutting of abrasive materials, with suitabilty to use for construction industry and building trade. Available in 13mm to 27mm width in different TPI'S.

MEBA CARBIDE - FD

Carbide tipped foundary specialist bandsaw blade for sawing of hard materials and metals that are hard to handle, as well as cutting of sanded castings. Available in 27mm to 67mm width in different TPI'S.

MEBA CARBIDE - CH

High performance bandsaw blades for cutting pf abrasive materials and bonded materials that can't be cut easily by normal toothed bandsaw blades, suitable for cutting vehicle tyres, graphite, brakes linings, glass-fibre reinforced plastics, cables and ceramic tiles.The cutting edge is coated with carbide particles on spring hard end, fatigue-resistance blade body which can be continuous or intermittent for chip removal. Available in 10mm to 38mm width in continuous and gulleted profiles.

MEBA CARBIDE - GC Carbide tipped foundary specialist bandsaw blade for sawing of hard materials and metals that are hard to handle, as well as cutting of sanded castings. Available in 27mm to 67mm width in different TPI'S