Write a Review
Our Products
Our product range contains a wide range of 10 Bit MINI Absolute Analogue Encoder, VE-360 and 10 Bit Absolute Analogue Servo Encoder, NCP-711-SSI
Pankaj, keeping in line with the policy of pioneering to manufacture potentiometer with 100% own technology, introduces Short Stroke Potentiometer. Type LCP-10 or LCP-20 Housed in 20mm square, strong glass reinforced engineering plastic, flange type mounting with M4 screws. Output connections are through Gold plated PCB, 2.54mm ralimate connector.
| 20 mm square moulded housing | Gold Plated PCB Terminals |
| 5 mm Diameter spring return plunger | Gold plated wiper contact |
| Flange mounting | Long life |
| 10 mm or 20mm Electrical travel | Infinite resolution |
| Gold plated PCB |
| Resistance Values | 1K, 5K & 10K Ω |
| Resistance Tolerance | +25% |
| Linearity | +1% |
| Stroke Length | Mechanical: 12mm/22mm, Electrical : 10/20mm |
| Stroke Life | 1 Million cycles |
| Operating Temperature | 0°C to 70°C |
| Output Curve | Linear |
| H. V. Test | 500VAC for 1 minute |
| Housing | 20mm Square |
| Housing Length | 43mm |
| Plunger Diameter | 5mm |
| Flange Mounting | Two holes 5mm dia. @ 35mm |
| Pilot Diameter | 8mm x 3mm Thick |
The new product in PANKAJ Basket, Model VE-360 to provide Solid state analogue output on panelmounting manually actuation using contactless Halls effect technology. Burg pin connectors makes termination connection easy.
The product is also available, pre programmed with effective rotational angle of 45, 90, 180 and 360 in CW and CCW.
| Angle of Rotation | 0~360° Clockwise rotation (Endless), can be factory programmed for termination connection easy. 180°,90°, 45° and Counter Clockwise rotation |
| Auxiliary Supply (Vss) | 5VDC±10%, 25mA max |
| Output | 0-Vss, Ratio metric with supply (Load ≥ 2KΩ) |
| Total Independent linearity | ±0.7° (with respect to best line fit and over full temperature range) |
| Resolution | 10 bit (0.35°) over 360° for 360° range, 11 bit (0.176°) over 180° for 180° range, 12 bit (0.088°) over 90° for 90° range, 12 bit (0.088°) over 45° for 45° range |
| External Magnetic Field Effect | Negligible effect due to Differential Measuring technique & sensor conditioning circuitry. (It is desirable to mount encoder away from strong magnetic field, at least 100mm |
| Maximum Angular Shaft Speed | 100RPM. Number of samples per revolution decreases as the speed of rotation increases. Accuracy of output is not affected by Speed |
| Operating Temperature Range | 0°~70°C |
| Temperature Compensation | No external compensation required |
| Insulation Resistance | 2000MΩ min. @ 500VDC |
| H.V. Test | No damage for 1 min at 250VAC |
| Protection with 100mA fast blow fuse in series with supply | a. Reverse polarity protection, b. Maximum auxiliary supply up to 35VDC, c. voltage output short circuit protected to ground rail |
| Rotational life | 1 million |
| Protection Class | IP-40 |
| Fixing Method | 3/8” x 32 TPI ME bush |
| Size | Refer Drawing |
| Casing Material | Reinforced Polyamide |
| Shaft Material | Nickel Plated Brass |
| Weight | 22gm |
Vijaykumar N Kinariwala (Pankaj Potentiometers Pvt. Ltd.)
201-b, Udyog Mandir 1, 7-c, Pitamber Lane, Mahim, Mumbai, Maharashtra - 400016, India
Share us via
