Jaipur, Rajasthan, India
GST : 08AAQPA4228A2Z4
Verified
Add Review
Our Products
Description
Paper Delmhorst Moisture Meter is specially useful for testing moisture of Paperboard, Corrugated Board,
Moisture Meter is designed with electrical resistance by utilizing the relationship between moisture content and electrical resistance. The contact pins mounted on the top of the meter are used for making direct contact with the material. Moisture Meter is especially useful for testing paperboard, corrugated board, and paper tubes.
Description:
Automatic Tearing Resistance Tester - it has pneumatic clamping of test pieces.Automatic calcutations are done through microprocessor and presentation of measured value to ensure accurate and stable test results.
It can be attached with computer & printer.
As per TAPPIT:
414, SCAN P-11, EN 21974, DN 53128.
Description:
Guillotine Type A4 Sample Cutter is used for accurat and rapid prepration of test pieces and sample in laboratory.
Precision Test Strip Cutter-it is provided with automatic clamping device which by means of clamping beam holds the sheet material firmly prior to the cutting action.provision is kept for cutting the strip sample for tensile test cutting width 15mm ×300mm using fixed size spacer & holding plate.
As per TAPPIT -494, SCAN- 38
Description:
Fully Automatic Dead Weight Thickness Micrometer is used for rapid and accurate measurement of thickness of paper, board and plastics. The thickness of sheet is measured as the distance between two circular plane surfaces under a steady pressure 1Kg/cm (98.0 Kpa). It measures thickness of paper, board & plastic films rapidly and accurately. It is a Compact model with digital display. Measuring spindle with constant lowering speed (1 mm/sec) and Single Button Operation (Motorized). Hardened and lapped measuring face. Provided with Mitutoyo (Japan) make add-on Optical. Transducer which scan a line screen. Compact Models with digital display.
Measuring spindle with constant lowering speed (1 mm/sec) and Single Button Operation (Motorized).
Description:
Gann Type Paper Moisture Meter is an electrical resistance type digital moisture meter. It calculates on the basis of mass of water/ mass of solids. Since the electrical conductivity of paper is considerably affected not only by its moisture content, but also by the paper temperature and various substances contained in the paper, it is necessary to take these influences into consideration in the design of the moisture meters to ensure accurate readings.
Board and Corrugated. The hands close naturally around the ergonomic form of the housing so that the pins on the end of instrument can be pressed into the material to be measured. The thin pins Paper Board and Corrugated Board
Effect of moisture on properties :
Higher GSM and lower Bursting Strength due to higher moisture. Tensile Strength decreases with increasing % RH. The strength of bonds between fibers is reduced. Tensile Stretch increases with increasing % RH. Elmendorf Tear Strength increases with increasing % RH. This is because fibers are more likely to pull out of the structure due to reduced bonding strength. More work needs to be done to complete the tear. Tensile Stiffness decreases with increasing % RH.
Salient Features:
Description:
This cutter is used for preparing the sample for edge crush test. The cutter is made up of stainless steel and it is very sharp.
Description:
We are Making, Exporting and Supplying wide range of Punch and Die Cutter from Jaipur, Rajasthan, India. The Punch and Die Cutter for Gsm Test are intended for accurate and rapid preparation of test pieces for use for gsm testing.
As per TAPPIT:
489, Scan-38.
Strip Punch:
For preparation of test pieces towards use in Internal Ply Bond test size 1"x12"
Description:
Analog Thickness Gauge is a precision instrument for measuring the Thickness of paper, Plastic films, Laminates, Foil or Board. A dial type micrometer is mounted on the base with a dead weight on top so develop a uniform, reproducible constant pressure.The total system is closed in an air tight, transparent enclosure protecting dirt & dust.
Description:
Our enterprise has gained recognition in the industry for offering Consistency Transmitter. Our offered transmitter is provided with quality packing in order to ensure its safe transit. This transmitter is manufactured from the high quality of material & modern techniques in compliance with the set norms of industry. The offered transmitter is provided in numerous specifications to choose from in a stipulated time frame.
Features:
Description:
Keeping in mind, diverse choices of our clients, we are engaged in offering Gsm Control Valve. Offered control valve is developed employing quality-proven material and high-end technology in conformation with current market standards. Our control valve is used in fan pump to regulate the grammage. Customers can avail the offered GSM control valve from us in various specifications in a given time frame.
Features:
Description:
Paper Auto Guide is used for the automatic guidance of paper on felt and fwire paper mill. Stroke value is 40-50 mm in one side. It is more useful for high speed machine.
Description:
Pneumatic Bursting Strength Tester with printer determines the Bursting Strength for the Quality Control and Research & Development of paper, board and corrugated board. A test piece is clamped between two concentric plates each having circular opening in the center. Pressure is applied to the under side of a test piece by a rubber diaphragm, which is expanded by pneumatic pressure.
It has heavy cast-iron block & aluminum body, strain gauge pressure transducer, microprocessor system for sample, built-in pneumatic system for the diaphragm, quick connector for calibration, built-in electronics microprocessor and printer and exclusive.
You can also store 250 readings in your memory card.
Process
You can check Bursting Factor of the Paper/Board Feed GSM of the test paper and you will get bursting strength and burst factor of the test paper/board in Decimal by Microprocessor System and with print
Technical - Specification:
Description:
Digital Humidity Meter indicates Ambient Humidity to an accuracy of about ± 2% ranging from zero to hundred percent. An imported versatile Phillips H1 sensor is used together with digital circuitry to measure, calibrate and store the data before displaying it on to the 3½ digit LEDS. Ambient temperature is also measured by LM-5 and displayed simultaneously on 3½ digit LEDS.
Features:
Description:
Muffle Furnace:
Muffle Furnace is used for incineration of solids. Temperature range up to 1000°C Working temperature 930° C Temperature controlled by energy regulator complete with Pyrometer and Thermocouple. Digital temp controller can be mounted on top side also.
Option:
Digital temperature indicator-cum controller.
Features:
Other Details:
Description:
A laboratory corrugating machine with digital temp. Controller for producing a sample to evaluate flat crush resistance of corrugating medium. 'A' fluting rolls are heated up to 176° C and maintained with a constant digital temperature controller. Standard model available with 'A' flute.
Sample size 0.5 inch x 6 inch
Description:
Lab Air Knife Coater consists of a welded square shaped frame which contains a transformer. Our offered knife coater is constructed expertly at our manufacturing unit under the guidance of our experts utilizing the finest quality material and advanced technology. Customers can avail this knife coater as per their needs at nominal prices.
It is used for coating the sample sheet materials in 10" x 12" size. The air-knife design of the coater guarantees uniform coating of the coating medium on to the test specimen. It is suitable for coating of latex, ink, lacquer and plastic dispersions etc. Air pressure adjusted by a control knob. As per TAPPI, SCAN, ISO.
Features:
Description:
Paper Ash Incinerator is used for determining the ash content in Paper, Cardboard and other Cellulosic material by burning an exactly weighed quantity.
Along with digital Temperature Indicator cum Controller (Range 0-1200ºC).
As per TAPPIT 413.
Options:
Description
Dennison Wax Pick is used for the evaluation ofsurface strength on Paper & Paperboard.Each Wax Pick isof hard resin non – oily type. Each box contains 8sticks of same number. It is simple, easy to use andinexpensive.
TECHNICAL METHOD FOR USE:
OPTION:
2A/3A/4A/5A/6A/7A/8A/9A/10A/11A/12 A/13A/ 14A/16A/18A/20A/23A
Description
This Instrument is made for Quick Determination of Pulp Stock Consistency. The instrument is manufactured in accordance with the second report of the Pulp Evaluation Committee to the Technical Section of British Paper & Board Industry Federation.
Technical Specification :
Description
Pap-Tech Fibre Classifier is designed to classify the distribution of length of pulp fibre with the help of sieves of different mesh size while feeding water. Change in length due to beating can also be measured. The fibre in a pulp suspension is divided into fraction with different mean fibre lengths.
Additional Information:
Description
Hand Sheet Former Used for the production of laboratory sheets for physical tests. The design of the drainage system provides a uniform flow across to the entire wire by permitting exceptionally uniform sheets. It is used for production of circular sheets in lab. Standard stirrer, couch roller, Drying plate 7 drying rings
Hand Sheet Former (SCA Type) is intended for production of laboratory sheets for physical tests. The design of the drainage system provides a uniform flow across the entire wire, thus permitting exceptionally uniform sheets. The Sheet Former is easy to install in a laboratory.
Features:
Description
Micro Fibre Projector It is used for studying and comparing fibre materials i.e. the effects of beating, surface structure and formation. It is supplied with built-in Fresnel lens behind the screens to give a bright and clear picture, lighting and the transformer as a variable output voltage outstanding stability and smooth control. As per APPITA, SCAN & TAPPI.
Description
This instrument is used for determining the Shieve Content in ground wood pulp. It is designed in accordance with second report of the Pulp Evaluation committee to the technical section of Paper Maker Association. A motor driven eccentric diaphragm actuation. Sunction is provided for fractional on the screen filled of the water. As per TAPPIT-275
Description
Features:
Description
Paper Mill Laboratory Sheet Press is use for pressing and watering the sheet quickly made on sheet making machine.
Standards:
As per TAPPIT-205, SCAN C26/M5, ISO 5269/1.
Hydraulic Type:
Description
It is used for pressing and watering and sheet quickly made on sheet making machine.
Standards:
As per TAPPIT 205, SCAN C26/M5, ISO 5269/1.
Pneumatic Type:
Sheet Press Control panel with 12 & 6 minutes pressing with adjustable timing.
Description
The Instrument is designed for standardized disintegration of pulp to a homogeneous suspension. Pivoted drive unit with stainless steel propeller and shaft. The propeller is driven by electric motor via stepped timing belt, which ensures a direct drive without slippage. Electronic Revolution counters with digital display.
Option:
Description
Rapid Dryer is intended for shortening the drying time of wet pulp or paper samples before determining the dry weight or moisture content.
It is provided with Flat heating Elements.It is suitable for Sheet Size: Max width 250mm, Max length 300mm. Temperature adjustment is done over a wide range up to maximum of 180 ° ± 10 ° c.
Description
Our Research digester is a complete pulping unit to produce pulps by cooking wood chip similer to a Research Digester. it is easy to operate and it has precise control of pulping variables to ensure accurate results. A sampling line with cooling attachments allows simples to be with drawn safely during the cooking process and a control valve determines the circulation rate of cooking chemicals.
Description
Offered sheet former is developed employing quality-proven material and high-end technology in conformation with current market standards. Our sheet former is high on demand in various industries due to its accuracy & superior quality. Customers can avail the offered sheet former from us in various specifications in a given time frame. It is used for production of laboratory pulp sheets rapidly for physical tests. It reduces the time factor comparitively, increases the output, reduces the operator's influence and improves the reproducibility. In this instrument couching is effected by means of pneumatic fixture through compressed air and stirring in the apparatus.Semi-Automatic Sheet Former is used for production of pulp sheet rapidly for physical strength tests. It increases the output, reduces the time factor comparatively, reduces the operator’s influence and improves the reproducibility. Stirring in the apparatus is an automatic function by use of, whilst In this instrument couching is effected by means of pneumatic fixture through compressed air and stirring in the apparatus.
Features:
Description
It is used for drying the lab pulp hand sheets of paper samples . The process helps to prevent wrinkling and shrinkage in the dried samples.It also permits convenient and rapid insertion of the sheets.
The Sheet Drying Cylinder is intended for Drying Laboratory Sheets. The Drying Cylinder Permits convenient and rapid insertion of these sheets since the cloth is mounted in practical reeling device.
Description:
Lab Hot Oven:
It is used for moisture determination of pulp, paper, and paperboard etc.
Double walled & heavily insulated.
Description:
Digital Gloss Meter is a modern instrument for electronically measuring and digitally presenting the Gloss of the paper and other material by angular reflectance.It gives precision measurements with less than ± 0.5 % FS deviation between the instruments.
Description
Lab Bar Coater The given coater is ideal for the application of the varnishes, adhesives, paints, liquid printing inks and many other surfaces coating which require sampling under accurately controlled conditions with variable coating speed. Our coater is well tested against various quality parameters so as to ensure its flawlessness. As well, we offer this coater on varied specifications in order to fulfill the demand of customers.
Lab Bar Coater Or K Control Coater is designed for the application of the paints, varnishes, adhesives, liquid printing inks and many other surfaces coating that require sampling under accurately controlled conditions. With variable coating speed between 2 and 15mm/min. including 7 Nos. coating rods.
Standard Coated Area = 27×15cm.
Features:
Description:
It is a manually operated circular (round) cutter with four knives along the perimeter. It is used for cutting circular sample of paper, board and similar materials. One test specimen at a time by turning wheel at 90° rotation (one quarter fitted with for sharp medical grade blade.
Salient Features :
Several layers of paper profile can be punched out in one operation simultaneously.
Save considerable amount of time in sample preparation.
Speedy and accurate cutting.
Cutting without any deformation and damage.
It has a high capacity.
Punch is exchangeable and can be easily resharpened.
Technical–Specification :
Punch made of special steel.
Punch Shape of circular knife in wave form.
It can be used for cutting a very white range of sheet material such as plastics, textiles, paper & paper board.
It determines basis weight profile in paper machine’s profile
The water and soil analysis kits which are used to accurately analyze the given water & soil samples. We have different variants of this product. These instruments areThe water and soil analysis kits which are used to accurately analyze the given water & soil samples. We have different variants of this product
Description:
The water and soil analysis kits which are used to accurately analyze the given water & soil samples. We have different variants of this product. These instruments areThe water and soil analysis kits which are used to accurately analyze the given water & soil samples. We have different variants of this product. These instruments are successfully serving the specific soil and water analysis requirements of the clients, and offer a cost effective solution to their needs. successfully serving the specific soil and water analysis requirements of the clients, and offer a cost effective solution to their needs.
Features :
Description:
It is used for testing the creasability of carton board. It ensures fault free folding which is suitable for board caliper 300-1000 micron (0.012-0.040 inch). 18 creasing channels between 1-4.06 mm (0.04-0.016 inch).
Variable crease depth.
Description:
It is used for testing the creasability of carton board. It ensures fault free folding which is suitable for board caliper 300-1000 micron (0.012-0.040 inch). 18 creasing channels between 1-4.06 mm (0.04-0.016 inch).
Variable crease depth.
Description:
Vibration Tester determines effect on filled packages during transit. Rectangular platform with side work accommodates the packages package size will be 700mm x 700mm. It is equipped with fixed speed DC motor drive power supply will be 230volt / 50 Hz DC. Vibration test is carried out to assess the performance of a filled package in terms of its strength of protection that it offers to its contents when subjected to vibration. This test method stimulates the transport hazards to produce an equivalent effect or damage during the test maximum weight of contains will be 50 kgs.
Description
We are the leading supplier of Paper INK Proofing Kit made available to our clients at competitive prices.
It is used for visual assessment of color under different lighting conditions.
Features:
Description :
Electronic Box Compression Tester is used to determine the compression strength of corrugated & non-corrugated boxes. The instrument is provided with Digital display of compressive load for determination of box compression strength. Instrumenty is supplied with memory for retaining peak value, automatic or normal zero setting, motorized version with AC drive and AC geared motor. It provides variable compressive speed , overload and over travel protection facilities.
This Instrument is used to determine the compression strength of corrugated box. Our Microprocessor based model is the most advance model in Packaging Industry
Features:
Our Box Compression Tester in a Microprocessor based.
Heavy Duty tester to determine the compression strength of the corrugated box. Load range selected to completely collapse as Peak load or may be with pre-determined load for a given period to evaluate stacking load.
Standards:
As per TAPPIT-804, DIN EN 22872.
Description:
This instrument measures puncture resistance of various packing materials and gives reliable indication to evaluate fabrication factors with material values in a composition fashion. The puncture resistance of paperboards is measured as the energy required to force a puncture head of specific design through a test piece of board under specified condition. The test specimen is clamped between two horizontal plates in each of which is a triangular hole. The Puncture Tester has a very heavy chest iron stand in order to avoid disturbing vibrations during a test.
Technical Specifications:
Description:
Vertical Tensile Strength Tester With Digital display of Tensile Strength & Stretch of Paper, Paperboard and similar materials complete with memory for retaining peak value, automatic or normal zero setting, overload and over travel protection facilities. With imported load cell & imported DC motor.
The Microprocessor Based Tensile Strength Tester is used for determining the tensile strength and stretch of sheet materials.
Technical - Specification :
Measuring Result : Individual results of Tensile Strength, Stretch, TEA, Tensile Stiffness, Breaking Length, Breaking time mean value & Standard Deviation.
Clamping Length : Selected.
Accuracy : 1% of reading down to 10% of the load cell capacity.
Resolutions : 0.025% of nominal load cell range and 0.1 mm in elongation measurement.
Computer Output : 1. RS 232 C & Printer port Model C 2 interface with pc having a specification a Pentium & specially developed software.
Application Standards:
SCAN P-38 ISO 1924/4, TAPPI 494, , APPITA/ AS 1301.448, BS 4415, CPPA D 34, DIN 533112, TEILL 1
