With a conveyor speed of more than 2 m/s, the Interroll Belt Curve is designed for high performance and trouble-free operation in different applications.

• Impregnation, is the processing step where dry fibres are combined with the liquid resin to make a preform. It is a unique operation, as it combines the fundamentals of fluid flow (matrix) and elasticity (fibres) to produce a truly viscoelastic material. Impregnation is a processing step that strongly affects the process efficiency. Process parameters like speed, temperature, roving yield, and material waste, along with quality aspects like fibre volume fraction and laminate void fraction, are all directly affected by the impregnation process.

A screw conveyor is a mechanism. It uses a rotating helical screw, called flighting, that is installed within a tube or trough, to move liquid or granular materials. In many bulk handling industries, they are used. Screw Conveyor is one of the Important Products among Mechanical Conveying Systems to convey bulk materials from one location to another. Every time the screw rotates, A tube- or U-shaped trough acts as the conveying surface around the auger, where powder bulk, granular, and even non-flowing material is pushed along the trough surface. In the screw conveyors material is fed through the inlet, passes through the conveyor via the turning auger, and is taken out via the discharge end. Screw conveyors can be designed in a horizontal, vertical, or inclined arrangement

We manufetureing all types of conveyor

Belt Conveyor

Roller Conveyor

Screw DOnveyor

Moduler Conveyor

All Conveyor systems arecustomized

• Fabricated form structural steel like, channel, angle or pipe Working on Principal of Flying Cut-Off Saw
• Electrodeposited Diamond Cut-Off Disc of Ø 300 / 400 mm
• Operating by 1.5 kW / 2.0 H.P Motor
• Section Clamping, Cutter Troll
• Movement & Cut-Off Blade
• Movement by Pneumatics
• Auto / Manual Operating mode using PLC
• Compressed air require: 2.0 – 3.0 CFM at 3.5 – 5.0 kg/cm² Pressure
• Electric requirement: 1.5 kW. Approximate overall dimension:

Fine screening is the second mechanical pre-treatment process allowing finer separation than coarse screens of the solid waste contained in the raw water. Filtration is carried out by a 6 mm to 0.25 mm opening using perforated sheet or wedge wire. Fine Screens are most of the time automated thanks to a motorization of the system of collection by a spiral, screw, drum, scraper or conveyor table. Manual solutions also exist requiring the action of an operator for a more affordable cost. The solid waste can then be discharged into a compaction system allowing a reduction in weight / volume and optimal dryness. The Fine Screen widely used in municipal wastewater treatment plant, pre-treatment device for domestic effluents, municipal rainwater & sewage pump station, water intake of water supply plant & cooling water of power plant. It can also be used for industrial wastewater treatment, such as textile, printing and dyeing, food, fisheries, paper making, brewing, slaughtering, and tanning industry. It is regarded as the ideal solid-liquid separation equipment in the water treatment field.

• The driving device is under the drive of cycloidal pin gear speed reducer or helical gear reducer, with low noise, neat structure & stable operation.
• Integrated framework, with good rigidity and convenient installation and maintenance.
• Two specifications for rake tooth, pitch t=150mm for coarse screens, pitch t=100mm for fine screens.
• Easy to operate. It can be direct or remote controlled. Mechanical shearing bolt & over-current protection are set to ensure safe running.
• While the width of equipment over 1500mm, parallel machines are adopted to ensure the integrated strength of equipment.

• Wide Size range 
• Operated by Lever or Gear Box.
• 90 deg opening/closing operation.
• Cast iron Body with powder coating.
• Epoxy Coated Ductile Iron disc.
• Wafer type Connection

• Fabricated form structural steel like, channel, angle or pipe and sheet metal
•  Glass roving stand holds rolls of fiberglass roving material.
• Supplied in one, two or three modules each having capacity of storing about 100 creels
• Each individual roving are guided through ceramic guide bushes
• Guide stand or rack maintains proper roving alignment and prevents roving entanglement.

• Fabricated form structural steel like, channel, angle or pipe
• Each stand holds 2 and more glass mat reel.
• Mat roller stand holds surface mat, this mat is added from the upward and downward side of glass roving material which comes from the resin bath. After the adding this met wet material is ready to enter in the heated die

With a conveyor speed of more than 2 m/s, the Interroll Belt Curve is designed for high performance and trouble-free operation in different applications.

• Impregnation, is the processing step where dry fibres are combined with the liquid resin to make a preform. It is a unique operation, as it combines the fundamentals of fluid flow (matrix) and elasticity (fibres) to produce a truly viscoelastic material. Impregnation is a processing step that strongly affects the process efficiency. Process parameters like speed, temperature, roving yield, and material waste, along with quality aspects like fibre volume fraction and laminate void fraction, are all directly affected by the impregnation process.

A screw conveyor is a mechanism. It uses a rotating helical screw, called flighting, that is installed within a tube or trough, to move liquid or granular materials. In many bulk handling industries, they are used. Screw Conveyor is one of the Important Products among Mechanical Conveying Systems to convey bulk materials from one location to another. Every time the screw rotates, A tube- or U-shaped trough acts as the conveying surface around the auger, where powder bulk, granular, and even non-flowing material is pushed along the trough surface. In the screw conveyors material is fed through the inlet, passes through the conveyor via the turning auger, and is taken out via the discharge end. Screw conveyors can be designed in a horizontal, vertical, or inclined arrangement

We manufetureing all types of conveyor

Belt Conveyor

Roller Conveyor

Screw DOnveyor

Moduler Conveyor

All Conveyor systems arecustomized

• Fabricated form structural steel like, channel, angle or pipe Working on Principal of Flying Cut-Off Saw
• Electrodeposited Diamond Cut-Off Disc of Ø 300 / 400 mm
• Operating by 1.5 kW / 2.0 H.P Motor
• Section Clamping, Cutter Troll
• Movement & Cut-Off Blade
• Movement by Pneumatics
• Auto / Manual Operating mode using PLC
• Compressed air require: 2.0 – 3.0 CFM at 3.5 – 5.0 kg/cm² Pressure
• Electric requirement: 1.5 kW. Approximate overall dimension:

Fine screening is the second mechanical pre-treatment process allowing finer separation than coarse screens of the solid waste contained in the raw water. Filtration is carried out by a 6 mm to 0.25 mm opening using perforated sheet or wedge wire. Fine Screens are most of the time automated thanks to a motorization of the system of collection by a spiral, screw, drum, scraper or conveyor table. Manual solutions also exist requiring the action of an operator for a more affordable cost. The solid waste can then be discharged into a compaction system allowing a reduction in weight / volume and optimal dryness. The Fine Screen widely used in municipal wastewater treatment plant, pre-treatment device for domestic effluents, municipal rainwater & sewage pump station, water intake of water supply plant & cooling water of power plant. It can also be used for industrial wastewater treatment, such as textile, printing and dyeing, food, fisheries, paper making, brewing, slaughtering, and tanning industry. It is regarded as the ideal solid-liquid separation equipment in the water treatment field.

• The driving device is under the drive of cycloidal pin gear speed reducer or helical gear reducer, with low noise, neat structure & stable operation.
• Integrated framework, with good rigidity and convenient installation and maintenance.
• Two specifications for rake tooth, pitch t=150mm for coarse screens, pitch t=100mm for fine screens.
• Easy to operate. It can be direct or remote controlled. Mechanical shearing bolt & over-current protection are set to ensure safe running.
• While the width of equipment over 1500mm, parallel machines are adopted to ensure the integrated strength of equipment.

• Wide Size range 
• Operated by Lever or Gear Box.
• 90 deg opening/closing operation.
• Cast iron Body with powder coating.
• Epoxy Coated Ductile Iron disc.
• Wafer type Connection

• Fabricated form structural steel like, channel, angle or pipe and sheet metal
•  Glass roving stand holds rolls of fiberglass roving material.
• Supplied in one, two or three modules each having capacity of storing about 100 creels
• Each individual roving are guided through ceramic guide bushes
• Guide stand or rack maintains proper roving alignment and prevents roving entanglement.

• Fabricated form structural steel like, channel, angle or pipe
• Each stand holds 2 and more glass mat reel.
• Mat roller stand holds surface mat, this mat is added from the upward and downward side of glass roving material which comes from the resin bath. After the adding this met wet material is ready to enter in the heated die