Other Products / Services #3766801

The project scope consists of Design, Engineering, Procurement & Construction (EPC) of Effluent Treatment Plant (ETP) on Turnkey basis.The produced water from group gathering station (GGS) are treated in the ETP having a capacity of 1300 m3day. The treated water is further reinjected into the Oil wells.

Evaporator differs from crystallizers in which evaporation is concerned with concentrating a solution rather than producing or building crystals. Evaporation is distinguished from drying giving always liquid residue. Paramount offer multiple effect evaporator as stand alone process unit and also for treatment of RO concentrates to achieve zero liquid discharge in Wastewater treatment plant.

The Aerator Impeller is provided with radial self cleaning blades, design to give optimum oxygen transfer in to liquid. The turbulance created by the impeller is sufficient to keep the sludge in suspension at the farthest point. The impeller is M.S. Construction with tubular shaft design for required torsional capacity. The wetted parts is suitable for withstanding The corrosive action of the liquid. The important aspect of the design of the impeller is a self-cleaning built in feature, which requires absolutely no maintenance of the impeller, since no range and other solids can gets caught within the Impeller vanes. The impeller is balanced statically.

Evaporator differs from crystallizers in which evaporation is concerned with concentrating a solution rather than producing or building crystals. Evaporation is distinguished from drying giving always liquid residue. Paramount offer multiple effect evaporator as stand alone process unit and also for treatment of RO concentrates to achieve zero liquid discharge in Wastewater treatment plant.

Limpet Coil Reactor construction is same as of the Jacketed Reaction vessel except instead of Jacket on the Shell of Reaction vessel Limpet Coil is welded on it. LimpetCoil Reaction Vessel consists of a Cylindrical vertical shell with a standard torospherical dish on both ends.

The incineration systems offered by Paramount are controlled air systems that thermally treat various types of hazardous solid and liquid wastes, sludge. The systems handle waste via a two-stage process. In the primary chamber, the system operates in a sub-stoichiometric mode.

Paramount design, manufactures & develops Degasser for removal of alkalinity from feed water to boilers, as a de alkalize unit, and for post RO for removal of Carbon Dioxide.Paramount can deliver these as a package unit tailor made for any Capacity. The largest delivered so far by Paramount has a Capacity of 750 m3hr. Degasser in water treatment is referred to Decarbonator where the primary importance is to remove Carbon Dioxide from the water. They play an important role when Alkalinity is present in water. Water containing alkalinity causes deposits and blocks the tubes in the boiler. It is placed after the Cation exchanger to mechanically remove the Carbon Dioxide. Water containing Bicarbonates when passed through the Cation Exchanger is converted to Carbonic Acid. The Carbonic Acid easily breaks into Water and Carbon Dioxide.

The types used can be broadly classified as Fixed Type Surface Aerators and Floating Surface Aerators. Fixed type aerators are fixed to RCC structures and connected with operational platforms. Floating type aerators are mounted on platoons that keep the aerators floating. The location of the aerator can be changed by a link arrangement.

Paramount design packed bed scrubbing units include counter current, vertical flow packed beds, and cross flow, horizontal scrubbers. These units are used to absorb gas phase contaminants from an exhaust gas stream. These are normally combined with chemical treatment equipment to not only collect the gas phase contaminants but also convert them into harmless chemical substances which can then be recovered or easily disposed off.

Agitators are machines used in industries fora) mixing liquids togetherb) promoting the reactionsc) maintaining homogeneity of liquid bulk andd) increasing heat transfer. agitator is provided with an impeller consisting of blades of enough area to give adequate agitation in the tank of given dimensions.

A double pipe heat exchanger, in its simplest form, is just one pipe inside another larger pipe. One fluid flows through the inside pipe and the other flows through the annulus between the two pipes. The wall of the inner pipe is the heat transfer surface. The pipes are usually doubled back multiple times as shown in the diagram at the left, in order to make the overall unit more compact.

The incineration systems offered by Paramount are controlled air systems that thermally treat various types of hazardous solid and liquid wastes, sludge. The systems handle waste via a two-stage process. In the primary chamber, the system operates in a sub-stoichiometric mode.

Agitators are machines used in industries for a) mixing liquids together b) promoting the reactions c) maintaining homogeneity of liquid bulk and d) increasing heat transfer. The agitator is provided with an impeller consisting of blades of enough area to give adequate agitation in the tank of given dimensions. Paramount Limited manufactures & supplies all three types of Agitators (Propeller type, Turbine type and Paddle type) for thorough mixing.

Moderate to high removal for scrubbers coarse particulate upto 3 microns & gaseous pollutants.Very high efficiency for fine particulate with partial removal of gaseous pollutants.

These gases can also result from caused by the decomposition of water into oxygen and hydrogen by thermal or chemical reactions. These gases must be vented from the condenser for the following reasons: The gases will increase the operating pressure of the condenser. Since the total pressure of the condenser will be the sum of partial pressures of the steam and the gases as more gas is leaked into the system, the condenser pressure will rise. This rise in pressure will decrease the turbine output and efficiency. The gases will blanket the outer surface of the tubes. This will severely decrease the heat transfer of the steam to the circulating water. Again, the pressure in the condenser will increase.The corrosiveness of the condensate in the condenser increases as the oxygen content increases. Oxygen causes corrosion, mostly in the steam generator. Thus, these gases must be removed in order to extend the life of cycle components.

Limpet Coil Reactor construction is same as of the Jacketed Reaction vessel except instead of Jacket on the Shell of Reaction vessel Limpet Coil is welded on it. LimpetCoil Reaction Vessel consists of a Cylindrical vertical shell with a standard torospherical dish on both ends. Limpet Coil is Half round Pipes welded on the outer surface of the shell and also in the bottom dish of the Limpet Coil Reaction Vessel. Limpet coil vessel's limpet coil is made of either Mild Steel Or Stainless Steel. It is either Double end double start for both heating and cooling through limpet coil or Normal Single coil for either heating or cooling. Limpet Coil Welding is performed by using high grade filler rods depending on MOC of the Limpet Coil to withstand design pressure. We offer high quality Limpet Coil Reaction Vessel in different capacities ranging from 50 liters to 15, 000 liters. Fabricated from superior grade of stainless steel, these vessels can be provided with different types of agitators such as anchor type, propeller type, paddle type, pitched blade turbine type of high-speed homogenizer. The unique design of our reaction vessels to allow the conditions to be controlled for fastest possible chemical reaction.