Our Products
An O-ring is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
The O-ring may be used in static applications or in dynamic applications where there is relative motion between the parts and the O-ring. Dynamic examples include rotating pump shafts and hydraulic cylinder pistons.
O-rings are one of the most common seals used in machine design because they are inexpensive, easy to make, and reliable and have simple mounting requirements. They can seal tens of megapascals (thousands of psi) of pressure.
A timing belt is a part of an internal combustion engine that synchronizes the rotation so that the engine's valves open and close at the proper times during each cylinder's intake and exhaust strokes. In an interference engine the timing belt or chain is also critical to preventing the piston from striking the valves. A timing belt is usually a toothed belt -- a drive belt with teeth on the inside surface. A timing chain is a roller chain.
A Hand Valve is a small valve that controls a limited-flow control feed by hands.
Specially designed one touch fittings are available for use in demanding pneumatic application environments. Fluor polymer fittings are available for use in clean room environments and swivel fittings can be used for rotary applications. Spark resistant fittings are appropriate for use in welding operations.
A pneumatic filter is a device which removes contaminants from a compressed air stream. This can be done using a number of different techniques, from using a "media" type that traps particulates, but allows air to pass through to a venturi, to a membrane that only allows air to pass through.
A large metal basket or frame on wheels, used for transporting heavy or large items, such as supermarket purchases or luggage at an airport or railway station.
Available in Single/Double ball bearing/with brakes All Sizes and Load Capacity. Types of Trolley Wheels:
Tubing is used for in environments involving high temperatures and/or corrosive fluids. Pneumatic tubing is also available in a number of other materials both with and without reinforcement for use in standard applications. Fittings incorporate a positive tube seal while the fitting is under pressure which allows polyurethane tubing to be used.
A Valve which immediately opens its outlet to exhaust, whenever the pressure of the air decreases at the inlet.
Description for this product is not available.Description for this product is not available.
High-quality quick-action coupling made of steel, stainless steel, brass or plastic for practically every application contingency.Very robust, rapid and secure coupling of practically all fluid media. Special solutions for your application needs can also be implemented upon request. Types of Quick Release Coupling:
A coupling is a device used to connect two shafts together at their ends for the purpose of transmitting power. Couplings do not normally allow disconnection of shafts during operation, however there are torque limiting couplings which can slip or disconnect when some torque limit is exceeded.
The brass fittings and stainless steel one touch fitting series are compact and lightweight. These two options offer even more configuration variations of one touch fitting designs and tube sizes.
A simple machine consisting of a wheel over which a pulled rope or chain runs to change the direction of the pull used for lifting a load. Combinations of two or more pulleys working together reduce the force needed to lift a load.
A compressed air dryer is used for removing water vapor from compressed air. Compressed air dryers are commonly found in a wide range of industrial and commercial facilities.
A mechanical seal is a device that helps join systems or mechanisms together by preventing leakage, containing pressure, or excluding contamination. The effectiveness of a seal is dependent on adhesion in the case of sealants and compression in the case of gaskets.
Hose pipe is graded by pressure, temperature, and fluid compatibility. Hoses are used when pipes or tubes cannot be used, usually to provide flexibility for machine operation or maintenance. The hose is built up with rubber and steel layers.
Types of Hoses:
A moisture separator is a device for separating water droplets from steam. The simplest type of steam separator is the steam dome on a steam locomotive.