Our Products
Specification :- |
Conduit Pipe Bending Machine for 14 to 24 Guage Aluminium Copper & Steel Pipes complete with formers of 5/8" 3/4" & 1" or any three formers up to 1"(We can arrange to supply formers in sizes of your requirements up to 1 1/4") |
Features :-
Split Second Clamping & Unclamping of job. |
Most varsatile application. |
Ideal & efficiency booster for mass production. |
Construction : |
SG Ductile Iron body (unbreakable) |
Collect holder made of selected steel hardened & ground. |
Finish : |
Black oxidized & hammer tone metallic blue |
Crystal" Magnetic sticks are very useful for removing steel particales from blind holes and useful for assembly & maintenance work for removing steel parts lying in oil tanks. "Crystal" magnetic sticks are compact unit embodying powerful 'Alnico' Magnets assembled in Stainless steel pots which are designed for lifting application. Lenght can be increased by joining extension.
|
||||||||||||||||||||||||||||||||||||||||
Bed is made from 25 Grade cast of 180 BHN hardness and seasoned after rought machining to avoid stresses.A all major casting are seasoned for reaining built-in accuracy.Test report as per indian Standard IS-1878 (part-1) 1971
Features :- |
Made from 20MnCr5 case hardened to 55-58 HRc. |
As per IS : 6702 - 1972 (Equivalent to DIN : 2185 - 1972 & ISO : 238 - 1974) |
Precision ground externally & internally. |
Concentricity within. 015mm. |
Features
6 MM Tapping Machines Clutch Cone | Specially heat lather cone also Provide specially treatment silicon liner cone. |
Head | made from close grained cast iron accurately bored, rimering and honed in perfect paralyze between the column and spindle. Easy clamping device fitted for locking it on the column. |
Spindle | Made from EN8 to withstand distortion it is lanced and mounted on roller bearings. |
Table | proportionately designed for rigidity and sufficient surface area is provided to hole down job. It can be vertically powered or can be vertically powered or raised by worm and rack raised by worm rack(19mm). The slotting are provided to hold the heavy job. |
Base | This is of design and provides sufficient area for heavy jobs. Slots are provided for convenient holding. |
pecification
Tapping Machine Capacity | 6 mm. |
Drilling Capacity | 3 mm. |
Spindle Travel/Table travel (6 mm.) | 60 mm. |
Distance Spindle to Column | 80 mm. |
Distance between chuck to base | 190 mm. |
Distance between chuck to work table | movable |
Size of base Plate-L x B | 370 x 250 mm. |
Size of Work Table-L x B | 150 x 150 mm. |
Diameter of Column | 47 mm. |
V-Belt (Inside) | - |
V-Belt for Motor (Outside) | A-36 |
No. of Spindle Speeds | 3 |
Forwards Speeds Range | 480/750/1400 |
Reverse Speeds Range | 480/750/1401 |
Motor Single phase or three phase | 0.25 H.P. |
1440 R.P.M. | |
Overall Height | 650 mm. |
Overall Width | 270 mm. |
Overall front to back | 540 mm. |
Weight approx | 50 Kg. |
Bench Polishers are suitable for carrying out buffing, polishing and dressing operations of parts of alluminium, plastics, stainless steel, Leather goods, jewellery, watch making industries, automobiles, gift articles, acrylic, electroplating industries etc. Heavy duty buffing machines from 2 H.P to 7.5 H.P. are manufactured in four Ball Bearing type and are provided with Copper Rotor (except 2 H.P.) so as to withstand temporary heavy overload conditions. Use of best quality stamping and diecast rotors. Dynamically Balanced rotor minimise vibrations and ensure smooth running. Construction of the machines are made sturdy and robust to offer vibration free performance. All Bench Polishers equipped with reversely threaded tapered spindles to take buffing mops. Use of high quality grease for lubrication. RECOMMENDED USE OF GREASE LITHON3 OR EQUIVALENT. All machines are subject to rigid quality control tests. Special custom made polishing machines as per customers specific requirement are also manufactured. Machines of different voltage and different frequency can be supplied against specific orders. All machines carry warranty (except Ball Bearings) against any manufacturing defect as per the warranty terms prevailing of the company. No warranty for wear and tear items.
H.P | K.W | Ph. | R.P.M |
Spindle Size |
A | B | C | D | E | F | H | I | J | K | L |
Approx Weight in Kg. |
|
VMT-1 | 0.25 | 0.18 | 1 | 2800 | 100 | 130 | 130 | 108 | 108 | 13 | 60 | 115 | 474 | 222 | 106 | 53 | 8 |
VMT-5 | 0.50 | 0.37 | 1 | 2800 | 165 | 233 | 233 | 204 | 204 | 24 | 96 | 170 | 675 | 350 | 162 | 81 | 23 |
VMT-7 | 0.75 | 0.55 | 1 | 2800 | 165 | 231 | 237 | 199 | 206 | 31 | 96 | 202 | 695 | 370 | 162 | 81 | 28 |
VMT-9 | 1.00 | 0.75 | 1 | 2800 | 165 | 231 | 237 | 199 | 206 | 31 | 96 | 202 | 695 | 370 | 162 | 81 | 29 |
VMT-4 | 0.50 | 0.37 | 3 | 2800 | 165 | 233 | 233 | 204 | 204 | 24 | 96 | 170 | 675 | 340 | 162 | 81 | 21 |
VMT-6 | 0.75 | 0.55 | 3 | 2800 | 165 | 231 | 237 | 199 | 206 | 31 | 96 | 202 | 695 | 370 | 162 | 81 | 25 |
VMT-8 | 1.00 | 0.75 | 3 | 2800 | 165 | 231 | 237 | 199 | 206 | 31 | 96 | 202 | 695 | 370 | 162 | 81 | 26 |
VMT-10 | 1.00 | 0.75 | 3 | 1400 | 165 | 231 | 237 | 199 | 206 | 31 | 96 | 202 | 695 | 370 | 162 | 81 | 27 |
VMT-12 | 2.00 | 1.50 | 3 | 2800 | 200 | 185 | 240 | 158 | 208 | 20 | - | 150 | 1110 | 630 | 275 | 160 | 57 |
VMT-14 | 3.00 | 2.25 | 3 | 2800 | 220 | 175 | 306 | 140 | 250 | 24 | - | 170 | 1250 | 810 | 335 | 190 | 105 |
VMT-16 | 5.00 | 3.75 | 3 | 2800 | 220 | 175 | 306 | 140 | 250 | 24 | - | 170 | 1250 | 810 | 335 | 190 | 108 |
VMT-56 | 7.5 | 5.5 | 3 | 2800 | 220 | 270 | 360 | 220 | 260 | 25 | - | 170 | 1370 | 930 | 345 | 195 | 155 |