Our Products
We are leaders in the market for providing best range of Car Engine Oil, Textile Lubricants, MULTIGRADE ENGINE OILS, STROKE ENGINE OILS and Shock Absorber Oil
These are high quality performancemultigradeengine oils, meeting API:SC/CC performance requirements, formulated from selected base oils and additives, to suit petrol and diesel engines.
PRODUCT FEATURES| Viscosity suitable for wide range temperatures and different engines. | |
| High performance features, keeps engine clean and minimizes maintenance cost. | |
| Good anticorrosive, antiwear, antirust and antioxidation properties. | |
| Reduced exhaust emission due to high detergency. | |
| Increased oil drain period due to good dispersant properties. | |
| Lower oil consumption and increased fuel efficiency. | |
| Quicker engine start and longer battery life. |
| Petrol engines, naturally aspirated and supercharged diesel engines, power generating sets etc, operating undermoderate dutyconditions. |
| Always change filter when changing engine oil. | |
| Short trips; stop-and-go traffic; excessive dust or dirt-such conditions are very hard for engine oils and may lead to frequent oil changes. |
| IS 13656-2002 (E-PL1/E-DL1), US MILITARY MIL-L-2104B, API:SC/CC specifications. |
PHB-20W40(BOUNCER): 210 Ltr., 50 Ltr., 20 Ltr., 10 Ltr., 7.5 Ltr., 5 Ltr., 1 Ltr., 1.2 Ltr., 500 ml, 1 Ltr. Pouch
PHB-20W50(BOUNCER): 210Ltr., 50 Ltr., 8 Ltr.
|
CHARACTERISTICS |
|||
|
Sr.No. |
Properties |
PHB- 20W40 (BOUNCER) |
PHB- 20W50 (BOUNCER) |
|
1. |
Appearance |
Clear, bright Red colour |
Clear, bright Red colour |
|
2. |
Kinematic Viscosity, cSt @ 100° C |
12.5-16 |
16.5-20 |
|
3. |
Viscosity Index, min. |
110 |
110 |
|
4. |
Pour Point, °C, max. |
-21 |
-21 |
|
5. |
Flash Point, COC, °C, min. |
210 |
220 |
|
6. |
TBN, mg. KOH/gm. |
5-6 |
5-6 |
These are superior products developed for two stroke petrol engines & are blended from highly refined base oils, additives & a diluent to provide easy mixing with fuel. These products minimize spark plug fouling & preignition, prevent rusting & provide protection against scuffing, seizure & wear.
PRODUCT FEATURES| Reduction in visible smoke. | ||
| Easy engine starting. | ||
| Quick pumpability in oil injection system even in low temperatures. | ||
| Lower oil consumption. | ||
| Reduction in exhaust port blockage. | ||
| Environment friendly. |
2 stroke air cooled gasoline engines used in scooters, motor cycles, mopeds, three wheelers etc. and small equipment such as sprayers, pumps, generators, agro-implements like pesticide blowers, tillers, chain saws etc.
PRECAUTIONSTo be used in oil-petrol ratio as per engine manufacturer's guidelines.
PERFORMANCE LEVEL2T POWER - EXCEEDS API:TC ; 2T SUPREME - JASO:FC specifications.
PACKING2T POWER -210Ltr., 20Ltr., 5Ltr., 1Ltr., 500ml2T SUPREME- 210Ltr., 20Ltr., 5Ltr., 1Ltr., 500ml & 40ml
|
CHARACTERISTICS |
|||
|
Sr.No |
Properties |
2T POWER |
2T SUPREME |
|
1. |
Appearance |
Clear, bright Green colour |
|
|
2. |
Kinematic Viscosity, cSt@ 40° C |
50-65 |
45-60 |
|
3. |
Viscosity Index, min. |
110 |
110 |
|
4. |
Flash Point, COC, °C, min. |
70 |
70 |
|
5. |
Sulphated ash, % wt., max. |
0.07 |
0.10 |
| * The specifications are subject to variations/development/customization. | |||