Sonipat, Delhi, India
Our Products
| MODEL | PRV-WE-60 | PRV-WE-70 | PRV-WE-80 | PRV-WE-90 |
|---|---|---|---|---|
| Pay-Off Type | Dual axis/Active pay-off | Dual axis/Active pay-off | Dual axis/Active pay-off | Dual axis/Active pay-off |
| Pay-Off bobbin size | PN400-630 | PN400-630 | PN400-630 | PN630-800 |
| Screw Diameter | Ø 60 | Ø 70 | Ø 80 | Ø 90 |
| L/D of Screw | 26 1 | 26 1 | 25 1 | 251 |
| Extrusion Capacity (kgs/hr) | 100 | 140 | 200 | 250 |
| Main Unit Power | 20HP | 30HP | 40HP | 50HP |
| Main Unit Power | 20HP | 30HP | 40HP | 50HP |
| Wire Specificatoin | Ø 0.8 -8 | Ø 1.5-12 | Ø 2- 20 | Ø 3 -25 |
| Cooling Device | Single Layer/Double | Single Layer/Double | Single Layer/Double | Single Layer/Double |
| Cooling Device | Single Layer/Double | Single Layer/Double | Single Layer/Double | Single Layer/Double |
| Accumulator Capacity | 250 | 200 | 200 | 200 |
| Capstan Power | 3HP | 5HP | 7.5HP | 7.5HP |
| Wire Speed | MAX500 | MAX500 | MAX450 | MAX400 |
| Take-UP Type | Dual axis spool/ coiling frame packing | |||
| Take-Up bobbin size | PN500-630 | PN500-630 | PN500-630 | PN500-630 |
| Machine type | PRV-FI-WE-50+30 | PRV-FI-WE-60+40 |
|---|---|---|
| Application | Low Smoke Zero Halogen, PVC, PE, Irradiation PVC & Irradiation Polyolefin Materials | |
| Insulation wire | 0.5mm- 1.95mm (AWG#28-#12) | 0.5mm- .95mm(AWG#28-#12) |
| Max. conductor | 2.0mm | 2.0mm |
| Max insulation | 5.0mm | 5.0mm |
| Precise Diameter Control | ±0.003mm | ±0.003mm |
| Max. Speed | Max.500m/min | Max.800m/min |
| Application | CL-15D | CL-17D | CL-22D |
|---|---|---|---|
| Number of Dies | 15 | 17 | 22 |
| Max inlet wire dia | 2.5 | 0.6 | 1.2 |
| Min outlet wire dia | 0.55 | 0.1 | 0.15 |
| Drawing speed | 180m/min | 600m/min | 600m/min |
| Power | 11KW | 4KW | 7.5KW |
| Transmission type | Synchronous belt driving, Ac frequency conversion speed control | ||
| Cone pulleys | Imported mould steel vacuum annealing treatment | ||
| Cooling system | The drawing capstan is cooled by the full immersion method | ||
| Tension system | Precision potentiometer automatic adjustment | ||
| Winding device | Ball screw wire rod winding device, stepper motor, or servo motor drive | ||
| Control type | “AC frequency conversion+PLC program controller+Man machine interface+constant tension”, whole digital logic control |
||
| Drawing material | S.S wire, steel wire for rope, steel cord wire, galvanized steel wire, silicon pellet cutting wire and so on |
||
| The motor power is decided by the tensile
strength of the drawing material |
| Machine Model | PRV-ST-630 | PRV-ST-800 | PRV-ST-1000 | PRV-ST-1250 |
|---|---|---|---|---|
| Core OD | Ф 0.5-Ф3.0mm | Ф 0.8-Ф3.0mm | Ф 0.1-Ф5.0mm | Ф 1.0-Ф5.0mm |
| Max Stranding OD | Ф 12mm | Ф 20mm | Ф 25mm | Ф 30mm |
| Traverse Pitch | 2-12mm | 3-20mm | 3-30mm | 3-35mm |
| Speed | Max800rpm | Max600rpm | Max500rpm | Max450rpm |
| Twisting Pitch | 20-200mm | 20-300mm | 20-400mm | 30-500mm |
| Pay-off Bobbin Size | Ф 500mm | Ф 500-Ф630mm | Ф 500-630mm | Ф 500-Ф630mm |
| Take-Up Bobbin Size | Ф 630mm | Ф 800mm | Ф 1000mm | Ф 1250mm |
| Machine Model | PRV-BT-H-500 | PRV-BT-H-630 |
|---|---|---|
| Conductor Dia. | Ф0.32mm-Ф1.2mm | Ф0.32mm-Ф1.2mm |
| Pay-Off | Max.1000rpm.(2000Twist) | Max.750rpm.(1500Twist) |
| Take-Up | Max.2000rpm.(4000Twist) | Max.1500rpm.(3000Twist) |
| Line Speed | Max.300M/min | Max.300M/min |
| Pitch | Min.9.0mm | Min.9.0mm |
| Bobbin Size Max. | Ф500*0.w.375mm Max. | Ф630*.0.w.475mm |
| Bobbin Loading & Unloading | Electric Elevating System | Electric Elevating System |
Technical Parameters
| MACHINE TYPE | PRV-NF- WE-20+35+20 | PRV-NF-WE-30+65+40 | PRV-NF- WE-30+80+40 |
|---|---|---|---|
| Applied Material | FM-PE, PE Material | ||
| Conductor Dia | Ø 0.2-0.8mm | Ø0.5-2.27mm | Ø 2.5-3.0mm |
| Finished Wire | Ø1.5-3.0mm | Ø 3-14mm | Ø 12-30mm |
| Power | 25KW | 45KW | 55KW |
| Machine Type | PRV-FW-WE-50-26D | PRV-FW-WE-70-26D | PRV-FW-WE-80-25D |
|---|---|---|---|
| Screw Diameter | Ø50mm | Ø70mm | Ø80mm |
| Screw Specifications | L/D-26 : 1 10- 100rpm | L/D-26 : 1 10-80rpm | L/D-26: 1 10-70rpm |
| Extrusion Capacity | 80kgs/hr | 140kgs/hr | 200kgs/hr |
| Line Speed (MAX) | 200m/min | 150m/min | 150m/min |
| Pay-off size | Ø300mm | Ø300mm | Ø300mm |
| Extruder, Capstan,
Take-up motors (kw) |
10+ 3 +1.5 | 20 + 5 + 2.2 | 30 + 7.5 + 3.7 |
| Max. NUMBER OF
CORES EXTRUSION |
1 – 16 | 1 – 64 | 1 – 80 |
Technical Parameters
| Machine Model | PRV-PTFE-35 | PRV-PTFE-45 | PRV-PTFE-60 | PRV-PTFE-80 | PRV-PTFE-90 | PRV-PTFE-100 | PRV-PTFE-120 |
|---|---|---|---|---|---|---|---|
| Payoff Line Type | Double Axis | Double Axis | Double Axis | Double Axis | Double Axis | Double Axis | Double Axis |
| Payoff Bobbin Size | PN-400-630 | PN-400-630 | PN-630-800 | PN-400-630 | PN-630-800 | PN-400-630 | PN-400-630 |
| Screw Diameter | Ø35 | Ø45 | Ø60 | Ø80 | Ø90 | Ø100 | Ø120 |
| L/D of Screw | 30-40:1 | 30-40:1 | 30-50:1 | 30-50:1 | 30-50:1 | 30-50:1 | 30-50:1 |
| Main Unit Power | 4 KW | 4 KW | 4 KW | 5.5 KW | 5.5 KW | 7.5 KW | 7.5 KW |
| Wire Spec. | Ø0.8-2.0 | Ø1.5-3.0 | Ø2.5-5.0 | Ø4.0-6.0 | Ø5.0-8.0 | Ø8.0-12.0 | Ø10.0-18.0 |
| Cooling Device | Single Layer | Single Layer | Single Layer | Single Layer | Single Layer | Single Layer | Single Layer |
| Accumulator Capacity | 30 | 30 | 30 | 30 | 30 | 30 | 30 |
| Capston Power | 1.5 KW | 1.5 KW | 2.2 KW | 2.2 KW | 3.7 KW | 5.5 KW | 5.5 KW |
| Wire Speed | 20m | 20m | 15m | 12m | 8 m | 8 m | 5 m |
| Take-up Line Type | Axis Packing | Axis Packing | Axis Packing | Axis Packing | Axis Packing | Axis Packing | Axis Packing |
| Receiving Reel | PN400-630 | PN400-630 | PN500-630 | PN500-800 | PN630-1000 | PN800-1250 | PN800-1250 |
| Take-up Line Power | 1.5 KW | 1.5 KW | 2.2 KW | 3.7 KW | 5.5 KW | 5.5 KW | 5.5 KW |
| Machine Model | PRV-WP-04A-1.8T | PRV-WP-04A-3.0T | PRV-WP-04A-4.0T |
|---|---|---|---|
| Power Supply | AC2220v 50/60Ghz | AC220V 50/60GHZ | AC220V 50/60GHZ |
| Pressing Force | 1800 Kg | 3000Kg | 4000Kg |
| Motor Power | 0.55KW | 1.0KW | 1.5KW |
| Feed Length | 22mm | 32mm | 42mm |
| Copper Strip Width | 2/4/6 mm | 6/8/10 mm | 6/8/10 mm |
| Machine Volume | 310 x 450 x 480mm | 330 x 600 x 630 mm | 430 x 700 x 730 mm |
| Weight | 45 Kg | 110 Kg | 130 Kg |
| Model Type | PRV-CW-1246 | PRV-CW-1860 |
|---|---|---|
| Traverse Height (mm) | 40-100 | 60-180 |
| Coiler Max OD (mm) | Ф400 | Ф600 |
| Coiler Min OD (mm) | Ф140-200 | Ф200-300 |
| Range of Wire (mm) | Ф1-5 | Ф2-16 |
| Speed (mts/min) | 200 | 150 |
| Wrapping Speed (pcs/min) | 2 | 1.5 |
| MODEL | PRV-CS-150 | PRV-CS-240 |
| Power | AC 220 V 50/60 Hz | AC 220 V 50/60 Hz |
| Cutting Length | 30 mm ~ 99999.9 mm | 100 mm ~ 99999.9 mm |
| Front End Stripping Length | 1 ~ 300 mm | 1 ~ 300 mm |
| Back End Stripping Length | 1 ~ 150 mm | 1 ~ 300 mm |
| Conduit Diameter (mm) | 30, 24, 19, 12, 9 | 47, 35, 25, 18, 9 |
| Conductor Diameter | 6 ~ 150 Sq. mm | 6 ~ 240 Sq. mm |
| Cutting Tolerance | < 0.2% | < 0.2% |
| Processing Speed | 600 ~ 2000 Pcs. / Hr. (200 mm Length) | 600 ~ 1500 Pcs. / Hr. (200 mm Length) |
| Blade Material | Tungsten Steel | Tungsten Steel |
| Speed | 1 ~ 10 Adjustable | 1 ~ 10 Adjustable |
| Drive | 8 Wheel Drive, Servo Motor, Accuracy 0.1 mm | 8 Wheel Drive, Servo Motor, Accuracy 0.1 mm |
| Dimensions | 760 x 470 x 480 mm | 960 x 570 x 580 mm |
| MODEL | ZLT250/17 | ZLT250/21 |
|---|---|---|
| Power Control | Dual Inverter | Dual Inverter |
| Input Wire | 2.6-3.0mm | 2.6-3.0mm |
| Output Wire | 0.4-1.2mm | 0.4-1.2mm |
| Maximum Line Speed | 1800M/min | 1800M/min |
| Maximum Number of Dies | 17 | 21 |
| Mechanical Elongation | 25%+18.7% | 18.4%+15% |
| Construction of The Machine Body | Casting + steel plate welded and annealed | Casting + steel plate welded and annealed |
| Drawing Capstan | Tungsten carbide | Tungsten carbide |
| Final Capstan | 250mm | 250mm |
| Drawing /taking up Motor | AC55kw/ac11kw | AC55kw/ac11kw |
| Take-up Type | SN500 or SN630 (optional) | Sn500(sn630)500x300x345 |
| Transmission type | Gear drive | Gear drive |
| Tension adjustment | Buffer Rod with air cylinder and rocker’s arm | Buffer rod with air cylinder and rocker’s arm |
| Correction System | Automatic Digital Control of Take-up | Automatic digital Control of Take-up |
| Max Loading Capacity | 200Kg (SN500) or 500kg (SN630) | 200Kg (SN500) or 500kg (SN630) |
| Power Supply | 415V/50Hz | 415V/50Hz |
| Lubricant Capacity | 100L/Min | 100L/Min |
| Lubrication type | Lubrication by full immersion | Lubrication by full immersion |
| Brake | Disk Type Brake | Disk Type Brake |
| Annealing Capacity | 85Kva | 85Kva |
| Annealing voltage | Max. 6.5V | |
| Annealing Current | 1000A | 1000A |
| Steam Consumption | 0.2-0.30Mpa < | 10-12m3/H, 0.2-0.30Mpa |
| Cooling Water Consuption | 12-18m3/h,0.2-0.25Ampa | 12-18m3/h,0.2-0.25Ampa |
| Air Consumption | 20-30m3/h,0.4-0.6Ampa | 20-30m3/h,0.4-0.6Ampa |
| Dimensions(lxwxh) | 9 x 3 x 3.5 M | 9 x 3 x 3.5 M |
| Weight | 7000Kg | 7000Kg |
| Name | DL40-7 | DL400-9 | DL400A-9 | DL400-11 | DL400-13 |
|---|---|---|---|---|---|
| Wire Inlet Size | max8.0mm | max8.0mm | max8.0mm | max8.0mm | max8.0mm |
| Wire Finished Dia | Ø2.6-Ø3.5mm | 2.0-3.5mm | 2.0-3.5mm | 1.6-3.5mm | 1.2-3.5mm |
| Max Speed | Ø1000M/min | 1200M/min | 1500M/min | 1500M/min | 1500M/min |
| Die Size | Max55mm | Max55mm | Max55mm | Max55mm | Max55mm |
| Elongation | 42%-21% | 42%-21% | 46-8% | 46-8% | 46-8% |
| Capstan Dia | Ø400mm | Ø400mm | Ø500mm | Ø400mm | Ø500mm |
| Fix Speed
Capstone Dia |
400mm | 400mm | 400mm | 400mm | 400mm |
| Main Motor
Power |
AC132kw | AC160kw | AC160kw | AC200kw | AC200kw |
| Fix Speed
Motor Power |
AC55kw | AC55kw | AC55kw | AC55kw | AC55kw |
| Rotation Dia
Motor Power |
AC400w | AC400w | AC400w | AC400w | AC400w |
| Capstan Dia | Ø400mm | Ø400mm | Ø500mm | Ø400mm | Ø500mm |
| Pump Motor
Power |
1.1KW | 1.1Kw | 4Kw | 4Kw | 4Kw |
| Overall
Dimensions |
4.36X2.7X1.2M | 5.36X2.7X1.2M | 6.8X1.8X1.2M | 7.9X1.8X1.2M | 9X1.8X1.2M |
| Net weight | 7000Kg | 8500Kg | 13000Kg | 15000Kg | 17000Kg |
| Wire Size (Min) | TY hard wire product speed (m/min) | ||||
|---|---|---|---|---|---|
| DL400-7 | DL400-9 | DL400A-9 | DL400-11 | DL400-13 | |
| Ø1.20 | 1200 | ||||
| Ø1.60 | 1200 | 1200 | |||
| Ø2.0 | 1000 | 1000 | 1000 | 1000 | |
| Ø2.60 | 900 | 900 | 900 | 900 | 900 |
| Ø3.00 | 700 | 700 | 700 | 700 | 700 |
| Ø3.50 | 600 | 600 | 600 | 600 | 600 |
| MODEL | 17DHT | 24DHT | SMD205T | SMD206T |
|---|---|---|---|---|
| Power control | Dual-inverter | Dual-inverter | Dual-inverter | Dual-inverter |
| Wire Inlet Dia | 0.75-1.6mm | 0.5-1.2mm | 0.95-1.65mm | 0.95-1.65mm |
| Wire Finished Dia | 0.2-0.5mm | 0.1-0.32mm | 0.15-0.4mm | 0.15-0.4mm |
| Max Wire Speed | 2000M/min | 2000M/min | 2000M/min | 2000M/min |
| Max No. Of Dies | 17(18) | 24 | 24 | 26 |
| Transmission Type | Advanced Flat Belt Drive | Advanced Flat Belt Drive | Advanced Flat Belt Drive | Advanced Flat Belt Drive |
| Mechanical Elongation | 15%+8.7% | 13%+8.7% | 15%+13% | 15%+15% |
| Capstan | Ceramic Plasma | Ceramic Plasma | Ceramic Plasma | Ceramic Plasma |
| Construction Of The Machine Body | Steel-plated welded vertical four shafts. | Steel-plated welded vertical four shafts. | Steel-plated welded vertical four shafts. | Steel-plated welded vertical four shafts. |
| Fix Speed Capston Dia | 206mm | 206mm | 206mm | 206mm |
| Capston Dia(Max) | Ø242mm | Ø242mm | Ø242mm | Ø242mm |
| Spool Bobbin Size | Ø300x215x270mm | Ø300x215x270mm | Ø300x215x270mm | Ø300x215x270mm |
| Bobbin Loading & Unloading Type | Expansion Shaft or Single cone | Expansion Shaft or Single cone | Expansion Shaft or Single cone | Expansion Shaft or Single cone |
| Max Loading Capacity | 50Kg | 50Kg | 50Kg | 50Kg |
| Traversing Unit | Synchronous motor and Flat Belt | Synchronous motor and Flat Belt | Synchronous motor and Flat Belt | Synchronous motor and Flat Belt |
| Main Motor | 15Kw | 11Kw | 15Kw | 18Kw |
| Spooler Motor | 4Kw | 4Kw | 4Kw | 4Kw |
| Correction System | Automatic Digital Control of Take-up | Automatic Digital Control of Take-up | Automatic Digital Control of Take-up | Automatic Digital Control of Take-up |
| Tension Control | Weight Type Tension Pulley | Weight Type Tension Pulley | Weight Type Tension Pulley | Weight Type Tension Pulley |
| Lubrication Type | Spray Type | Spray type | Spray type | Spray type |
| Brake | Magnetic Brake | Magnetic Brake | Magnetic Brake | Magnetic Brake |
| Lubrication Type For Bearing | Without Oil | Without Oil | Without Oil | Without Oil |
| Annealing control | 3Pole DC current output | 3Pole DC current output | 3Pole DC current output | 3Pole DC current output |
| Annealing Capacity | 0Kva | 21Kva | 30Kva | 30Kva |
| Annealing Voltage | 0-57V | 0-57V | 0-57V | 0-57V |
| Annealing Current | 400A | 300A | 400A | 400A |
| Connect Load | 19Kw+30kva | 15Kw+30kva | 19Kw+30kva | 19Kw+30kva |
| Power Source | 415V/50Hz | 415V/50Hz | 415V/50Hz | 415V/50Hz |
| Lubricant Capacity | >50L/Min | >50L/Min | >50L/Min | >50L/Min |
| Steam Consumtion | 6-9Kg/h 0.2-0.3Mpa(6kw) | 6-9Kg/h 0.2-0.3Mpa(6kw) | 6-9Kg/h 0.2-0.3Mpa(6kw) | 6-9Kg/h 0.2-0.3Mpa(6kw) |
| Air consumption | 15-25M3/h 0.4-0.6Mpa | 15-25M3/h 0.4-0.6Mpa | 15-25M3/h 0.4-0.6Mpa | 15-25M3/h 0.4-0.6Mpa |
| Gross Weight | 3000kg | 3000kg | 3000kg | 3000kg |
| Application | CL-20D Double Head | CL-20D Single Head |
|---|---|---|
| Number of Dies | 20 | 20 |
| Max inlet wire dia | 0.8 | 0.8 |
| Min outlet wire dia | 0.12 | 0.12 |
| Drawing speed | 800m/min | 800m/min |
| Drawing speed | 800m/min | 800m/min |
| Power | 4KW×2 | 4KW |
| Transmission type | Synchronous belt driving, Ac frequency conversion speed control | |
| Cone pulleys | Imported Die steel vacuum heat treated | |
| Cooling system | The drawing capstan is cooled by the full immersion method | |
| Tension system | Precision potentiometer automatic adjustment | |
| Winding device | Ball screw wire rod winding device, stepper motor, or servo motor drive | |
| Control type | “AC frequency conversion+PLC program controller+Man machine interface+constant tension”, whole digital logic control |
|
| Drawing material | S.S wire, steel wire for rope, steel cord wire, galvanized steel wire, silicon pellet cutting wire and so on |
|
| The motor power is decided by the tensile strength of the drawing material. |
| MODEL | 1800C | |
|---|---|---|
| Name | Parameter | Remarks |
| Dimensions | 1300mm X 5000mm X 3100mm | |
| Total Weight | 8500 KG | |
| Total power | 415V / 115kw | Can be Customized a Variety of Voltage |
| Crushing Capacity | 8000-12000KG / 10H | |
| Processing Range | φ0.15mm-φ30mm | Good Separation Effect Than 0.2mm |
Belt conveyor is a continuous conveyor, which consists of a closed loop conveyor belt as the traction and bearing member, which bypasses the front and on the tensioning drum, a continuously moving conveyor belt to complete the task.
| MODEL | C-500 |
|---|---|
| Effective Width (mm) | 500 |
| Power (kw) | 1.5 |
| Length (mm) | 3.5 |
| Category | Polymer (black) |
| Structural Features | Supporting Roller |
This type tears uniaxial crusher principle. Co-blade spindle 27, the interior of the cutter head 2 and the crusher tooth groups each set of shear knife rotates. Due to the biasing force generated by the rotation of the material crushed. The machine is driven by the drive shaft is rotated by the large gear box. A housing body portion, the holder, the security guard, hopper and other parts. Special tool material is made of tool steel with a special treatment, the unique shape design, during operation lyses, tearing, extruding and other effects. The waste crusher is widely used in wires, cables, PVC, PE, PP, PS and ABS plastic, glass, and CCL scrap, waste rubber (such as: waste tires), wood plastic waste pipe, the bulk material broken material. Any shape of the crushed material, a frame type, box type, hollow, cylindrical, spherical and various irregular shapes can be. The device is equipped with a hydraulic auxiliary feeding means, so that the material crushing more efficient and fully.
| Name | Parameter | Remark |
|---|---|---|
| Name | Crusher | |
| Dimensions | 1900mm X 1500mm X 2500mm | |
| weight | 1900KG | |
| Feed Inlet Size | 750mm X 500mm | |
| Blade | Knife 27, Fixed Knife 2 | 15KG, Packed Volume of 320mm X 150mm X 80mm |
| Motor Power | 30KW | |
This equipment has a hopper, the body, the spindle, and other components constitute. The machine consists of a drive motor through a V-belt pulley transmitted to the device spindle, spindle motor, driven by high-speed rotation. By the left side portion of the body casing, liner, right casing, bearings, and bearing components. Star-shaped spindle section from the spindle, seat, blades, and other parts. broken star-shaped machine spindle (knife 10, fixed knife 4) continue to be a rotary shear breaking crude product was cut into approximately 3 ~ 5mm plastic skin with a copper core mixture.
| Name | Parameter | Remark |
|---|---|---|
| Name | 2ndCrusher | |
| Feed inlet size | 810mm X 280mm | |
| Blade | Knife 10, fixed knife 4 | Co-45KG, Packed Volume of 350mm X 180mm X 180mm |
| Motor Power | 55KW | |
| Motor Power | 55KW | |
| The Particle Size (mesh) | ⌀2.5 mm (determined by sieving) | 605mm X 410mm |
The machine is working, the plastic used to separate the mixture, without adding water
| Name | Parameter | Remark |
|---|---|---|
| Name | Air Seperator | |
| Fan Speed | 2900r / min | |
| A Vibratory Separator Web Area | Sorting Quality ≥99% | Co-45KG, Packed Volume of 350mm X 180mm X 180mm |
| Fan power | 3KW * 2 | |
| Local Oscillator Power | 2.2KW X 2 | |
| Vibration frequency | 30-60HZ | Domestic frequency 50HZ, frequency can be customized to 60HZ |
| Hair frequency | 30-60HZ | Domestic frequency 50HZ, frequency can be customized to 60HZ |
| Name | Parameter |
|---|---|
| Motor Power Feeding Conveyor | 2.2KW X 2 |
| Name | Parameter | |
|---|---|---|
| Name | Dust Removing Device | |
| Motor Power | (3KW + 3KW + 0.18KW) X 2 | |
| Bag | 1000mm X φ200mm X 2 | |
| Dust bag | 2500mm X φ400mm X 2 | |
| Application | CL-200 | CL-250 | CL-300 | CL-400 |
|---|---|---|---|---|
| Wire inlet dia | Ø0.6mm ~Ø0.8mm | Ø1mm ~Ø1.5mm | Ø1.5mm ~Ø1.8mm | Ø2.2mm ~Ø2.4mm |
| Wire outlet dia | Ø0.2mm ~Ø0.3mm | Ø0.35mm~0.45mm | Ø0.5mm ~Ø0.6mm | Ø0.8mm ~Ø1.4mm |
| Max No. of Dies | 17 | 17 | 15 | 15 |
| Horizontal tour | Horizontal tour-step pulley type | |||
| Control system | PLC Frequency conversion control | |||
| Mechanical reduction | 15% | 15% | 15% | 15% |
| Capstan slip ratio | 15% | 15% | 15% | 15% |
| Max line speed | 200m/min | 150m/min | 120m/min | 100m/min |
| Annealed Treated Welded Steel Plates | Annealed treatment of weld steel plate | |||
| Horizontal tandem step pulley type | Vacuum annealing treatment of die steel | |||
| Max. dia. of step pulley | Ø170mm | Ø170mm | Ø230mm | Ø230mm |
| Take-up capacity | About 15kg | About 20kg | About 25kg | About 40kg |
| Main engine power | 5.5Kw | 7.5Kw | 7.5Kw | 11Kw |
| The transmission method of the main engine | Synchronous Wheel, Synchronous Belt, Flat belt | |||
| Shaft sealing method | Mechanical Seal (Automatically compensation) | |||
| Braking method | Free braking | |||
| Available power | 380V 50Hz/ 75Hz | 380V 50Hz/ 75Hz | 380V 50Hz/ 75Hz | 380V 50Hz/ 75Hz |
| Outline dimension (mm) | L2350 x W1100 x 1800 | L2470 x W1200 x 1800 | ||
| Weight (kg) | 1450kg | 1500kg | 2300kg | 2400kg |
| Machine Model | PRV-1250 |
|---|---|
| Drum size | PN800-PN1250 |
| Coil width | 600-950 |
| Cable diameter | ≤25 |
| Max Load Capacity | 4T |
| Speed(rpm) | 18.8-47.6 |
| Motor size | 1.1 |
| Motor size | 1.1 |
| MODEL | PRV-WP-120 | PRV-WP-400 | PRV-WP-750 |
|---|---|---|---|
| Power | AC 220 V 50 Hz | AC 220 V 50 Hz | AC 220 V 50 Hz |
| Disc Diameter | 200 mm | 250 mm | 300 mm |
| Winding Speed | 0~99 Adjustable | 0~99 Adjustable | 0~99 Adjustable |
| Size (mm) | 300x220x310 | 450x450x500 | 500x500x600 |
| Weight | 12Kg | 15Kg | 18Kg |
| Power | 120W | 400W | 750W |
| MODEL | PRV-WP-1T | PRV-WP-1.5T | PRV-WP-2.0T | PRV-WP-3.0T | PRV-WP-4.0T | PRV-WP-6.0T |
|---|---|---|---|---|---|---|
| Power Supply | AC 220 V 50 Hz. | AC 220 V 50 Hz. | AC 220 V 50 Hz. | AC 220 V 50 Hz. | AC 220 V 50 Hz. | AC 220 V 50 Hz. |
| Pressing Force | 1000 Kg. | 1500 Kg. | 2000 Kg. | 3000 Kg. | 4000 Kg. | 6000 Kg. |
| Motor Power | 0.35 KW | 0.55 KW | 0.75 KW | 1.0 KW | 1.5 KW | 2.2 KW |
| Travel Length | 30 mm | 30 mm | 30 mm | 30 mm | 30 mm | 30 mm |
| Machine Size (mm) | 460 x 210 x 220 | 230 x 210 x 580 | 275 x 225 x 670 | 275 x 245 x 670 | 300 x 265 x 680 | 830 x 360 x 320 |
| Machine Weight | 25 Kg. | 40 Kg. | 50 Kg. | 60 Kg. | 95 Kg. | 120 Kg. |
| Applicator Type | Only side feed Cannot be removed only Blades can be changed | Side Chain Feed Back Chain Feed Single Feed | Side Chain Feed Back Chain Feed Single Feed | Side Chain Feed Back Chain Feed Single Feed | Side Chain Feed Back Chain Feed Single Feed | Side Chain Feed Back Chain Feed Single Feed |
| MODEL | PRV-WE-60 | PRV-WE-70 | PRV-WE-80 | PRV-WE-90 |
|---|---|---|---|---|
| Pay-Off
Type |
Dual-axis/
Active pay-off |
Dual-axis/
Active pay-off |
Dual-axis/
Active pay-off |
Dual-axis/
Active pay-off |
| Pay-Off
bobbin size |
PN400-630 | PN400-630 | PN400-630 | PN630-800 |
| Screw
Diameter |
Ø 65 | Ø 70 | Ø 80 | Ø 80 |
| L/D of Screw | 26: 1 | 26: 1 | 25: 1 | 25:1 |
| Extrusion
Capacity (kgs/hr) |
100 | 140 | 200 | 250 |
| Main Unit
Power |
20HP | 30HP | 40HP | 50HP |
| Wire
Specification |
Ø 0.8 -8 | Ø 1.5-12 | Ø 2- 20 | Ø 3 -25 |
| Cooling
Device |
Single Layer/
Double |
Single Layer/
Double |
Single Layer/
Double |
Single Layer/
Double |
| Accumulator
Capacity |
250 | 200 | 200 | 200 |
| Capstan Power | 3HP | 5HP | 7.5HP | 7.5HP |
| Wire Speed | MAX500 | MAX500 | MAX450 | MAX400 |
| Take-UP Type | Dual axis
spool/ coiling |
Dual axis
spool/ coiling frame packing |
Dual axis
/ coiling |
Dual axis
spool/ coiling |
| Take-Up
bobbin size |
PN500-630 | PN500-630 | PN500-630 | PN500-630 |
| Take-Up
Power |
4HP | 4HP | 5HP | 5HP |
