Mild steel manifolds are typically fabricated from MS square tubing. Pipe fittings for supply, return and distribution ports are welded to the tube. MS manifolds are Powder coated with PU Paint specified for highly corrosive cooling water applications. Manifolds are equipped with Brass Hose nipple, pre-drilled mounting holes and screws for ease in pairing and installation.

Features and Benefits of both type manifolds

1. Various port sizes available.2. Brass Y Strainer attached.3. Pre-drilled mounting holes.4. Single or parallel manifold.5. Pressure gauge attachments (optional).6. Leakage proof.

Manifolds are common auxiliaries in a plastics injection molding shop. They are key components of mold water cooling circuits. Their primary function is to route cooling water from the tower or chiller to the water passages in the mold, then collect the warmer water leaving the mold, at turbulent flow rates, and return it to the external cooling water loop. In contrast, manufactured manifolds are engineered products that provide a convenient means to neatly arrange multiple water hoses. More importantly, they are designed to supply the mold water passages with adequate cooling water, then collect the warmer turbulent water flowing from the mold and return it to the external cooling water loop. Properly sized supply and return manifolds keep the backpressure effect from the return manifold leg of the cooling loop to a minimum.

Stainless steel manifolds are typically made from 304 square tubing. Pipe fittings for supply, return and distribution ports are welded to the tube. SS manifolds are often specified for highly corrosive cooling water applications. Manifolds are equipped with Brass Hose nipple, pre-drilled mounting holes and screws for ease in pairing and installation.

Mild steel manifolds are typically fabricated from MS square tubing. Pipe fittings for supply, return and distribution ports are welded to the tube. MS manifolds are Powder coated with PU Paint specified for highly corrosive cooling water applications. Manifolds are equipped with Brass Hose nipple, pre-drilled mounting holes and screws for ease in pairing and installation.

Features and Benefits of both type manifolds

1. Various port sizes available.2. Brass Y Strainer attached.3. Pre-drilled mounting holes.4. Single or parallel manifold.5. Pressure gauge attachments (optional).6. Leakage proof.

Manifolds are common auxiliaries in a plastics injection molding shop. They are key components of mold water cooling circuits. Their primary function is to route cooling water from the tower or chiller to the water passages in the mold, then collect the warmer water leaving the mold, at turbulent flow rates, and return it to the external cooling water loop. In contrast, manufactured manifolds are engineered products that provide a convenient means to neatly arrange multiple water hoses. More importantly, they are designed to supply the mold water passages with adequate cooling water, then collect the warmer turbulent water flowing from the mold and return it to the external cooling water loop. Properly sized supply and return manifolds keep the backpressure effect from the return manifold leg of the cooling loop to a minimum.

Stainless steel manifolds are typically made from 304 square tubing. Pipe fittings for supply, return and distribution ports are welded to the tube. SS manifolds are often specified for highly corrosive cooling water applications. Manifolds are equipped with Brass Hose nipple, pre-drilled mounting holes and screws for ease in pairing and installation.