Parth India

Byculla, Mumbai, Maharashtra

The enclosures are of single skin design, constructed in 3mm marine grade aluminum and or steel and are used in communications and Telecom organizations.

Protects sensitive electronic equipment from harsh conditions that would overwhelm a typical rack enclosure. Ideal for use in factories, construction areas, utility plants, warehouses and other areas with limited space that are high in moisture, dust and debris. Fully compliant to IP54 standards.

Protection from falling dirt, dust, drips, splashes and accidental contact with personnel

Adjustable mounting depths from 3" to 32.5" inches

Front door has ventilating louvers

Built-in removable dust filter that can be replaced with standard furnace filters (20" x 24" x 1")

4 large, high-performance fans in front door that pull air through the enclosure, from front to rear

2 cable ports allow cable access while maintaining dust and moisture resistance

Locking, reversible front door

Locking, removable solid side panels

Fully assembled for quick installation

Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) compliance

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

Ems wall mount rack is ideal solution for small networks.ems wall mount rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.conforms to din 41494 or equivalent iso standards.Adjustable 19 equivalent mounting ems wall mount rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or achrelic glass door with lock and key.Standard color is grey, white or black.

ems wall mount rack is ideal solution for small networks.ems wall mount rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. it occupies less space.features:good ventilation and heat dispersing. powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.conforms to din 41494 or equivalent iso standards.adjustable 19 equivalent mounting ems wall mount rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.depth adjustable mounting slots.provision to mount the cooling fans onthe top panel. front tinted or achrelic glass door with lock and key.standard color is grey, white or black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Floor Standing Racks are versatility designed to address various requirements for Servers, Network Data Centers, Audio Video, Telecom and Lab Applications.Racks are fabricated out of CRCA Sheet, CNC programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface Finish: Powder Coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced Lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsNOTE: - Customized model also undertaken on request. Different color option with powder coatingStandard Accessories:19 HorizontalVertical Cable Manager.19 Vertical Power Distribution Unit.19 Shelf 19 Keyboard Tray19 cooling Fan Trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling Legs (Set of Four)Captive hardware (pack of 20).Earthing strips

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks. EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space. Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards. Adjustable 19 â�� equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space. Depth adjustable mounting slots. Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key. Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks. EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space. Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards. Adjustable 19 � equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space. Depth adjustable mounting slots. Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key. Standard color is Grey, White or Black.

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

EMS Floor Standing Racks are versatility designed to address various requirements for Servers, Network Data Centers, Audio Video, Telecom and Lab Applications.Racks are fabricated out of CRCA Sheet, CNC programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface Finish: Powder Coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced Lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsNOTE: - Customized model also undertaken on request. Different color option with powder coatingStandard Accessories:19 HorizontalVertical Cable Manager.19 Vertical Power Distribution Unit.19 Shelf 19 Keyboard Tray19 cooling Fan Trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling Legs (Set of Four)Captive hardware (pack of 20).Earthing strips

EMS Floor Standing Racks are versatility designed to address various requirements for Servers, Network Data Centers, Audio Video, Telecom and Lab Applications.Racks are fabricated out of CRCA Sheet, CNC programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface Finish: Powder Coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced Lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsNOTE: - Customized model also undertaken on request. Different color option with powder coatingStandard Accessories:19 HorizontalVertical Cable Manager.19 Vertical Power Distribution Unit.19 Shelf 19 Keyboard Tray19 cooling Fan Trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling Legs (Set of Four)Captive hardware (pack of 20).Earthing strips

EMS Floor Standing Racks are versatility designed to address various requirements for Servers, Network Data Centers, Audio Video, Telecom and Lab Applications.Racks are fabricated out of CRCA Sheet, CNC programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface Finish: Powder Coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced Lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsNOTE: - Customized model also undertaken on request. Different color option with powder coatingStandard Accessories:19 HorizontalVertical Cable Manager.19 Vertical Power Distribution Unit.19 Shelf 19 Keyboard Tray19 cooling Fan Trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling Legs (Set of Four)Captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

EMS FLOOR STAND RACK Consists of total designed for Server, Network Data Centers, Audio Video, Telecom and Lab Applications. Racks are fabricated out of CRCA Sheet CNC programmed, punched, bended, welded and powder coated with highest quality standard.

EMS FLOOR STAND RACK are of the following Size:

1. EMS 9U Floor Stand Rack.
2. EMS 12U Floor Stand Rack.
3. EMS 15U Floor Stand Rack.
4. EMS 17U Floor Stand Rack.
5. EMS 22U Floor Stand Rack.
6. EMS 24U Floor Stand Rack.
7. EMS 27U Floor Stand Rack.
8. EMS 32U Floor Stand Rack.
9. EMS 36U Floor Stand Rack.
10. EMS 42U Floor Stand Rack.
11. EMS Open Rack.

*Features:-

- Conforms to DIN 41494 or equivalent ISO Standards.

-Adjustable 19 equivalent mounting verticals provide the better mounting flexibility, and maximizes the usable mount space.

-Depth adjustable mounting slots.

-Surface Finish : Degressing, Pickling, Phosphoric Powder coating. The powder coating is 80 m -100 m.

-Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.

-Double section side panel, each panel can be easily assembled separately .

-Top and bottom wiring channel can be closed and adjustable.

-Backside with a pair of vertical cable management .

-With earthing kit.

-Advanced Lock.

-Optional plinth to meet under base wiring, ventilation and rat proof.

-Adjustable feet and heavy duty castor are available at the same, static loading : 1000 kg.

-Installation simple. Racks are shipped in ready to use condition.

-Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting rails.

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

EMS Floor Standing Racks are versatility designed to address various requirements for Servers, Network Data Centers, Audio Video, Telecom and Lab Applications.

Racks are fabricated out of CRCA Sheet, CNC programmed, punched, bended, welded and powder coated with highest quality standards.

Conforms to DIN 41494 or equivalent ISO Standards.

Features:

Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.

Depth adjustable mounting slots.

Surface Finish: Powder Coated through 7 tank process. The powder coating is 80 -100 microns.

Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.

Double section side panel, each panel can be easily assembled separately.

Top and bottom wiring channel can be closed and adjustable.

Pair of vertical cable management systems provided in the rear.

Earthing kit provided. Advanced Lock.

Optional plinth to meet under base wiring, ventilation and rat proof.

Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.

Installation simple. Racks are shipped in ready to use condition.

Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting rails

NOTE: - Customized model also undertaken on request. Different color option with powder coating

• Standard Accessories:
• 19 Horizontal Cable Manager.
• 19 Horizontal Power Distribution Unit.
• 19 Cantilever Shelf.
• 19 cooling Fan Trays with 2 fan capacity to take care of heat pocket at specific location.
• Castor wheel with two breaks.
• Captive hardware (pack of 20)

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

EMS Wall Mount Rack is Ideal solution for small networks.EMS Wall Mount Rack are the products having a variety of mounting solution for small networking equipment in areas where floor space is at a premium. It occupies less space.Features:Good ventilation and heat dispersing. Powder coated to protect against rust, oxidization, scratches, lacquer peeling, strong acid, and alkali erosion.Conforms to DIN 41494 or equivalent ISO Standards.Adjustable 19 equivalent mounting EMS Wall Mount Rack are best efficient software configuration product technology provide the best product quality and fastest delivery in the industry verticals provide the better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Provision to mount the cooling fans onthe top panel. Front tinted or Achrelic glass door with lock and key.Standard color is Grey, White or Black.

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips

Ems floor standing racks are versatility designed to address various requirements for servers, network data centers, audio video, telecom and lab applications.Racks are fabricated out of crca sheet, cnc programmed, punched, bended, welded and powder coated with highest quality standards.Conforms to din 41494 or equivalent iso standards.Adjustable 19 mounting verticals provides better mounting flexibility, and maximizes the usable mount space.Depth adjustable mounting slots.Surface finish: powder coated through 7 tank process. The powder coating is 80 -100 microns.Curved perforated front door and double section rear door enable equipment protection, reliable operation with ventilation rate above 80%.Double section side panel, each panel can be easily assembled separately.Top and bottom wiring channel can be closed and adjustable.Pair of vertical cable management systems provided in the rear.Earthing kit provided. Advanced lock.Optional plinth to meet under base wiring, ventilation and rat proof.Adjustable feet and heavy duty castors are available at the same, static loading 1000 kg.Installation simple. Racks are shipped in ready to use condition.Suitable to meet the complex and changing requirement of networks and datacenters. Flexibility to have half length or full length mounting railsnote: - customized model also undertaken on request. Different color option with powder coatingstandard accessories:19 horizontalvertical cable manager.19 vertical power distribution unit.19 shelf 19 keyboard tray19 cooling fan trays with 24 fan capacity to take care of heat pocket at specific location.Castor wheel with two breaks.Leveling legs (set of four)captive hardware (pack of 20).Earthing strips