PEPL is in the process of developing Electrical Transmission Poles. These Poles can be a replacement to the bulky Transmission Towers. They would also help in substantially reducing the Civil & Structure cost thus incurred as per the present practice of using Lattice structure.

Optional Accessories

Antenna mounting Platform
Antenna mounts
Staggered step bolts for safety cable or
staggered cage ladder with rest platform.
Earthing arrester
Aircraft anti collision beacon
Stainless steel cable ties
Pre cast concrete equipment
Housing

Self-supporting towers are supported on ground or on building and they act as cantilever trusses in carrying the wind and seismic loads. Though the weight of these towers is more they require less base area and are suitable in many situations. Hence most of the Telecom Cell Towers are self-supporting towers.

Steel towers can be constructed in number of ways but most efficient use of material is achieved by using open steel lattice. The use of an open lattice avoids presenting the full width of structure to the wind but enables the construction of extremely light in weight and stiff structures. Hence most of the Telecom Cell structures are lattice structures.

PEPLoffers the following Self Supporting Towers :-
1 Based on cross section of tower
Square Towers
Rectangular Towers
Triangular Towers
Delta Towers

2. Based on type of material sections
Angular Towers
Hybrid Towers (Legs tubes and bracings angles)

3. Based on placement of tower
Ground Based Towers
Roof Top Towers

The High Mast with Mobile crown Raising and Lowering gear is designed for the raising and lowering of the luminaries of flood lights mounted brackets to the ground level for maintenance by means of mechanical winch and wire rope arrangement.

Bottom shaft is provided with base plate and door opening and middle and top shafts as per the height of the Mast required.

High Mast supplied with Luminaire ring , Head Frame, Centralizing Arm, Stainless Steel Wire Rope, Electrical Cable, Disconnectors, Junction and Distribution Box, Mechanical Winch, Power Tool, Latching (Optional), Pulleys and Top Conapy.

POWER is the key infrastructural ingredient in the countries economic growth. Recognizing this as an area of current and future growth, the company has created a separatePower Pylon Division, for the turnkey construction of66-KV, 132-KV, 220-KV, 400-KVtransmission lines and sub-station structures.

As aTurnkey Transmission Line specialists, we are capable of developing and drafting tower drawings, site surveys and right-of-way studies, fabricating and hot-dip galvanizing towers, constructing tower foundations, erecting lattice structures and stringing conductors. Our crews are well trained and highly productive. We have a complete set of erection and stringing tools required to complete a single circuit or double circuit line.

This division is managed by capable and experienced engineers, who have been in the business of commissioning.

The division takes pride in quality, on time, and safe construction. All employees are trained in safety procedures, and given regular instructions in current erection procedures and practices.