Vadodara, Gujarat, India
Our Products
Used as a primary insulation in a variety of electrical equipment, the Teflon Adhesive Tape, which we offer, is used in heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails and roll covers. Low friction surface and abrasion resistant, are features that set apart the Teflon Adhesive Tape, which we provide. These Teflon Adhesive Tapes come standard with liner.
We are an Authorized Dealer Of Elite Make D.C. Motor. We offer a very wide range of DC Motors that are very efficient to run all types of agro-industrial equipment. These DC Motors offer high performance, durability, efficiency and long service life. We make available the DC Motors that are easy to maintain and use in all types of environments as they do not rust and are unaffected by change in environment temperatures, moisture, dust and grime. We are counted amongst the reliable Suppliers of DC Motors.
Ideal For Running
We are engaged in supplying of Torque Controller in the global markets. Made from quality material using cutting-edge technology, these Torque Controllers are highly demanded by the clients. Moreover, we are providing Torque Controller at market leading prices. Offering competitive deals, we are a dependable Supplier of the Torque Controller from Vadodara.
Attributes
Description : Torque controller used to control 3-Phase A.C motor Torque
Technical Data
We source fully accessorized and specifically designed Temperature Thermocouples as per the specific need of the clients. These Temperature Thermocouples are known for measuring high temperatures accurately. The Temperature Thermocouples, which we provide, are rugged, dependable and low-cost. We are reliable Supplier of the Temperature Thermocouples from Vadodara.
Attributes
Availability
Types Of Sensing Tips
We are one among the dependable Suppliers of the Insulated Cables from Vadodara (Gujarat). These Insulated Cables are highly flexible and display exceptional resistance to heat, grease, hydro carbons, etc. The Insulated Cables, which we provide, are available in diverse sizes as per the clientsrequirements.
Specifications
We are engaged in offering different types of Electrical Control Panel suitable for diverse industries as well as buildings, malls, theatres, etc. Used widely in a variety of industries, the Electrical Control Panel, offered by us, is fabricated using optimum quality raw materials. These Electrical Control Panels are sourced from trusted vendors in the domain. We offer Electrical Control Panel in various dimensions of sizes & width and also provide customization according to the specifications provided by the customers. The Electrical Control Panel, which we provide, enables main incoming of electric board and generator with bus coupler, permitting all the outgoing feeders.
We provide both AC & DC type Proximity Switches of high sensitivity operating distance. All the Proximity Switches, which we provide, are water and moisture proof as per IP-67 degree on ingress protection. DC Proximity Switches have three wire available in both PNP and NPN transistor output.
Highlights
We deal in Electrical Switchgears, ET products and modular products. We provide the Electrical Switchgears for Miniature Circuit Breakers (MCBs), Residual Current Operated Circuit Breakers (RCCBs) and Distribution Boards (DBs), Relays from Schneider, ABB, L&T, C&S and Siemens. We make available Electrical Switchgears that are fitted with Contactors, Relays, Timers, Starters, Push Button, Limit Switch, MPCBs, MCB's, MCCBS, Motor Duty & Control Switch, Fuse Links, etc.
We offer a wide range of the best quality Loose Glass Wool to the clients. These Loose Glass Wools comprise of long inorganic glass fibers that are bonded by high temperature resin known for their sound insulation properties and energy conservation. The Loose Glass Wool, which we offer, finds extensive application in Sugar industry, Chemical plants, etc.
We have in store for the clients a wide range of quality Ceramic Wool made up of long cerachem fibers of alumina, silica constituents and zircon. Available in bulk fibers, papers & ropes, the temperature range for Ceramic Wool is 1000oC to 1425oC.
Applications
We are a prime Supplier of 8 Channel Scanner in India. We procure 8 Channel Scanner from the eminent vendors of the market who use the latest technology in its fabrication. Our 8 Channel Scanner is extensively used for measuring the temperature of any eight sources through a single instrument. We offer 8 Channel Scanner at market leading prices.
Attributes
Specifications
| Model | MS-5708 | MS-1208 | |
| Display | 4 digit 0.56" seven segment LED display for process value. 2 digit 0.56" seven segment LED display for Channel number. 1 digit 0.56" seven segment LED display for Process Status. | 4 digit 0.56" seven segment LED display for process value. 3 digit 0.56" seven segment LED display for Channel number. | |
| Input | 4 to 20 mA, 0 to 10V DC, RTD (PT-100 2W/3W) Or Thermocouple(J, K) | Thermocouple J OR K Type | |
| Display Scan Time | Adjustable from 2 to 99 sec | Adjustable from 2 to 99 sec | |
| Appearance & Dimensions | 192 x 96 x 144 mm | 96 x 96 x 75 mm | |
| Panel Cutout | 188 x 92 mm | 92 x 92 mm | |
| Case | M.S. sheet metal case with ABS molded Front & Back | Plastic case with ABS molded Front & Back | |
| Output | 6 or 8 relays | - | |
| Features | Grouping of inputs is possible. There can be maximum of 4 groups | - | |
| Auto / Manual Channel Scanning Facility | |||
| Optional Features | RS- 485 interface Available | ||
We are engaged in supplying Push Buttons to the clients that can be used for controlling one or more aspects of a machinery, equipment and/or industrial applications. We source the Push Buttons from reliable vendors in the industry. We are counted amongst the most trusted Suppliers of Push Buttons from Vadodara (Gujarat).
The Furnace Coil, which we provide, finds applications in various kinds of Furnaces and Ovens. These Furnace Coils can be installed in grooves or can be installed on tube depending upon the requirements of the furnaces. These Furnace Coils are also embedded in vacuum formed ceramic fiber boards. We provide the Furnace Coils, which are normally used in all types of heating furnaces like Heat Treatment industry, Petrochemical, Mining, and Engineering industries.
Technical Questions
1. What is the maximum operating temperature of your furnace or kiln?Â
2. What is the furnace supply voltage? (Volts and Hz)
3. What is the number of phases connected to your furnace? (1 or 3)
4. What is the supply current per phase? (Amps)
5. What is the total connected heating power? (KW or KVA)
6. What is the element voltage? (Volts)
7. What is the element current? (Amps)
8. What is the total number of elements in this furnace?
9. How many elements are connected in series?
10. How many parallel branches of elements?
11. What is the wire gauge of the element, if known?
12. How long is the element tail (terminal end)?
13. Is the element tail (terminal end) Single, Â Double, Â or Triple stranded?
14. If the element tail is Single, please describe the terminal end.
15. What is the outside diameter of the coiled wire element?
16. What is the overall stretched length of the element wire coil?
17. Is the element installed on a ceramic tube or in a grooved furnace wall?
18. If installed on a ceramic tube, what is the outside tube diameter and overall tube length?
19. How many ceramic tubes are used per element?
20. If element is installed in groove what is the groove diameter and groove length?
21. How many grooves are filled by each element?
Please answer as much questions as possible, rest our experts will find out. These elements are normally built as per the design / drawing provided by the customer. If you do not have design or details of existing element please get in touch with us. Our experts will help you designing the proper element by analyzing details like Power (KW), Maximum temperature, etc.
We are involved in trading of F class Fiber Glass Sleeves. Specially designed for insulation works, the Fiber Glass Sleeves, which we offer, are made using superior quality fibers and other basic materials. These Fiber Glass Sleeves find widespread applications in Nuclear Power Plants, Motor Plants, Electrical Plants and other industries. We make available the Fiber Glass Sleeves in various categories in order to fulfill the diverse industrial needs. These Fiber Glass Sleeves are supplied in the market with printed labels for easy identification.
Characteristics
We are engaged in offering Thermostat Switches. The Thermostat Switches are engineered for many years of use. We are Supplier of Girishego Thermostats without Fixing Bracket that are ideal for temperature control of Space Heater, which is used in LT & HT Switchgear & Panel Boards, etc.
Principle Of Operation : With temperature rise, the principle of differential expansion of brass tube and a Nickel/Iron (inver) Rod is used to actuate a highly accurate snap action micro gap switch located in the head which makes it keep the temperature constant within the differential i.e. A single pole, single throw, normally closed circuit breaks (opens) on rise of temperature.
Construction Of Thermostat Switches
The micro gap switch assembly is mounted on a heat resistant base, with rigid brass pillar terminals. Heavy duty Ag CDO contacts are provided for long trouble free life. A thermosetting cover with clear and precise graduations is provided along with a setting knob. Thermostat can be fixed in any position. Two fixing holes of Dia. 5mm are provided at a center distance of 58mm in Thermostat with fixing Bracket model.Â
Availability : These Thermostat Switches are available in standard stem lengths of 7"(175mm), 11" (275mm). Also Available in 110 V & 415
Specifications
| Model No. | Steam Length | Temp. Range | Standard packing | Despatch Packing |
|---|---|---|---|---|
| Round Shape Thermostat 15 Amp-250V AC | ||||
| 200-C | 175 mm | 0 – 60 oC | 25 Nos. | 100 Nos. |
| *205 – C | 175 mm | 30-85 oC | 25 Nos. | 100 Nos. |
| 208 – C | 175 mm | 25-125 oC | 25 Nos. | 100 Nos. |
| 210 – C | 175 mm | 25-150 oC | 25 Nos. | 100 Nos. |
| 215-C | 175 mm | 50-200 oC | 25 Nos. | 100 Nos. |
| *305-C | 275 mm | 25-85 oC | 25 Nos. | 100 Nos. |
| 306-C | 275 mm | 5-90 oC | 25 Nos. | 100 Nos. |
| 308-C | 275 mm | 25-125 oC | 25 Nos. | 100 Nos. |
| 310-C | 275 mm | 25-150 oC | 25 Nos. | 100 Nos. |
| 315-C | 275 mm | 25-200 oC | 25 Nos. | 100 Nos. |
| 410-C | 450 MM | 25-150 oC | 25 Nos. | 50 Nos. |
| "Popular" Model Thermostats 15 AMP 250 V.A.C | ||||
| GEC – 5 | 125 mm | 30-85 oC | 100 Nos. | 100 Nos. |
| * GEC – 7 | 175 mm | 30-75 oC | 100 Nos. | 400 Nos. |
| * GEC – 11 | 275 mm | 30-75 oC | 100 Nos. | 400 Nos. |
| Square (Big) Thermostats 15 AMP 250 V.A.C. | ||||
| *GEO – 11 | 275 mm | 30-75 oC | 25 Nos. | 100 Nos. |
| Thermal Cut-Out 20 AMP 250 V.A.C. | ||||
| TCO – 7 | 175 mm | Seat at 90 oC | 100 Nos. | 400 Nos. |
| TCO – 11 | 275 mm | Seat at 90 oC | 100 Nos. | 400 Nos. |
Note
The Rotary Cam Switches, which we make available, are sourced from experienced and most trusted vendors in the domain. These Rotary Cam Switches are fabricated to be used in diverse switching angles. We provide the Rotary Cam Switches that can be operated manually and are compact in size.
We are one of the prominent Digital Process Indicator Suppliers in India. We source Digital Process Indicator from the reliable vendors of the market. The Digital Process Indicator that we offer is used for controlling and monitoring various industrial processes. Our Digital Process Indicator is also used for controlling the temperature of water, chemicals and other substances.
Highlights
Specifications
| Model | MDI-1101-P | MDI-2101-P | MDI-3101-P | PI-401 | |
|---|---|---|---|---|---|
| Dimensions (HXWXD)mm |
96X96X100 | 72X72X85 | 48X96X120 | 48X48X100 | |
| Display | RED,3½ DIGITS, 0.56" | RED,4 DIGITS 0.4" | |||
| Range |
3½ Digits ( 0-100 or 0-200 or 0-1000 or 0-1500 or 0-199.9 ) (Factory Set) Correspond to Input |
||||
| Input | Current | 0 - 20 mA, 4 - 20 mA | |||
| Voltage | 0 -10V DC | ||||
| Power Supply | 110/230V AC ± 20%, 50 Hz, 24V AC/DC | 90-270V AC/DC, SMPS | |||
| Cut Out (mm) | 92 X 92 | 68 X 68 | 44 X 92 | 45 X 45 | |
| Mounting | Flush Panel Mounting with side clamps fixed behind the panel | ||||
To enquire about the desired product(s), just check the box and then click “Inquiry Now” button which is provided below.
Additional Information:
Payment Terms : L/C, T/T,
