Kolkata, West Bengal, India
Our Products
| Model | Capacity Tons. | Bending Cap.(length x Thick) | Dist. Between housing | Stroke Length | Stroke per minute | Ram Adjustment | Shut height ram stroke down | Table height | Depth of throat | Main motor H.P. | Ram Adjustment motor H.P. | Die space | Machine Dimensions ( LxWxH ) |
Approx. weight Kgs. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MP8 215 | 20 | 1525 x 1.6 | 990 | 50 | 30 | 40 | 200 | 750 | 240 | 3 | Manual | 1525 x 125 | 1800 x 1100 x 2300 | 2150 |
| MP8 229 | 25 | 2030 x 1.6 | 1220 | 50 | 30 | 40 | 200 | 760 | 240 | 5 | 1 | 2030 x 150 | 2300 x 1150 x 2300 | 2450 |
| MP8 620 | 65 | 2030 x 4 | 1220 | 75 | 30 | 75 | 220 | 800 | 300 | 7.5 | 1.5 | 2030 x 200 | 2300 x 1150 x 2300 | 3300 |
| MP8 825 | 80 | 2540 x 4 | 1700 | 75 | 30 | 75 | 220 | 800 | 300 | 10 | 1.5 | 2540 x 200 | 2900 x 1500 x 2850 | 5500 |
| MP8 1025 | 100 | 2540 x 5 | 1700 | 75 | 25 | 75 | 275 | 800 | 300 | 15 | 2 | 2540 x 254 | 2900 x 1800 x 2850 | 6900 |
| MP8 1031 | 100 | 3125 x 4 | 1700 | 75 | 25 | 75 | 275 | 800 | 300 | 15 | 2 | 3125 x 200 | 3400 x 1800 x 3400 | 7800 |
| MP8 1225 | 120 | 2540 x 5 | 1700 | 75 | 25 | 75 | 275 | 900 | 300 | 20 | 2 | 2540 x 254 | 2900 x 1800 x 3400 | 8300 |
| MP8 1231 | 125 | 3125 x 5 | 1700 | 75 | 25 | 75 | 275 | 900 | 300 | 20 | 2 | 3125 x 254 | 3400 x 1800 x 3400 | 8900 |
| MP8 1420 | 140 | 2030 x 8 | 1420 | 75 | 25 | 75 | 275 | 900 | 300 | 25 | 2 | 2030 x 254 | 2600 x 2160 x 3200 | 6500 |
| MP8 1531 | 150 | 3125 x 6 | 1900 | 75 | 25 | 75 | 275 | 900 | 300 | 25 | 2 | 3125 x 254 | 3400 x 1800 x 3400 | 9400 |
| MP8 2031 | 200 | 3125 x 8 | 1900 | 75 | 20 | 75 | 275 | 900 | 300 | 30 | 2 | 3125 x 254 | 3400 x 2000 x 3600 | 12500 |
| No | CAPACITY | PN-3 Mild Steel 45 Kg/mm’ | PN-5 Mild Steel 45 Kg/mm7 | PN-8 Mild Steel 45 Kg/mm’ | ||
|---|---|---|---|---|---|---|
| 1 | SHEARING STRAIGHT CUTTING | From the edge Inside with starting hole Sheet without Starting hole | mm mm mm | 3.2 3.2 2.5 | M- 5 5 4 | -Z- 8 8 6 |
| 2 | NIBBLING | From the edge Inside with starting hole Sheet without Starting hole | mm mm mm | 2.5 2.5 2 | 4 4 3 | 6 6 4 |
| 3 | RECTANGULAR NOTCHING | Sheet thickness / width of notch | mm | 2/8 | 3/10 | 4/12 |
| 4 | FIGURE CUTTING SLOT | Sheet thickness Sheet thickness / width of slot | mm | 2 | 3 | 9 |
| 5 | CUTTING | Sheet thickness Sheet thickness / width of slot | mm | 2.5/8 | 4/10 | 5/10 |
| 6 | LOUVER CUTTING | Sheet thickness Sheet thickness / depth of bead | mm | 225 | 3 | 4 |
| 7 | BEADING | Sheet thickness Sheet thickness / depth of bead | mm | 2/4 | 2.5/5 | 3/6 |
| 8 | FOLDING | Sheet thickness / depth of fold | mm | 2/6 | 2.5/8 | 3/10 |
| 9 | FLANGING | Sheet thickness / height of flanqe | mm | 2/8 | 3/12 | 3/15 |
| 10 | PUNCHING | Sheet thickness | mm | 1.5 | 2.5 | 3.0 |
| 11 | CIRCLE CUTTING OUTSIDE/INSIDE | Sheet thickness | mm | 2 | 3 | 5 |
