In any ESD protected work place or Cleanroom environment, such as electronics manufacturing and repairing, protection against static electricity and contaminants dust is important. Electro-Static Dissipative (ESD) shoe covers are used to protect against static discharge and contamination that may cause damage to materials being handled. However, just use of ESD shoe cover is not enough. Other products for ESD protection must also be used.
Our imported ESD shoe covers are made of electro-conductive fabric. These lint free non-woven shoe covers possess low resistance to electric charge that act as conduit for dissipating static charge from the operator and the object to the atmosphere.
Our Non Woven Disposable ESD Shoe Covers with conductive strip can be used in ESD Protected Areas (EPA) and Cleanroom environment as well as medical facilities to prevent the dust on the shoes from contaminating the area and ground personnel to minimize human body discharges to ESD sensitive devices. The shoe cover should be worn on the shoe and the conductive strip inserted into the shoe for efficient grounding path to static dissipative floor. The floor can be grounded using ESD Floor Mat. The shoe cover also has a slip resistant coating to minimize users from slipping on wet floors.
ESD-Safe or AntiStatic chairs are specifically designed and manufactured for use in the electronics and electrical industry and cleanroom environment that are sensitive to static electricity. These ESD Chairs prevent the build up of static electricity by grounding electricity to the earth. However, it is necessary that the surface area is also properly grounded with ESD Mat. Other Products for ESD Protection must also be used. Just the ESD Chair is not going to provide any protection against static electricity. By placing these chairs on any grounded floor mat, you can be assured that any static charge generated for any reason will be safely dissipated before they can do any damage.
Static shielding bags and ESD pink poly bags are used to store PCB and electronic components for protection against static electricity. Now, let us first understand the difference between static shielding bags and pink poly bags: can cause damage to PCB and electronic components parts. Therefore, it is important to use Antistats and metallized PET to modify the bags in a way so that it can either dissipate static charge or prevent the charge from penetrating the bag.
ESD-Safe or AntiStatic chairs are specifically designed and manufactured for use in the electronics and electrical industry and cleanroom environment that are sensitive to static electricity. These ESD Chairs prevent the build up of static electricity by grounding electricity to the earth. However, it is necessary that the surface area is also properly grounded with ESD Mat. Other Products for ESD Protection must also be used. Just the ESD Chair is not going to provide any protection against static electricity. By placing these chairs on any grounded floor mat, you can be assured that any static charge generated for any reason will be safely dissipated before they can do any damage.
We are one of the leading dealer and supplier of ESD Aprons Anti-Static Apron in India. We offer economical and best quality of ESD Apron in different sizes, specification and designs. Our specially designed and stitched aprons are available in both half or full size.
These ESD-Safe Aprons are made of fabric consisting of Polyester, cotton and conductive fibers in the form of square conductive grid spaced every 5mm to dissipate static charge at a higher rate. The fabric is compatible in Cleanroom as well. These aprons can also be custom designed and made as per customer specifications incorporating pockets and logos.
Our imported ESD-Safe PCB Storage Racks PCB Holders are made from high quality moulded conductive polypropylene. These PCB Racks or PCB Holders are best suitable for storage of PCB in any PCB Assembly Line and Handling unit or during transportation.
Apart from holding PCBs in an orderly manner, these PCB Holders also provide protection against static electricity. We offer both I-Type and L-Type PCB Racks.
In any ESD protected work place, such as electronics manufacturing and repairing, protection against static electricity is important. Electro-Static Dissipative (ESD) round caps and hats are used to protect against static discharge and contamination that may cause damage to materials being handled. However, just use of ESD cap and hat is not enough. Other products for ESD protection must also be used.
Our imported ESD caps and hats are made of electro-conductive fabric. These lint free woven and non-woven caps and hats possess low resistance to electric charge that act as conduit for dissipating static charge from the operator and the object to the atmosphere.
Goot XFC-110 is a Digital SMD Rework Station with Close Loop Temperature Control. This is one of the best semi-automatic Hot Air SMD Rework Station available today. The inbuilt Vacuum System helps rework and repairing of any SMD without any damage to the SMD Components, Surrounding Components or the PCB. The station is equipped with state-of-art Low Heat Absorption Technology and Perfect Thermodynamic Nozzle design.
The Goot CXR-41 is a 30W Soldering Iron with Ceramic Heater for Fast Thermal Recovery and Long Heater Life. This is state-of-art soldering iron best suitable for SMD Soldering.The Goot CXR-41 soldering iron is compact and very light-weight. Wide range of long-life soldering tips are also available.
An ESD Mat or Antistatic Mat is a specially manufactured rubber or vinyl mat with conductive bottom layer to eliminate static electricity. These antistatic mat can be layed on floor or table top. These mats are specially manufactured with controlled low resistance. These ESD Mats need to be grounded with the help of thin metal sheet to be layed on all four sides of the mat and then grounded using grounding coil. A resistor can also be used to slow down the discharge rate. An antistatic insulating mat without the copper layer below it would not provide any grounding.
An ESD Mat or Antistatic Mat is a specially manufactured rubber or vinyl mat with conductive bottom layer to eliminate static electricity. These antistatic mat can be layed on floor or table top. These mats are specially manufactured with controlled low resistance. These ESD Mats need to be grounded with the help of thin metal sheet to be layed on all four sides of the mat and then grounded using grounding coil. A resistor can also be used to slow down the discharge rate. An antistatic insulating mat without the copper layer below it would not provide any grounding.
NP Lead free Solder Wire Bar Balls have compliance with all the requirements of RoHS directives. These products offer It has good mechanical strength, higher yield, higher reliability and excellent wetting. NP Lead-free solder is suitable for use in any wave soldering and dip soldering process. 99.3Sn0.7Cu (Tin-Copper) 96.5Sn3.5Ag (Tin-Silver) 96.5Sn3.0Ag0.5Cu (Tin-Silver-Copper) Other alloys are available upon request.
Alpha Cookson is a leading manufacturer; exporter and supplier of world-class, trusted and widely used solder bar sticks for wave soldering, Pot Dip Soldering, Hot Air Level soldering. Cookson range of solder bar includes both leaded (Tin-Lead) and Lead-Free solder alloys. Alpha manufacturers these products with the highest performance for wave and dip soldering process. All Cookson products are manufactured to ISO 12224-1 specification and test methods.
ESD or Electrostatic Discharge or simply Static Electricity can be harmful in a static sensitive or Cleanroom environment causing losses in production. In order to prevent damage due to static electricity, ionizers are widely in addition to other ESD Control Products. A complete electrostatic management and prevention setup can prevent damages due to electrostatic discharge (ESD). Such complete setup must include comprehensive grounding of all conductors, elimination of insulators, specification and grounding of dissipative materials use of air ionizers.
Our imported ESD-Safe PCB Storage Racks PCB Holders are made from high quality moulded conductive polypropylene. These PCB Racks or PCB Holders are best suitable for storage of PCB in any PCB Assembly Line and Handling unit or during transportation.
Apart from holding PCBs in an orderly manner, these PCB Holders also provide protection against static electricity. We offer both I-Type and L-Type PCB Racks.
Kilews Brushless Power Torque Cordless Electric Screwdrivers Kilews screwdrivers are widely used in India and worldwide and are very successful and trusted brand. Low and High Torque Kilews Brushless Power Torque Cordless Electric Screwdrivers.
Kilews Auto Shut Off Industrial Cordless Brushless Power Torque Screwdrivers SKC-PTA-150 SKC-PTA-220
Asansol, West Bengal, India
