A range of Trailer mounted Cable Pulling Winches require for the installation of Power Cables where high pulling tensions are required. All of the units are designed with the operator in mind. Simple in operation and robustly engineered, these units are fitted with heavy duty diesel engines powering hydraulic transmission for smooth controlled pulling, and are fitted with a console mounted line tension indicator so that at all times the operator has a visual display of the pulling force applied.

Key Feature of Cable Pulling Winch Machine

• Double capstan system, both capstan heads are driven


• No chains between hydraulic engine and capstan system


• Hydrostatic drive


• Petrol or diesel engine


• Drum capacity for big rope lengths


• Automatic rope guidance to the drum


• Pre-tension-system


• Pulling force control by electronic measuring system with print out.


• Double axel chassis with overrunning brake, height adjustable drawbar


• Metal hood

Product Code:PP-OMC, PP-ALACPeace Power has its own line of High Voltage clamps made of Aluminum alloy 6000 series with Galvanized Steel along with S.S. Nuts & Bolts.

Advantages of using Aluminium Clamps

• In spite of its low weight, aluminium is extremely strong.


• Non-magnetic In nature


• Perfect for Heavy Duty Cables


• InflammabilityTest Performed on Aluminium Cable Clamps
  
  
  
  • Chemical test of LM6
  
  
  • Axial Load Test
  
  
  • Impact Resistance Test
  
  
  • Lateral Load Test
  
  
  • Salt Spray Test
  
  
  
  
  
  

  Sizes in single clamps Available

  
  
  
  
  • 90-105 mm
  
  
  • 105-115 mm
  
  
  • 120 mm
  
  
  • 130-150 mm
  
  
  • 150-160 mm
  
  
  
  

Product Code:PI-HJFeatures

• Leg Pump Hydraulic Jack


• Can Fit Cable Drums from 900 mm to 3000 mm


• Steardy design, internationally accepted.


• Robust & easy to use


• Lifting Capacity from 3ton to 20ton


• Designed for heavy duty use

All CO2 welded, powder coated, regular assembly suitable for cables up to 140mm dia. Steel frame fitted large waited solid aluminum roller made of pressure dye cast / large MS pipe running on rubber bushing with sealed bearings & galvanized shaft.

Used for Cable Laying in straight lengths. Suitable for LT & HT Cables.

Base roller is suitable for section between the cable drum and the start of the trench as per the site requirement. Base rollers are made of steel rollers fitted in sealed bearing running on galvanized shaft & rubber bushing for smooth rotations.

Used at the edge of the trench, so that the Cable doesnt touch the ground while going inside the trench. Suitable for LT, HT, HV & EHV Cables.

Manufacturing Material is Nylon 6 Nuts & Bolts SS & MS Nuts & Bolts Neoprene Rubber

Why Nylon Clamps ?

• High Impact Resistance


• Unaffected by corrosive Environment


• Light in Weight


• Non Conductive and Non-Magnetic In nature


• Best In case Cable is Buried in sand and Soil


• Polymer Identification


• Hardness Test


• Tensile Strength


• Melting Point test

Sizes available

• 30-50 mm


• 60-90 mm


• 100-130 mm

Distributed sensing is a technology that enables continuous, real-time measurements along the entire length of a fibre optic cable. Unlike traditional sensors that rely on discrete sensors measuring at pre-determined points, distributed sensing does not rely upon manufactured sensors but utilizes the optical fibre. The optical fibre is the sensing element without any additional transducers in the optical path.Distributed temperature sensing uses Raman Scattering to measure temperature across FOC.

Applications:

1. Power cable and transmission line monitoring (ampacity optimization).


2. Oil and Gas production.


3. Fire Detection in tunnels, special hazard buildings etc.


4. Leakage detection at dams and dikes.


5. Temperature monitoring in plant and process engineering, etc.

A range of Trailer mounted Cable Pulling Winches require for the installation of Power Cables where high pulling tensions are required. All of the units are designed with the operator in mind. Simple in operation and robustly engineered, these units are fitted with heavy duty diesel engines powering hydraulic transmission for smooth controlled pulling, and are fitted with a console mounted line tension indicator so that at all times the operator has a visual display of the pulling force applied.

Key Feature of Cable Pulling Winch Machine

• Double capstan system, both capstan heads are driven


• No chains between hydraulic engine and capstan system


• Hydrostatic drive


• Petrol or diesel engine


• Drum capacity for big rope lengths


• Automatic rope guidance to the drum


• Pre-tension-system


• Pulling force control by electronic measuring system with print out.


• Double axel chassis with overrunning brake, height adjustable drawbar


• Metal hood

• Lifting Capacities : 3.0 to 10.0 Ton


• Improved Screw Design


• Extra Strong Base Plate


• Robust and Easy to Use


• Designed for Heavy Duty Use


• Easy to Handle and Simple Operation

HDPE (High Density Polyethylene) clamps are mostly suitable for heavy duty cables as HDPE is sturdy and hard material. It is widely used for outdoor mounting of cables. It comes along with Galvanized Steel fasteners.

Test Carries Out

• Polymer Identification


• Hardness Test


• Tensile Strength


• Melting Point test


• Lateral Load test


• Axial Load test


• Impact resistance test

Stop your co-workers in their tracks with the stunning new 30-inch diagonal HP LP3065 Flat Panel Monitor. This flagship monitor features best-in-class performance and presentation features on a huge wide-aspect screen while letting you work as comfortably as possible - you might even forget you're at the office

All CO2 welded, powder coated, heavy duty assembly suitable for cables up to 160mm dia. Steel frame fitted large waited solid aluminum roller made of pressure dye cast, running on rubber bushing with sealed bearings & galvanized shaft.

Used for Cable Laying in straight lengths. Suitable for EHV Cables.

A guide roller in front of the drum which centralizes the cable from the drum into the trench. Sealed roller bearings fitted in steel roller. Mounted in heavy duty steel frame. All powder coating as well as Zinc Plating Finish.

Used for Centralizing the Cable from Drum till the trench. Suitable for LT, HT, HV & EHV Cables.

Six vertical steel rollers each running on roller bearings and mounted in heavy duty steel frame Power coated finish. These rollers are used in conjunction with horizontal rollers as per the photograph and where large diameter cables have a limited bend radius.

• Vertical roller comprises of one frame with three verticals rollers attached in it.


• Horizontal roller comprises of one frame with two horizontal rollers attached in it.

All CO2 welded, powder coated, heavy duty steel assembly suitable for laying cables as per the required site condition. Steel rollers running on bearings & galvanized shaft.

HTC Touch - in High Definition. Watch music videos and streaming content in awe-inspiring high definition clarity for a mobile experience you never thought possible. Seductively sleek, the HTC Touch HD provides the next generation of mobile functionality, all at a simple touch. Fully integrated with Windows Mobile Professional 6.1, ultrafast 3.5G, GPS, 5MP camera, plus lots more - all delivered on a breathtakingly crisp 3.8" WVGA touchscreen - you can take control of your mobile world with the HTC Touch HD.

Features

• Processor Qualcomm MSM 7201A 528 MHz


• Windows Mobile 6.1 Professional Operating System


• Memory: 512 MB ROM, 288 MB RAM


• Dimensions: 115 mm x 62.8 mm x 12 mm / 146.4 grams


• 3.8-inch TFT-LCD flat touch-sensitive screen with 480 x 800 WVGA resolution


• HSDPA/WCDMA: Europe/Asia: 900/2100 MHz; Up to 2 Mbps up-link and 7.2 Mbps down-link speeds


• Quad-band GSM/GPRS/EDGE: Europe/Asia: 850/900/1800/1900 MHz (Band frequency, HSUPA availability, and data speed are operator dependent.)


• Device Control via HTC TouchFLO 3D & Touch-sensitive front panel buttons


• GPS and A-GPS ready


• Bluetooth 2.0 with Enhanced Data Rate and A2DP for wireless stereo headsets


• Wi-Fi: IEEE 802.11 b/g


• HTC ExtUSB (11-pin mini-USB 2.0)


• 5 megapixel color camera with auto focus


• VGA CMOS color camera


• Built-in 3.5 mm audio jack, microphone, speaker, and FM radio


• Ring tone formats: AAC, AAC+, eAAC+, AMR-NB, AMR-WB, QCP, MP3, WMA, WAV


• 40 polyphonic and standard MIDI format 0 and 1 (SMF)/SP MIDI


• Rechargeable Lithium-ion or Lithium-ion polymer 1350 mAh battery


• Expansion Slot: microSD memory card (SD 2.0 compatible)


• AC Adapter Voltage range/frequency: 100 240V AC, 50/60 Hz DC output: 5V and 1A


• Special Features: FM Radio, G-Sensor

• Designed to place at the end of the manhole or pit entrance to ease the cable in.


• Triple Aluminium roller on tubular steel frame.


• Used for laying the cable inside a manhole.


• Suitable for LT, HT, HV & EHV Cables.