Mumbai, Maharashtra, India
Verified
Add Review
Our Products
Distributed Acoustic Sensing uses Rayleigh Scattering to detect sound signals around OFC laid alongwith power cables underground or any other utility such as oil and gas pipelines, overhead power cables, etc. for security purpose.
All CO2 welded, powder coated, regular assembly suitable for cables up to 140mm dia. Steel frame fitted large waited solid aluminum roller made of pressure dye cast / large MS pipe running on rubber bushing with sealed bearings & galvanized shaft.
Used for Cable Laying in straight lengths. Suitable for LT & HT Cables.
Base roller is suitable for section between the cable drum and the start of the trench as per the site requirement. Base rollers are made of steel rollers fitted in sealed bearing running on galvanized shaft & rubber bushing for smooth rotations.
Used at the edge of the trench, so that the Cable doesnt touch the ground while going inside the trench. Suitable for LT, HT, HV & EHV Cables.
"All CO2 welded, painted, heavy duty assembly suitable for cables up to 160mm dia.
Steel frame fitted on all four sides with solid steel rollers / aluminium roller made of pressure dye cast running on sealed bearings & galvanized shaft. Bend guideroller contains 2 vertical & 2 horizontal rollers.
Used for Cable Laying inside HDPE / PVC pipe. Suitable for LT, HT, HV & EHV Cables.
Stop your co-workers in their tracks with the stunning new 30-inch diagonal HP LP3065 Flat Panel Monitor. This flagship monitor features best-in-class performance and presentation features on a huge wide-aspect screen while letting you work as comfortably as possible - you might even forget you're at the office
All CO2 welded, powder coated, heavy duty assembly suitable for cables up to 160mm dia. Steel frame fitted large waited solid aluminum roller made of pressure dye cast, running on rubber bushing with sealed bearings & galvanized shaft.
A guide roller in front of the drum which centralizes the cable from the drum into the trench. Sealed roller bearings fitted in steel roller. Mounted in heavy duty steel frame. All powder coating as well as Zinc Plating Finish.
Used for Centralizing the Cable from Drum till the trench. Suitable for LT, HT, HV & EHV Cables.
Six vertical steel rollers each running on roller bearings and mounted in heavy duty steel frame Power coated finish. These rollers are used in conjunction with horizontal rollers as per the photograph and where large diameter cables have a limited bend radius.
All CO2 welded, powder coated, heavy duty steel assembly suitable for laying cables as per the required site condition. Steel rollers running on bearings & galvanized shaft.
HTC Touch - in High Definition. Watch music videos and streaming content in awe-inspiring high definition clarity for a mobile experience you never thought possible. Seductively sleek, the HTC Touch HD provides the next generation of mobile functionality, all at a simple touch. Fully integrated with Windows Mobile Professional 6.1, ultrafast 3.5G, GPS, 5MP camera, plus lots more - all delivered on a breathtakingly crisp 3.8" WVGA touchscreen - you can take control of your mobile world with the HTC Touch HD.
Features
Power rollers work in conjunction with the cable pulling winch machine. One automated solid steel cable roller with rubber coating runs with the help of a motor. Second cable roller spring loaded is to sandwich the cable with variable cable diameter from 60mm to 180mm. Variable speed of roller rpm. Suitable for cable dia :60180 mm Weight :70 90 kgsWith grouting arrangement With VFD, Control Panel & complete power roller set arrangement.
Straight roller with V-Assembly is used at specific site where Cables are very scattered & need to be centralized while laying. Stand frame & center rollers both are made up of MS. Used for LT, HT& HV cables.
All CO2 welded, powder coated finish & using two vertical & one horizontal Aluminum rollers for taking heaviest cables round difficult corners. The assembly is of a robust construction for use in the most arduous conditions and can be linked together with stake pins provided to form a continuous corner roller system.
Used for Cable Laying at corner / bends. Suitable for LT, HT, HV & EHV Cables.
A range of Trailer mounted Cable Pulling Winches require for the installation of Power Cables where high pulling tensions are required. All of the units are designed with the operator in mind. Simple in operation and robustly engineered, these units are fitted with heavy duty diesel engines powering hydraulic transmission for smooth controlled pulling, and are fitted with a console mounted line tension indicator so that at all times the operator has a visual display of the pulling force applied.
Key Feature of Cable Pulling Winch Machine
A range of Trailer mounted Cable Pulling Winches require for the installation of Power Cables where high pulling tensions are required. All of the units are designed with the operator in mind. Simple in operation and robustly engineered, these units are fitted with heavy duty diesel engines powering hydraulic transmission for smooth controlled pulling, and are fitted with a console mounted line tension indicator so that at all times the operator has a visual display of the pulling force applied.
Key Feature of Cable Pulling Winch Machine
Distributed Acoustic Sensing uses Rayleigh Scattering to detect sound signals around OFC laid along with power cables underground or any other utility such as oil and gas pipelines, overhead power cables, etc. for security purpose.
Applications:
Stop your co-workers in their tracks with the stunning new 30-inch diagonal HP LP3065 Flat Panel Monitor. This flagship monitor features best-in-class performance and presentation features on a huge wide-aspect screen while letting you work as comfortably as possible - you might even forget you're at the office
All CO2 welded, powder coated, regular assembly suitable for cables up to 140mm dia. Steel frame fitted large waited solid aluminum roller made of pressure dye cast / large MS pipe running on rubber bushing with sealed bearings & galvanized shaft.
Used for Cable Laying in straight lengths. Suitable for LT & HT Cables.
