PEMAC Helps Clients In Proper Planning Of Entire Project

• We Are Having Different Group Of Teams That Calculate Complete Bill Of Material, Look After Timely Procurement Of Material With Timely Delivery At Site. 
• At The Same Time Help Site Team For Installation Of All Procured Material Properly That Saves Time Of Entire Project. 
• Team Gives Timely Response To Site Queries Thus Saving Precious Time Of Site Team & Minimising Overall Installation Time Of Project. 

Features :

• Two/Three Chamber Design Pre-Pressing & Full Pressing In Single Stage Crushing For Better Oil Recovery & Profitable Operation.
• Rigid Main Frame To Withstand Heavy Operating Load For Crushing Job.
• It Can Crush All Kinds Of Oil Seeds.

Our turnkey project construction services include:

• Basic engineering design, civil load data. equipment load data details 
• structural load analysis and design details 
• civil design and detailed engineering 
• civil & structural bill of material and cost estimation 
• civil foundation drawings and equipment supporting structural details 
• construction planning and procedures supervision of construction work such as, site excavation, pcc work rcc construction work, rcc plinth beam, structural column/equipment foundation.

Plant Consist of :

• Essessprocessor-Heattransfer cylinder assembly.
• Crystal distribution cum stabilizer.
• Triplex plunger reciprocating pump.
• Nitrogen gas purging system.
• Interconnecting product pipeline.
• Control panel.

Our Existing Plant Consultancy Services Services Include: 

• We In PEMAC Study The Existing System Of Entire Plant & Help Our Customers To Save Time & Improve Quality By Adding Some Automation In Plant0
• This Helps Our Clients To Improve The Accuracy Of Operation Thus Improving Quality & Saving Manpower & Hours Both.
• We Also Do Case Study & Help Client In Increasing Capacity Of Plant. 

Our Onsite Pipe Fabrication Service Include: 

• PEMAC Is Having Decades Of Experience In On Site Designing, Engineering, Fabrication Of Bulk Storage Tanks, Heavy Structures & Piping's. 
• Our Site Teams Are Masters In Executing The Erection & Fabrication Work As Per Design In Limited Time Period. 
• The Pipeline Routing At Site Are Done As Per 3D Routing Drawing Received From Our Design Department To Minimise The Losses & Time. 
• Well Planned Site Work Helps Us To Execute The Project Well Before Deadlines Of Our Clients. 

PEMAC conducts feasibility study with an objective. unbiased approach to provide information upon which decisions can be based. 

• Selection And Assessment Of Site Location, Seismic Conditions, Wind Velocity Etc. 
• Preliminary Civil And Structural Design And Cost Estimation 
• 3D Modelling

Service include :

• Plot Plan And Equipment Layout 
• Pipe Stress Analysis 
• Piping System Flexibility And Dynamic Analysis 
• Piping Design And Material Specifications
• Piping General Arrangement Drawings And Isometrics 
• Pipe Support Layout And Detail Drawings 
• Piping And Valves MTO
• 3D Modelling 

PEMAC has experience and expertise in providing wide array of Electrical & Instrumentation services to its projects clients who are planning to establish new plants or overhaul its existing plant.

Our Electrical Equipment Installation Services Include: 

• Supply, Erection, Testing And Commissioning Of Transmission/Distribution Lines. 
• Supply, Erection, Testing And Commissioning Of Power / Distribution / Dry Type/Oil Filled Transformer 
• Supply, Erection, Testing And Commissioning Of PCC And MCC Panels All Types Of Industrial Tray Working, Cable Laying And Panel Installation Works. Supply Of HT/LT Cables, Laying Of Cables And Terminations And Cable Tray Installation. Earthing & Lightening Arrester Protection Work. 
• Supply, Erection, Testing And Commissioning Of HT Panels & Distribution Boards. 
• Street Light Pole Erection. 
• Supply, Erection, Testing And Commissioning Of Motors, D.G. Set, UPS And Air Compressors. 

Our Instrumentation And Electrical Installation Services Include: 

• Supply, Erection, Testing And Commissioning Of Control Valves, Transmitters, Indicators, Controllers And Other Field Instrument And Calibration. 
• Supply, Erection, Testing And Commissioning Of Cable Laying Of Cables And Terminations And Cables Tray Installation 
• Supply, Erection, Testing And Commissioning Of PLC & DCS Systems 12 Loop Checking 

PEMAC Helps Clients In Proper Planning Of Entire Project

• We Are Having Different Group Of Teams That Calculate Complete Bill Of Material, Look After Timely Procurement Of Material With Timely Delivery At Site. 
• At The Same Time Help Site Team For Installation Of All Procured Material Properly That Saves Time Of Entire Project. 
• Team Gives Timely Response To Site Queries Thus Saving Precious Time Of Site Team & Minimising Overall Installation Time Of Project. 

Features :

• Two/Three Chamber Design Pre-Pressing & Full Pressing In Single Stage Crushing For Better Oil Recovery & Profitable Operation.
• Rigid Main Frame To Withstand Heavy Operating Load For Crushing Job.
• It Can Crush All Kinds Of Oil Seeds.

Our turnkey project construction services include:

• Basic engineering design, civil load data. equipment load data details 
• structural load analysis and design details 
• civil design and detailed engineering 
• civil & structural bill of material and cost estimation 
• civil foundation drawings and equipment supporting structural details 
• construction planning and procedures supervision of construction work such as, site excavation, pcc work rcc construction work, rcc plinth beam, structural column/equipment foundation.

Plant Consist of :

• Essessprocessor-Heattransfer cylinder assembly.
• Crystal distribution cum stabilizer.
• Triplex plunger reciprocating pump.
• Nitrogen gas purging system.
• Interconnecting product pipeline.
• Control panel.

Our Existing Plant Consultancy Services Services Include: 

• We In PEMAC Study The Existing System Of Entire Plant & Help Our Customers To Save Time & Improve Quality By Adding Some Automation In Plant0
• This Helps Our Clients To Improve The Accuracy Of Operation Thus Improving Quality & Saving Manpower & Hours Both.
• We Also Do Case Study & Help Client In Increasing Capacity Of Plant. 

Our Onsite Pipe Fabrication Service Include: 

• PEMAC Is Having Decades Of Experience In On Site Designing, Engineering, Fabrication Of Bulk Storage Tanks, Heavy Structures & Piping's. 
• Our Site Teams Are Masters In Executing The Erection & Fabrication Work As Per Design In Limited Time Period. 
• The Pipeline Routing At Site Are Done As Per 3D Routing Drawing Received From Our Design Department To Minimise The Losses & Time. 
• Well Planned Site Work Helps Us To Execute The Project Well Before Deadlines Of Our Clients. 

PEMAC conducts feasibility study with an objective. unbiased approach to provide information upon which decisions can be based. 

• Selection And Assessment Of Site Location, Seismic Conditions, Wind Velocity Etc. 
• Preliminary Civil And Structural Design And Cost Estimation 
• 3D Modelling

Service include :

• Plot Plan And Equipment Layout 
• Pipe Stress Analysis 
• Piping System Flexibility And Dynamic Analysis 
• Piping Design And Material Specifications
• Piping General Arrangement Drawings And Isometrics 
• Pipe Support Layout And Detail Drawings 
• Piping And Valves MTO
• 3D Modelling 

PEMAC has experience and expertise in providing wide array of Electrical & Instrumentation services to its projects clients who are planning to establish new plants or overhaul its existing plant.

Our Electrical Equipment Installation Services Include: 

• Supply, Erection, Testing And Commissioning Of Transmission/Distribution Lines. 
• Supply, Erection, Testing And Commissioning Of Power / Distribution / Dry Type/Oil Filled Transformer 
• Supply, Erection, Testing And Commissioning Of PCC And MCC Panels All Types Of Industrial Tray Working, Cable Laying And Panel Installation Works. Supply Of HT/LT Cables, Laying Of Cables And Terminations And Cable Tray Installation. Earthing & Lightening Arrester Protection Work. 
• Supply, Erection, Testing And Commissioning Of HT Panels & Distribution Boards. 
• Street Light Pole Erection. 
• Supply, Erection, Testing And Commissioning Of Motors, D.G. Set, UPS And Air Compressors. 

Our Instrumentation And Electrical Installation Services Include: 

• Supply, Erection, Testing And Commissioning Of Control Valves, Transmitters, Indicators, Controllers And Other Field Instrument And Calibration. 
• Supply, Erection, Testing And Commissioning Of Cable Laying Of Cables And Terminations And Cables Tray Installation 
• Supply, Erection, Testing And Commissioning Of PLC & DCS Systems 12 Loop Checking